UK BASED ∙ UK STOCK ∙ ESTABLISHED 2010
2 YEAR WARRANTY ∙ FAST DELIVERY
EXPERT TECHNICAL SUPPORT
09-FEB UGOOS AM6B+ BACK IN STOCK   30-JAN ZIDOO 8K FIRMWARE UPDATE 1.3.05   5-JAN ARYLIC LP10 ADDS QOBUZ CONNECT  
This forum was closed in October 2025 in response to sustained DDOS type attacks. It has been left up read-only to allow access to support information and downloads. Thanks to all the users who contributed over the years.

Visit futeko.com for new Audio and Video Media Players!

Author Topic: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800  (Read 110986 times)

Socrate

  • Newbie
  • *
  • Posts: 11
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #105 on: June 02, 2016, 10:26:18 PM »
One more question :
Does anyone knows how to do to see the Himedia  HDD (internal or external) on my PC connected ethernet ....

Thank you very much  ;)

Socrate

  • Newbie
  • *
  • Posts: 11
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #106 on: June 03, 2016, 01:53:08 AM »

If you have an internal HDD with media.  Add that Media to Kodi.  It will all work.
If you then plug in another usb device you will find that the internal HDD will have moved to a different device id so kodi will no longer see it.  Remove the other usb device.  Restart q10 and it will work again.


I turned off Q10 remove USB device and extract HDD, install it in Q 10 and restart.
It works again ....
Thank you  ;)

futeko.com

  • Administrator
  • Senior Member
  • *****
  • Posts: 4657
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #107 on: June 03, 2016, 08:51:20 AM »
One more question :
Does anyone knows how to do to see the Himedia  HDD (internal or external) on my PC connected ethernet ....

Thank you very much  ;)

From the FAQ thread (http://www.futeko.com/newforum/index.php?topic=711.0):

* How to share Q5/Q10 Pro internal storage / internal HDD / USB storage on a network? Turn on Samba sharing. Go Settings - More - SAMBA Service - Start. You can add password protection if you wish. This will share the internal storage, internal HDD and all attached USB storage using a Samba (Windows) network.

Socrate

  • Newbie
  • *
  • Posts: 11
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #108 on: June 03, 2016, 05:58:15 PM »
One more question :
Does anyone knows how to do to see the Himedia  HDD (internal or external) on my PC connected ethernet ....

Thank you very much  ;)

From the FAQ thread (http://www.futeko.com/newforum/index.php?topic=711.0):

* How to share Q5/Q10 Pro internal storage / internal HDD / USB storage on a network? Turn on Samba sharing. Go Settings - More - SAMBA Service - Start. You can add password protection if you wish. This will share the internal storage, internal HDD and all attached USB storage using a Samba (Windows) network.

Thank you I already tried  but this doesn't allows to see Himedia HDD from the PC ... Do I have to make other settings with the PC ??? 

dipak

  • Newbie
  • *
  • Posts: 41
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #109 on: June 04, 2016, 12:58:22 PM »
First switch on SAMBA sharing

1. From the FAQ thread (http://www.futeko.com/newforum/index.php?topic=711.0):
* How to share Q5/Q10 Pro internal storage / internal HDD / USB storage on a network? Turn on Samba sharing. Go Settings - More - SAMBA Service - Start. 

This will share the internal storage, internal HDD and all attached USB storage using a Samba (Windows) network. Use password if you want. I dont bother as it is internal network and a hassle.

2. Check you IP settings on Q10. I like to have my Q10 Pro set simialr to my pc. so ip, DNS,  subnet and WORKGROUP. Check you DNS and WORKGROUP on your main pc. (right click on Computer icon for properties and right). Check you PC IP and DNS via network control panel. Name your Q10Pro to something easy to type and recognise.

3. Reboot PC and Q10Pro. Now use network icon on your computer to see the Q10Pro. If you dont type \\IP or \\name of Q10Pro on the explorer...that will show you the Q10....open the link and get to a directory that looks like "sda". Map that to a PC drive letter.

thats it.


pcristi

  • Senior Member
  • ***
  • Posts: 1334
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #110 on: June 04, 2016, 04:30:55 PM »
Your PC is running Windows 10 check if SMB 1.0 future is enable


For easy discover from PC network group of PC need to be WORKGROUP
Easy access mediaplayer is using ip of player EX: \\192.168.1.11\share\
Check firewall rule not denied access by mistake.

One more question :
Does anyone knows how to do to see the Himedia  HDD (internal or external) on my PC connected ethernet ....

Thank you very much  ;)

From the FAQ thread (http://www.futeko.com/newforum/index.php?topic=711.0):

* How to share Q5/Q10 Pro internal storage / internal HDD / USB storage on a network? Turn on Samba sharing. Go Settings - More - SAMBA Service - Start. You can add password protection if you wish. This will share the internal storage, internal HDD and all attached USB storage using a Samba (Windows) network.

Thank you I already tried  but this doesn't allows to see Himedia HDD from the PC ... Do I have to make other settings with the PC ???

Socrate

  • Newbie
  • *
  • Posts: 11
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #111 on: June 04, 2016, 08:13:06 PM »
First switch on SAMBA sharing

1. From the FAQ thread (http://www.futeko.com/newforum/index.php?topic=711.0):
* How to share Q5/Q10 Pro internal storage / internal HDD / USB storage on a network? Turn on Samba sharing. Go Settings - More - SAMBA Service - Start. 

This will share the internal storage, internal HDD and all attached USB storage using a Samba (Windows) network. Use password if you want. I dont bother as it is internal network and a hassle.

2. Check you IP settings on Q10. I like to have my Q10 Pro set simialr to my pc. so ip, DNS,  subnet and WORKGROUP. Check you DNS and WORKGROUP on your main pc. (right click on Computer icon for properties and right). Check you PC IP and DNS via network control panel. Name your Q10Pro to something easy to type and recognise.

3. Reboot PC and Q10Pro. Now use network icon on your computer to see the Q10Pro. If you dont type \\IP or \\name of Q10Pro on the explorer...that will show you the Q10....open the link and get to a directory that looks like "sda". Map that to a PC drive letter.

thats it.


Thank you ... I got it  :D ;)

Lucklack

  • Newbie
  • *
  • Posts: 10
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #112 on: June 07, 2016, 07:49:20 AM »
I still have issue "unfortunately system ui has stopped" with new FW Q10pro v1.0.3 both stock and Custom. How can I fix it?

vdevil

  • Newbie
  • *
  • Posts: 21
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #113 on: June 07, 2016, 08:56:03 AM »
No news about the 24p problem under 1080 size ? its really a problem for me with cropped movie !!!

futeko.com

  • Administrator
  • Senior Member
  • *****
  • Posts: 4657
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #114 on: June 07, 2016, 08:58:03 AM »
I still have issue "unfortunately system ui has stopped" with new FW Q10pro v1.0.3 both stock and Custom. How can I fix it?

What do you have installed and how did you install the firmware?

It's not a common message with 1.0.3 so would be useful if the cause could be narrowed down to a particular app or action.

futeko.com

  • Administrator
  • Senior Member
  • *****
  • Posts: 4657
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #115 on: June 07, 2016, 08:58:30 AM »
No news about the 24p problem under 1080 size ? its really a problem for me with cropped movie !!!

No news except that it's being worked on by HiMedia.

Lucklack

  • Newbie
  • *
  • Posts: 10
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #116 on: June 07, 2016, 11:12:46 AM »
I flash FW 1.0.3 by Recovery Mode both Official and Custom 1.0.3 have error message : system UI crash.
I still have issue "unfortunately system ui has stopped" with new FW Q10pro v1.0.3 both stock and Custom. How can I fix it?

What do you have installed and how did you install the firmware?

It's not a common message with 1.0.3 so would be useful if the cause could be narrowed down to a particular app or action.

dorol

  • Senior Member
  • ***
  • Posts: 125
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #117 on: June 07, 2016, 04:59:38 PM »
No news about the 24p problem under 1080 size ? its really a problem for me with cropped movie !!!

No news except that it's being worked on by HiMedia.

I have 24p problem including 1080 size.

luthiensdad

  • Newbie
  • *
  • Posts: 11
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #118 on: June 09, 2016, 08:25:57 PM »
I have a question about installing firmware via pen/thumb drive. Does it have to be formatted with a certain file structure (i.e. FAT32, NTFS,etc)? Can an SD card be used? Okay, two questions.

futeko.com

  • Administrator
  • Senior Member
  • *****
  • Posts: 4657
Re: Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800
« Reply #119 on: June 10, 2016, 08:50:49 AM »
I have a question about installing firmware via pen/thumb drive. Does it have to be formatted with a certain file structure (i.e. FAT32, NTFS,etc)? Can an SD card be used? Okay, two questions.

FAT32 and USB stick only, not SD.

 

DELIVERY ∙ PAYMENT ∙ WARRANTY+RETURNS ∙ INTERNATIONAL TAX ∙ ABOUT ∙ PRIVACY ∙ NEWS ∙ CONTACT
© SDHDIGITAL LTD 2026
SITEMAP