Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800

[OlivierQC]

i agree with you, himedia serie Q is one of the best box android. this is why i have 2 boxes serie Q at home

when i bought the Q10 pro I knew, it would take few months before the issues will be fixed.

currently my q5 4k3d has a better PQ than Q10 pro, the express X engine V1 is better than V2 in my opinion, himedia know the problem and i hope it will be fixed asap, i trust them 

this is just my opinion :

when i turn on my box "by default" we should have 1080p/2160p/50hz60hz etc.../4.2.0 8bit/SDR...that's it that's all.

with a movie/demo 4K HDR, it should switch to HDR10 automatically.

my current settings :

Q10 pro
reso 1080p60hz
express X engine v2 : disable
1080p24 option disable

Sony X93C
reality creation (resolution 50)
motionflow custom mode

[salalee]

the advanced settings that i was talking about are those in the main android settings ....
yup , the q10 pro is a new box and i believe it's just a matter of time for himedia to fix all known issues through upcoming updates , since they are all software based as far as i know...

[PJDavis1970]

This update is completely taking the piss.  2 days work by a single engineer.  This is what we get after 6 WEEKS wait~?

Sorry but Himedia hardware is unfit for purpose.  They have rushed the software and now not giving hardly any after care.

I have no option but return the box as it is unfit for purpose.  This does not work how it was advertised and I honestly cannot see it working correctly for a long time.

Please explain returns polocy.

[Alter_Schwede62]

This update is completely taking the piss.  2 days work by a single engineer.  This is what we get after 6 WEEKS wait~?

That is what I was thinking after reading the Change Log.
How can they after 6 weeks release a Firmware Update, that only has some cosmetic corrections.
The most important thing, that 24Hz resp. 23.976 AutoframeSwitching is not working, still is awfull to watch, because during every movie there are micro stutterers or micro freezes.

I am really too thinking about connecting my Q5 4K and selling the Q10 Pro.

BTW I cannot understand the guys, that are writing, that everything runs smooth. It runs smooth until the first, or second middlefast or fast pan.
I think, I will try again the Q5 4K today... the 6 weeks "work" of Himedia is so ashaming.... 

[magnifico]

[flydini]

Hi guys,
Anyone can advice how to change DNS (wifi or ethernet) ? Is not working.
The red power button at remote control only shuts down, how can I reboot or standby by remote control?

[magnifico]

Hmmh? You need to disable the DHCP mode / auto mode and the you can set it up by yourself.

[Timmyboy]

OTA update?

Also would like to know this...

[vdevil]

If i update the firmware with the little button on the back ... all of my setting is erase ? kodi, movie, scaping etc ? or he keep all on my box and just update the firmware ?

[stack]

Yes, you will lose everything.
It's strongly recommended to use this option,  it's not OK only to update over the already installed.

[flydini]

Hmmh? You need to disable the DHCP mode / auto mode and the you can set it up by yourself.

Still not working. DNS section is passive, it is not possible to type anything.

[stack]

Move the  Auto to off.
Scrol down with a keyboard for example to the DNS and it should be changeable.
Press Submit button.

[flydini]

You mean Ethernet/Advanced/Network Auto Connect? I tried off and on, DHCP / connected and disconnected, all the same. DNS 1 and DNS 2 is still passive. At previous fw, I changed DNS but now I can't.

[stack]

More easier way is
Main screen - Settings - Network - Choose Ethernet and then Move the  Auto to off.
Scroll down with a keyboard for example to the DNS and it should be changeable.
Press Submit button.

[UHD-TVler]

I have updated my Q10 PRO to 1.0.3.

HDR is working now.
My OLED LG EF9509 shows now HDR, if the native Media-Player plays a HDR-Stream.
Very good!