FAST DELIVERY EXPERT TECH SUPPORT
UK STOCK   2 YEAR WARRANTY
MEDIA BOX     DELIVERY INFO    FORUM    CONTACT
Zidoo UHD3000
  
Professional UHD 4K Dolby Vision HDR10+ Home Theatre 2x 3.5" HDD Media Player with Hi-Fi audio.
  INCLUSIVE OF EXPRESS 1-2 DAY DELIVERY 

Author Topic: Q5/Q10 Pro Custom Firmware  (Read 764434 times)

casino187

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #705 on: November 16, 2017, 03:57:13 PM »
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup.  Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.

I noticed some issues starting with 2.05 with 4k files and I have an installed internal HDD.  it would pause for a few seconds and then start back up.  I applied the 2.06 patch and it still does it.  It doesn't seem to do it all of the time though.  I've been just sticking to 1080p for now.

Flash3d

  • Newbie
  • *
  • Posts: 22
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #706 on: November 16, 2017, 04:06:11 PM »
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup.  Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.

Not need be difference, but if you have time do  dirty/clean downgrade to CFW v2.0.5 and apply patch for CFW v2.0.6 then check speed play over samba.

I'm currently on CFW v2.0.5, if I do the patch to CFW v2.0.6 and I run into the Samba issue again: Will I be able to roll back to CFW v2.0.5 with retaining my current settings/setup?  (this is done by running the CFW v2.0.5 firmware "normally" within the OS I guess?)

ps your link to the CFW v2.0.6 patch sends me to a general/sign-up page of mediafire.
ps Maybe I just should stick with CFW v2.0.5 but my OCD part says I need the latest FW  :P


casino187

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #707 on: November 16, 2017, 04:12:15 PM »
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup.  Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.

Not need be difference, but if you have time do  dirty/clean downgrade to CFW v2.0.5 and apply patch for CFW v2.0.6 then check speed play over samba.



I'm currently on CFW v2.0.5, if I do the patch to CFW v2.0.6 and I run into the Samba issue again: Will I be able to roll back to CFW v2.0.5 with retaining my current settings/setup?  (this is done by running the CFW v2.0.5 firmware "normally" within the OS I guess?)

ps your link to the CFW v2.0.6 patch sends me to a general/sign-up page of mediafire.
ps Maybe I just should stick with CFW v2.0.5 but my OCD part says I need the latest FW  :P

I didn't even notice any differences with 2.06, but what samba issues are you having? I had issues initially and it was because under my network settings, i left the dns server 2 blank. I couldn't see the hard drive from other computers on my network. i used 192.168.1.2 for the DNS and it solved it.  (my router is 192.168.1.1)

Flash3d

  • Newbie
  • *
  • Posts: 22
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #708 on: November 16, 2017, 04:22:50 PM »
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup.  Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.

Not need be difference, but if you have time do  dirty/clean downgrade to CFW v2.0.5 and apply patch for CFW v2.0.6 then check speed play over samba.



I'm currently on CFW v2.0.5, if I do the patch to CFW v2.0.6 and I run into the Samba issue again: Will I be able to roll back to CFW v2.0.5 with retaining my current settings/setup?  (this is done by running the CFW v2.0.5 firmware "normally" within the OS I guess?)

ps your link to the CFW v2.0.6 patch sends me to a general/sign-up page of mediafire.
ps Maybe I just should stick with CFW v2.0.5 but my OCD part says I need the latest FW  :P

I didn't even notice any differences with 2.06, but what samba issues are you having? I had issues initially and it was because under my network settings, i left the dns server 2 blank. I couldn't see the hard drive from other computers on my network. i used 192.168.1.2 for the DNS and it solved it.  (my router is 192.168.1.1)

Buffering/hiccups during higher bit rate scenes.

pcristi

  • Senior Member
  • ***
  • Posts: 1303
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #709 on: November 16, 2017, 10:44:06 PM »
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup.  Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.

Not need be difference, but if you have time do  dirty/clean downgrade to CFW v2.0.5 and apply patch for CFW v2.0.6 then check speed play over samba.

I'm currently on CFW v2.0.5, if I do the patch to CFW v2.0.6 and I run into the Samba issue again: Will I be able to roll back to CFW v2.0.5 with retaining my current settings/setup?  (this is done by running the CFW v2.0.5 firmware "normally" within the OS I guess?)

ps your link to the CFW v2.0.6 patch sends me to a general/sign-up page of mediafire.
ps Maybe I just should stick with CFW v2.0.5 but my OCD part says I need the latest FW  :P

Link fixed. Sorry I forgot to change # to ? on mediafire link.

Flash3d

  • Newbie
  • *
  • Posts: 22
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #710 on: November 17, 2017, 06:56:35 AM »
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup.  Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.

Not need be difference, but if you have time do  dirty/clean downgrade to CFW v2.0.5 and apply patch for CFW v2.0.6 then check speed play over samba.

I'm currently on CFW v2.0.5, if I do the patch to CFW v2.0.6 and I run into the Samba issue again: Will I be able to roll back to CFW v2.0.5 with retaining my current settings/setup?  (this is done by running the CFW v2.0.5 firmware "normally" within the OS I guess?)

ps your link to the CFW v2.0.6 patch sends me to a general/sign-up page of mediafire.
ps Maybe I just should stick with CFW v2.0.5 but my OCD part says I need the latest FW  :P

Link fixed. Sorry I forgot to change # to ? on mediafire link.

No problem, about my question:

I'm currently on CFW v2.0.5, if I do the patch to CFW v2.0.6 and I run into the Samba issue again: Will I be able to roll back to CFW v2.0.5 with retaining my current settings/setup?  (this is done by running the CFW v2.0.5 firmware "normally" within the OS I guess?)

Is that the way to do it?  thx

carl

  • Newbie
  • *
  • Posts: 41
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #711 on: November 19, 2017, 01:09:53 PM »
The "HDMI suspend" function seems not to work in the 2.0.6 version. I had it working in the 2.0.4 version.
Anyone has this same issue?
THanks!

arnego

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #712 on: November 20, 2017, 05:19:04 PM »
hello

i wanted to se if some one can help me,i have been sitting here for 12hours now and trying to figure ut how to write to re name the firmware,
i have Q10 pro android 7 and i will uppgrade firmware from pcristi and dont now what im doing wrong.
i hope some one can help me.

best regards peder in sweden

casino187

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #713 on: November 20, 2017, 05:24:57 PM »
hello

i wanted to se if some one can help me,i have been sitting here for 12hours now and trying to figure ut how to write to re name the firmware,
i have Q10 pro android 7 and i will uppgrade firmware from pcristi and dont now what im doing wrong.
i hope some one can help me.

best regards peder in sweden
what is your current firmware version?

Moonraker

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #714 on: November 20, 2017, 10:37:54 PM »
Hi, I used the patch update from CTW 2.05 to CTW 2.06 and also used apk file to update Kodi to 17.6
This results in 2 problems:
1)
I am now loosing my wired LAN connection to my NAS within 1 or 2 minutes after boot. Never had that with any of the prior upgrades.

2)
Other problem is with Kodi 5.1 raw audio when streaming. Works sometimes and sometimes only digital noise.
I use the ** repository with real debrid. Lately on 2.05 that resulted in several streams with no digital audio at all, only 2.0 but some others worked okay. Hoped this was solved in 2.06. Seems better, but as I said: not stable yet.

Suggestions are appreciated!

Gaia

  • Newbie
  • *
  • Posts: 31
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #715 on: November 22, 2017, 01:23:26 PM »
Why does not Imprex HDR10 video work?
(CFW: 2.0.6)
« Last Edit: November 22, 2017, 01:34:11 PM by Gaia »

pcristi

  • Senior Member
  • ***
  • Posts: 1303
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #716 on: November 22, 2017, 01:48:24 PM »

mamachan

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #717 on: November 25, 2017, 08:48:49 AM »
Good morning, I am a new member.

I would like to know what the difference is between the custom and the official firmware (Q10 Pro)

Thanks

Mount81

  • Senior Member
  • ***
  • Posts: 1090
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #718 on: November 26, 2017, 08:03:01 AM »
Hello!

Does the full CWF 2.0.6 (update_Q10Pro_(update&themed&Kodi17.5.1)-HMD-2.0.6 2017-10-25.164125) include the auto framerate patch for HiMedia Player?

Thanks!

pcristi

  • Senior Member
  • ***
  • Posts: 1303
    • View Profile
Re: Q5/Q10 Pro Custom Firmware
« Reply #719 on: November 26, 2017, 11:34:52 AM »
Hello!

Does the full CWF 2.0.6 (update_Q10Pro_(update&themed&Kodi17.5.1)-HMD-2.0.6 2017-10-25.164125) include the auto framerate patch for HiMedia Player?

Thanks!

NO. Auto framerate patch need to install separately by user witch need it.

 

DELIVERY    WARRANTY / RETURNS    PAYMENT    ABOUT
Privacy Policy. © SDHDIGITAL LTD 2021