Author Topic: Q5 and HDMI-CEC problem (Read 39492 times)

looun · « **on:** June 04, 2015, 03:19:57 PM »

Some user have problem with HDMI-CEC, control with only one remote control many device.
When Q5 HDMI is connect to AV-receiver all device lost CEC link ,so it's not possible control other device(TV, PS3) with AV-receiver controller or with from TV remote controller can't control AV-receiver. $:-\$

DIsconnect Q5 (not turn-off, must be removed HDMI cable) all work:
- AV receiver control with CEC all device (TV, PS3 ...)
- TV controll AV receiver

patrickv7373 · « **Reply #1 on:** June 04, 2015, 05:45:47 PM »

looun · « **Reply #2 on:** June 04, 2015, 10:24:26 PM »

Do you have try with q5 , work?

target5 · « **Reply #3 on:** June 08, 2015, 07:47:29 PM »

I also have the problem with my q5 and my onkyo
When I use hdmi and box is on the control of the TV and amp is OK but turn of the q5 the controle is goon .

target5 · « **Reply #4 on:** June 12, 2015, 01:51:37 PM »

No help at all

looun · « **Reply #5 on:** June 14, 2015, 09:32:50 AM »

target5 · « **Reply #6 on:** June 14, 2015, 02:19:35 PM »

Where to get

looun · « **Reply #7 on:** June 14, 2015, 04:29:39 PM »

store online: ebay. amazon , aliexpress....

pcristi · « **Reply #8 on:** July 22, 2015, 06:12:53 PM »

Lindy HDMI CEC Less Female to Male Adapter solved this. Tested with HiMedia Q5 4K3D.

hazzad · « **Reply #9 on:** September 17, 2015, 10:38:01 AM »

I have only just purchased the Q10 and noticed since i got it the ARC(Audio Return Channel) feature of my Onkyo stopped working. After a lot of messing about it appears the issue above is effecting me. Problem is, even with the unit poweroff completely, the ARC does not work. The only way to re-enable the ARC feature is to disconnect the HDMI cable from the amp completely. Is this a firmware bug of a hardware issue? If a firmware issue, is it going to be addressed as it renders the unit somewhat useless for those who use an amplifier with ARC + auto power on.

looun · « **Reply #10 on:** September 17, 2015, 01:11:08 PM »

I have cut pin 13( CEC ) on HDMI cable, now CEC and ARC work.

5 minute 0$, I used a really thin paper clip to first jam the pin back

hazzad · « **Reply #11 on:** September 18, 2015, 08:43:05 AM »

Thanks for the reply but no that did not work either. Removed the pin you mentioned still with same issue. Really starting to annoy me now.

ppd78 · « **Reply #12 on:** October 10, 2015, 04:19:03 PM »

Quote from: pcristi on July 22, 2015, 06:12:53 PM

Lindy HDMI CEC Less Female to Male Adapter solved this. Tested with HiMedia Q5 4K3D.

I confirm the Lindy adapter works: problem solved! thx!

lukappaseidue · « **Reply #13 on:** November 26, 2015, 05:17:03 PM »

I have the same issue with Q10, yamaha AMPLI, PANASONIC PLASMA TV.
With Q10 linked to YAMAHA AMPLY, ARC is not mor working. I have to remove the HDMI CABLE from q10 to recover the function.
Any fix?

looun · « **Reply #14 on:** November 27, 2015, 01:40:40 PM »

again buy a HDMI CEC Less Adapter or cut PIN number 13

Author Topic: Q5 and HDMI-CEC problem (Read 39492 times)

looun

Q5 and HDMI-CEC problem

patrickv7373

Re: Q5 and HDMI-CEC problem

looun

Re: Q5 and HDMI-CEC problem

target5

Re: Q5 and HDMI-CEC problem

target5

Re: Q5 and HDMI-CEC problem

looun

Re: Q5 and HDMI-CEC problem

target5

Re: Q5 and HDMI-CEC problem

looun

Re: Q5 and HDMI-CEC problem

pcristi

Re: Q5 and HDMI-CEC problem

hazzad

Re: Q5 and HDMI-CEC problem

looun

Re: Q5 and HDMI-CEC problem

hazzad

Re: Q5 and HDMI-CEC problem

ppd78

Re: Q5 and HDMI-CEC problem

lukappaseidue

Re: Q5 and HDMI-CEC problem

looun

Re: Q5 and HDMI-CEC problem