Q10 PRO FIRMWARE. 1.0.3-FUTEKO-EN. HMD-1.0.3 2016-05-23.124800

[vectorx]

I have HDMI auto adaption OFF. Res set to 2160p 60hz, HMDI set to 10 bit. It works well for 4K movies, plays them at 24p 4K and 60fps 4K for things like Kylie Kiss Me Once Live 4K rip.
All HDR demos I have work as well as via a USB hard drive on my LG 4K OLED.
I haven't tried any 1440p stuff on YouTube but all the 4K videos I tried work just like the 4K YouTube webos program built into the TV.
I have my HDR setting set at HDR10. I have to turn it to SDR to fiddle with imprex and custom picture settings.
Sony Camp def works in HDR looks stunning.

[vectorx]

I have HDMI deep colour enabled on both HDMI1 and 3 on my TV. 3 has the Q10 pro plugged in. 1 Panny UHD BD

[gesu]

OTA update?

[gbakay]

Firmware 1.0.3 seems to be giving me1 problem that I've noticed so far, if anyone can check the same on their Q10 Pro.

When a movie finishes either in KODI or the HiMedia player it starts to play the same movie over again. I've installed the firmware twice thinking maybe there was a glitch the first time. I don't see any settings to fix this problem. Is it a firmware problem or a setting that I don't know about.

Never had this problem with version 1.0.1 firmware.

Otherwise, I'm very happy with the firmware, it seemed to fix picture problems I've had before, now my movies display perfectly!

[salalee]

i'm not that upset with this update , when i realized the despite the fact that it switches back to HDR10 every time the box boots , it still retains the settings you used in SDR before you booted (i mean to say ; the PQ and Imprex engine settings you made in SDR will take effect on HDR10).... nice

[3DFreezeMe]

When having problems loading the new firmware from the USB drive, check if it is formatted as exFAT.
This will not work!

Try an USB stick with either NTFS or FAT32 formatting.

Oh, and my device does not have a 'restore' pinhole,, it it called 'upgrade'. Also, it is not located on the side of the Q10Pro but on the back of the device (next to the power connector.

[pcristi]

Check if help when movie playing press on remote control Menu/PlayMode/Order of Play .

Firmware 1.0.3 seems to be giving me1 problem that I've noticed so far, if anyone can check the same on their Q10 Pro.

When a movie finishes either in KODI or the HiMedia player it starts to play the same movie over again. I've installed the firmware twice thinking maybe there was a glitch the first time. I don't see any settings to fix this problem. Is it a firmware problem or a setting that I don't know about.

Never had this problem with version 1.0.1 firmware.

Otherwise, I'm very happy with the firmware, it seemed to fix picture problems I've had before, now my movies display perfectly!

[flydini]

1- Video Color Space & HDMI Deep Color: each time I selected YCbCr420 10 bit, exit and click again but it is switched to YCbCr420 8 bit. It can't stay at 10 bit. Previous fw didn't happen this.( My TV supports 10 bit at HDMI 3 which Q10 is connected with the original cable came in the box)
2- Either via Wifi or Ethernet, I can't change DNS 1 and DNS 2, they are passive, so I can't surf through blocked web sites in Turkey. Previous fw didn't happen this.

[vdevil]

Really still no Autoframeswitching below 1080p resolution? 

Himedia Sucks really ....

[flydini]

1- Video Color Space & HDMI Deep Color: each time I selected YCbCr420 10 bit, exit and click again but it is switched to YCbCr420 8 bit. It can't stay at 10 bit. Previous fw didn't happen this.( My TV supports 10 bit at HDMI 3 which Q10 is connected with the original cable came in the box)
2- Either via Wifi or Ethernet, I can't change DNS 1 and DNS 2, they are passive, so I can't surf through blocked web sites in Turkey. Previous fw didn't happen this.

1- Not from this path, but at the bottom there is "Advanced settings" and 10 bit can be selected there.SOLVED so far.

[magnifico]

[salalee]

oh gosh.... i just found out that the switching between HDR10 and SDR actually works after reboot (even the video color space and HDMI deep color) on my samsung js9500 , but in order to do that just change it via system's advance options and NOT the video output options...
olivierQC ,  senior members of futeko might have a different approach...
for me, the Q10 pro is one hell of an android box.... i've owned many amlogic and rockchip-based boxes , but (for me) nothing beats the Q10 pro , period. i even heard that the shield (which is superior for gaming) comes as a runner up to the Q10 pro (which is superior in video playback)...

[magnifico]

[gbakay]

Check if help when movie playing press on remote control Menu/PlayMode/Order of Play .

Firmware 1.0.3 seems to be giving me1 problem that I've noticed so far, if anyone can check the same on their Q10 Pro.

When a movie finishes either in KODI or the HiMedia player it starts to play the same movie over again. I've installed the firmware twice thinking maybe there was a glitch the first time. I don't see any settings to fix this problem. Is it a firmware problem or a setting that I don't know about.

Never had this problem with version 1.0.1 firmware.

Otherwise, I'm very happy with the firmware, it seemed to fix picture problems I've had before, now my movies display perfectly!

Thanks pcristi that helped! Problem solved

[salalee]

magnifico.... bro , you actually can ; when you're in HDR10 mode , go to video output settings and change it to SDR , then set up the HDR saturation from the imprex engine settings to your likings then go back to the video output settings and change the tv HDR mode to HDR10... you'll be on HDR10 with your HDR saturation level that you've chosen....
by the way , to change to whatever the TV HDR mode you like and keep such a mode even after rebooting, just go the system advanced options at the  very bottom of the android settings list , not the video output options which will not keep the changes you made to the tv HDR mode after rebooting.
thanks bro