Decoding audio Dolby TrueHD

[bvliviu]

You will get 2 channel PCM stereo from ISOs with any audio format (True-HD, DTS-HD, AC3, DTS etc).

This will be the best you'll do with True-HD and the Logitech Z 906.

The Q5/Q10 (and in fact all other Android boxes) cannot decode True-HD and output it as 5.1 DTS (you say the Logitech Z 906 can only decode 5.1 DTS).

Like I said,unfortunately doesn't work

[airsoft]

You mean in best case MKV with Dolby TrueHD will be decoded to stereo PCM in future software release?
Seems a hardware(chipset) limitation
Better this than nothing.

Regards

You will get 2 channel PCM stereo from ISOs with any audio format (True-HD, DTS-HD, AC3, DTS etc).

This will be the best you'll do with True-HD and the Logitech Z 906.

The Q5/Q10 (and in fact all other Android boxes) cannot decode True-HD and output it as 5.1 DTS (you say the Logitech Z 906 can only decode 5.1 DTS).

[futeko.com]

You mean in best case MKV with Dolby TrueHD will be decoded to stereo PCM in future software release?
Seems a hardware(chipset) limitation
Better this than nothing.

Regards

I don't mean that. I don't honestly know what best case is. Himedia have been made aware of the problem and are looking at what they can do.

[airsoft]

I don't mean that. I don't honestly know what best case is. Himedia have been made aware of the problem and are looking at what they can do.

According my opinion and my wish of course, it should be implemented like this:
1) RAW7.1 => trying to send to a receiver 7.1 PCM
2) RAW5.1 => trying to send to a receiver 5.1 PCM (probably if source is 7.1 surround back and side should be mixed)
3) Auto => the principle of auto negotiation (if receiver supports 7.1 should send 7.1 PCM otherwise should send 5.1 PCM)
4) STEREO => should send stereo PCM
or maybe STEREO MODE should be at option "Auto" i.e. there is no auto negotiation.

But like I wrote at top of reply it is only my opinion.

Regards