OFFICIAL Q10 PRO FIRMWARE. FUTEKO. HMD-2.0.8 2018-04-03

[newbi14]

USB stick MUST be formated with FAT32,  NOT ntfs or other. .....

[Godmax]

Still no subtitle off option, right? And no 10 seconds skipping during playback, why not? Is it hard to implement?

[Sent]

Why no more OTA updates?
Very annoying to have to reinstall and set everything up with every updates!

You can install via settings menu without losing anything (backup first just in case)
"
Firmware upgrade from Settings Menu (user data will not be cleared)
1.Download a new firmware and place the firmware onto the ROOT directory of a USB drive.

2.Plug the USB drive into an empty USB HOST on the SMART TV BOX.

3.Go to Settings?System?System upgrade to select/click the letter of the USB drive.

4.The SMART TV BOX will begin upgrading the firmware from the USB drive.

5. Wait for the SMART TV BOX to complete the upgrade. Please be patient as it may take around 5 minutes to complete.

6. When finished, The SMART TV BOX will auto reboot.
"

Does it work without loosing all data? For sure?
I would be nice

[DMD]

From what I read in the forum it is always advisable to perform the update with the "clip" method and reset button to then restore the Kodi bakup.
What I do not understand, why is the method of updating via OTA and when is it advisable to use it? 

Thank you

[cheng666]

Download: http://www.mediafire.com/file/zaaxlutyegbulii/Q10%20PRO%20FIRMWARE.%20ANDROID%207%20v2.0.4+%20TO%20v2.0.8.%20FUTEKO.%20HMD-2.0.8%202018-04-03.zip


I already downloaded above link and I got ZIP file and when I extract this file I'm not found update.zip file. Pls help to check and advise how to solve this issue.

I try to change file name to update instead but it's not work.

Content of Q10 PRO FIRMWARE. ANDROID 7 v2.0.4+ TO v2.0.8. FUTEKO. HMD-2.0.8 2018-04-03.zip:



Extract the update.zip file to a USB flash drive.

I try ti install new firmware but I can't. pls help me to solve this matter. I don't know what happen.

l try all method to solve. pls see attched.

Futeko, I try to update firmware  following your method but I have the problem. Pls see attached photo as I mention.

I need your help to advise what wrong and how to solve this issue.   

I try to factory reset but not work. I found the same screen.
I try to upgrade by press UPGRADE button but found same screen.

[hjkaye]

Have a minor problem, really not serious, with both the Q5 and Q10, firmware 206 and up, possiibly earlier. when using an HDMI switcher, both a Yamaha high end AV receiver, and a basic switch, this always occurs when you switch to another hdmi source:

each time you switch away and back, another new tab. I discovered this when I was testing my setup, and switched back and forth several times without really looking at the screen contents. I ended up with about eight tabs open.

 Very consistent, happens all the time.

ANY response to this problem report?