OFFICIAL Q10 PRO FIRMWARE. FUTEKO. HMD-2.0.8 2018-04-03

[afss]

Again, if anybody with 2.0.7 or 2.0.8 could please test the enclosed .srt file and see if they get all subtitles to show every second (after 5 seconds), or if there are subtitle skips. I am running 2.0.6 and it works perfectly.

Just rename the enclosed file to the same name as any other video file (larger than 10seconds in duration), and the subtitle should show. I am looking for confirmation that the failure can be observed (some subtitles get skipped) so that I can pass it on to Himedia.

Thanks in advance !

[Phil181]

Still no way to deactivate the subtitles for good without playing around with the language settings?

That would interest me too.
It's annoying as hell having to navigate through menus every single time a new movie is being watched.

Switching off sub-titles would be handy (as long as forced sub-titles then appeared).  However, it is not a big deal to use the dedicated button on the remote to switch sub-titles off on playback.  I often remux files to remove unwanted sub-titles and audio tracks as this is a relatively fast process with no transcoding required.

[mihailuican]

I may be wrong, but i first time observed the subtitle lines skip in 2.0.7. It seemed to me that it was present every now and then, not extremely bothersome.
The issue affected the liens with 1ms millisecond) pause between lines.
The issue clearly appeared to me as accentuated in 2.0.8, where MORE than every other line was missing.
COMING BACK TO 206, it seems to me that the issue is NOT present at all, all subtitle lines aer showing.
I will not upgrade anymore.
Just my 2 cents

[afss]

I may be wrong, but i first time observed the subtitle lines skip in 2.0.7. It seemed to me that it was present every now and then, not extremely bothersome.
The issue affected the liens with 1ms millisecond) pause between lines.
The issue clearly appeared to me as accentuated in 2.0.8, where MORE than every other line was missing.
COMING BACK TO 206, it seems to me that the issue is NOT present at all, all subtitle lines aer showing.
I will not upgrade anymore.
Just my 2 cents

Since I got no responses I actually upgraded to 2.0.8 for testing purposes and was able to reproduce the issue only if the subtitles overlap. I have created a new file that I sent to Himedia this morning (enclose if anybody else wants to test).

I then rolled back to 2.0.6 and indeed the problem does not manifest on that version. I am too staying on 2.0.6 until there is a permanent fix for now.

regards.

[Kirek50]

I then rolled back to 2.0.6 and indeed the problem does not manifest on that version. I am too staying on 2.0.6 until there is a permanent fix for now.

regards.

Version 2.06 is the last one that works properly when it comes to displaying subtitles.

[cheng666]

Download: http://www.mediafire.com/file/zaaxlutyegbulii/Q10%20PRO%20FIRMWARE.%20ANDROID%207%20v2.0.4+%20TO%20v2.0.8.%20FUTEKO.%20HMD-2.0.8%202018-04-03.zip


I already downloaded above link and I got ZIP file and when I extract this file I'm not found update.zip file. Pls help to check and advise how to solve this issue.

I try to change file name to update instead but it's not work.

[futeko.com]

Download: http://www.mediafire.com/file/zaaxlutyegbulii/Q10%20PRO%20FIRMWARE.%20ANDROID%207%20v2.0.4+%20TO%20v2.0.8.%20FUTEKO.%20HMD-2.0.8%202018-04-03.zip


I already downloaded above link and I got ZIP file and when I extract this file I'm not found update.zip file. Pls help to check and advise how to solve this issue.

I try to change file name to update instead but it's not work.

Content of Q10 PRO FIRMWARE. ANDROID 7 v2.0.4+ TO v2.0.8. FUTEKO. HMD-2.0.8 2018-04-03.zip:



Extract the update.zip file to a USB flash drive.

[nandish]

I installed CFW 2.08 yesterday (the paper clip method). I have enough! What newer software - the more errors and problems (stop the launcher, problems with xvid video, long start of the player, poor response to remote control) I went back to the version CFW 2.06 using the paperclip method, and I think it will stay like that. that it's a finished player, it's all the time any alpha or beta software. Time to sell it, and look for something better Thank you for the possibility of downloading older versions of the firmware. [google translator]

[pcristi]

I installed CFW 2.08 yesterday (the paper clip method). I have enough! What newer software - the more errors and problems (stop the launcher, problems with xvid video, long start of the player, poor response to remote control)

Thanks for feedback sound like didn't have patient to wait for finishing install of all apps in first boot then player be come proper responsive, this can take up to 15 minutes after HiMedia launcher is display in first boot. Latter start will be run in normal time up to 30 seconds.

Xvid video problems is a know bug on OFW v2.0.7/2.0.8 and are not intend try to avoid/fix it in CFW.

[nandish]

I installed CFW 2.08 yesterday (the paper clip method). I have enough! What newer software - the more errors and problems (stop the launcher, problems with xvid video, long start of the player, poor response to remote control)

Thanks for feedback sound like didn't have patient to wait for finishing install of all apps in first boot then player be come proper responsive, this can take up to 15 minutes after HiMedia launcher is display in first boot. Latter start will be run in normal time up to 30 seconds.

Xvid video problems is a know bug on OFW v2.0.7/2.0.8 and are not intend try to avoid/fix it in CFW.

It's not like you write. I know that the first time you need to give the player time to install the application and organize the system. After two hours and a few starts, it still jams, starts movies too long. Something is wrong. In addition, the message "Launcher 3D has stopped working" pops up. I did not install anything, I did not even sign in to Google. When attempting to remotely switch off, the clock on the display hangs up, and the background on the tv screen turns gray. I tried for several hours, no improvement. Staying with version 2.06, this version somehow works and after 15 minutes from the first start, everything is correct. Sadly, Himedia does not respect its customers.

How does the alternative firmware work, (unofficial_ATV [v2.3]) - HMD-2.0.6 2017-10-25.164125), is it worth installing?

[tlchuan]

Again, if anybody with 2.0.7 or 2.0.8 could please test the enclosed .srt file and see if they get all subtitles to show every second (after 5 seconds), or if there are subtitle skips. I am running 2.0.6 and it works perfectly.

Just rename the enclosed file to the same name as any other video file (larger than 10seconds in duration), and the subtitle should show. I am looking for confirmation that the failure can be observed (some subtitles get skipped) so that I can pass it on to Himedia.

Thanks in advance !

subtitle work fine for me, chinese srt or ass work fine

[tlchuan]

bluray menu is not in the update, need to manually install

[interested]

I don't know about other types of subtitles, but srt ones definitely skips lines , on and off.

[cheng666]

Download: http://www.mediafire.com/file/zaaxlutyegbulii/Q10%20PRO%20FIRMWARE.%20ANDROID%207%20v2.0.4+%20TO%20v2.0.8.%20FUTEKO.%20HMD-2.0.8%202018-04-03.zip


I already downloaded above link and I got ZIP file and when I extract this file I'm not found update.zip file. Pls help to check and advise how to solve this issue.

I try to change file name to update instead but it's not work.

Content of Q10 PRO FIRMWARE. ANDROID 7 v2.0.4+ TO v2.0.8. FUTEKO. HMD-2.0.8 2018-04-03.zip:



Extract the update.zip file to a USB flash drive.

I try ti install new firmware but I can't. pls help me to solve this matter. I don't know what happen.

l try all method to solve. pls see attched.

[DMD]

I tried to decompress the file downloaded with both WinRAR and 7-zip, and both got the update.zip and readme.txt files
The USB stick must contain only the file update.zip