Mkv+ flac 7.1

[onyxx1995]

I just got q5 pro...its perfect.one problem.i have movie 2160p mkv+7.1 flac.is it possible to get 5.1 on digital out.i only have stereo. DD and DTS works fine.thanks!

[Phil181]

Have you updated the firmware to the latest and changed audio Settings output to RAW, RAW and RAW7.1?

[Transit266]

Unfortunately, Flac 7.1 only been downmix to stereo. I did try to RAW 7.1 or LPCM but the results is the same.

[onyxx1995]

I tried everything,only stereo out....new fw,raw,lpcm...its not so big deal to me,i only have one movie with flac 7.1...just asking is it possible. Thanks!

[Transit266]

you can refer to this checked list for audio supporting by Hdmkv :
http://forum.kodi.tv/showthread.php?tid=265888

[Phil181]

I tried everything,only stereo out....new fw,raw,lpcm...its not so big deal to me,i only have one movie with flac 7.1...just asking is it possible. Thanks!

Not seen any movies encoded in FLAC 7.1 to test but I can confirm FLAC 5.1 works perfectly and also AAC 5.1, LPCM 7.1, Dolby TrueHD 7.1 and DTS-HD MA 7.1 are all passed through correctly to my Yamaha Aventage RX-A710 (with the newer firmware).

[onyxx1995]

I see it for the first time,too...i know that all sounds are working OK,but,flac 7.1 ,does not...this is movie info...sorry for english

Format : Matroska
Format version : Version 4 / Version 2
File size : 41.7 GiB
Duration : 2h 36mn
Overall bit rate mode : Variable
Overall bit rate : 38.2 Mbps
Encoded date : UTC 2016-06-06 17:30:01
Writing application : mkvmerge v9.0.1 ('Obstacles') 64bit
Writing library : libebml v1.3.3 + libmatroska v1.4.4

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L5.1
Format settings, CABAC : Yes
Format settings, ReFrames : 7 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 2h 36mn
Width : 3 840 pixels
Height : 1 606 pixels
Display aspect ratio : 2.40:1
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Writing library : x264 core 148 r2692kMod 64f4e24
Encoding settings : cabac=1 / ref=7 / deblock=1:-3:-3 / analyse=0x3:0x133 / me=umh / subme=10 / psy=1 / fade_compensate=0.00 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=48 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=12 / lookahead_threads=2 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / fgo=0 / bframes=8 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc=crf / mbtree=0 / crf=17.0000 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.30 / pb_ratio=1.20 / aq=3:0.75
Language : English
Default : Yes
Forced : No

Audio
ID : 2
Format : FLAC
Format/Info : Free Lossless Audio Codec
Codec ID : A_FLAC
Duration : 2h 36mn
Bit rate mode : Variable
Channel(s) : 8 channels
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Writing library : libFLAC 1.2.1 (UTC 2007-09-17)
Language : English
Default : Yes
Forced : No

[qqq1971]

but I can confirm FLAC 5.1 works perfectly and also AAC 5.1, LPCM 7.1, Dolby TrueHD 7.1 and DTS-HD MA 7.1 are all passed through correctly (with the newer firmware).

I can't confirm that AAC 5.1, LPCM 5.1, LPCM 2.0 (some of sources) passed through with latest or old firmware. So please be accurate and add "for me".

[daredevil]

AAC 5.1does not work with Q10 pro. It always output as 2 channel stereo only, with the old and as well as the new firmware. I am using Yamaha RX-V673. But with same AV receiver and MED600X3D, the output works with AAC5.1 input as PCM 5.1.
Himedia should look into this bug ASAP.

[Maya93]

I have the same problem. Only 2 channels output with Aac 5.1 with my onkyo RZ900 receiver

[captinmike]

Same problem with Denon AVR X2200W

[Phil181]

So please be accurate and add "for me".

I have edited my post to confirm they pass-through on my Yamaha AVR. 
This was fixed (for me) in the firmware update.  It is evident others are still having issues so not all AVR's are treating the bitstream from the Q10 Pro the same way.

[qqq1971]

This was fixed (for me) in the firmware update.  It is evident others are still having issues so not all AVR's are treating the bitstream from the Q10 Pro the same way.

I'm feeling you are touched (in negative sense). And I have to say "nothing personal". In fact I'm really thankful to you for your "ready to help" position and information about your Yamaha AVR.

I have to explain my position too. As I've noticed before I have another players (hardware BD player and popcorn c200) worked with my AVR. I mean file that does not played on Q10 Pro played on the same AVR fine with another player. There are some people that have troubles too. As you have noticed Q10 Pro wasn't worked with your AVR until new firmware.

So I can't agree with formulation that Q10 Pro can passthrough and my AVR is incompatible with Q10 Pro. It's Q10 Pro can't work properly with some AVR including my. My point is - I just want firmware that works with my AVR (Pioneer VSX-920).

[pcristi]

"For me" AAC 5.1 is passthrough MultiCh 5.1

I have the same problem. Only 2 channels output with Aac 5.1 with my onkyo RZ900 receiver

Same problem with Denon AVR X2200W

[pcristi]

@onyxx1995,@Phil181...
Add a 2nd audio track, and let as to know if FLAC 7.1 is passthrough Multi Ch 7.1

I see it for the first time,too...i know that all sounds are working OK,but,flac 7.1 ,does not...this is movie info...sorry for english