I have a new 4k HDR capable Panasonic TV, it handles HLG, Dolby Vision, HDR and is very good, so far, but I am having problems with my Q10 Pro. If I select an HDR video (H264 or H265) most of the time I get sound but no picture, I can cure this by quickly unlugging the HDMI cable then plugging back in after which the video plays. Another post looks like they have the same problem and pcristi says to uncheck HDCP in settings, will that be an answer?
Is HDMI auto adaption to be on or off, and why can't I select YCbCr444 10bit, it says not supported and reverts to YCbCr424 10 bit.
I also have a problem with CEC when the Q10 is plugged in via HDMI, to either my AVR or direct to the TV, with or without power, and I cannot get the TV to switch from freeview to the Sky box. If the Q10 is not plugged in then all OK. Is this the pin 13 problem on HDMI?
So many problems I am considering a change from Himedia, but what should I consider? Budget is a problem, but I need and internal drivebay (6TB 3.5") and ability to handle all HDR formats, as many sound types as possible, any suggestions?
Thanks again to the forum for any help
Q10Pro, CFW 2.1.7, Android 7
PS I had just installed PlutoTV and another similar, could this be it?
Topic: Q10pro problem with HDR (Read 1428 times)
