OFFICIAL Q10 PRO FIRMWARE. FUTEKO. HMD-2.0.7 2018-01-12

[futeko.com]

OFFICIAL Q10 PRO FIRMWARE. FUTEKO. HMD-2.0.7 2018-01-12

Internal build number: HMD-2.0.7 2018-01-12.113104

** THIS FIRMWARE IS FOR Q10 PRO RUNNING ANDROID 7 FIRMWARE 2.0.4 OR LATER.

** THIS FIRMWARE IS FOR EUROPEAN HIMEDIA Q10 PRO ONLY!

** DO NOT INSTALL ON CHINESE HARDWARE VERSION Q10 PRO OR OR PREVIOUS GENERATION Q10 4K3D.

** YOU WILL LOSE ALL USER INSTALLED APPS AND SETTINGS! PLEASE BACK UP BEFORE UPDATING (Kodi backup: http://kodi.wiki/view/backup).

Changelog

New:
1. Support Blu-ray ASS subtitle, and regain subtitles moving up/down function
2. Movie Bar support Child Lock function. Only the password is inserted from the left column, the hidden video resources available.
3. Adding add/delete file function for Movie Bar.
4. Adding release time category for Movie Bar.
5. Adding error report function for Movie Bar , and the error will be taken care of within 48 hours. And then the user could delete the data from setting and rescan to check for fixed data.
6. Movie Bar and shortcut of Media Center has been synchronized.
7. Adding 'default subtitle switch' option to subtitle setting menu. When select 'default turn off subtitle' option, video will default close the subtitle, manually switch is available. Otherwise, vice versa.

Fixed bugs:
1. Time zone setting not save issue fixed.
2. The main playlist algorithm of the lite blue ray navigation optimized.
3. Got rid of 4096*2160 resolution.
4. When the video is exited from the breaking point, it will start all over again.
5. Kodi unable to play online video issue is fixed.

Download & Instructions

THIS FIRMWARE CAN ONLY BE INSTALLED ON A EUROPEAN Q10 PRO RUNNING ANDROID 7 FIRMWARE 2.0.4 OR LATER!

Information on how to update from earlier firmware to Q10 Pro version 2.0.4 is here.

Your current firmware version can be found at Settings - About - Device Info - Build number.

Download: http://www.mediafire.com/file/y1qhes2nd0nc9xz/Q10_PRO_FIRMWARE._ANDROID_7_v2.0.4%2B_TO_v2.0.7._FUTEKO._HMD-2.0.7_2018-01-12.zip

1. Extract update.zip (using an unzip program like 7zip, winzip etc) from the downloaded zip archive to the root of a FAT32 formatted USB pen drive. (the USB pen drive should contain a single file called 'update.zip'). Note, there is no need to rename anything!
2. Insert the USB pen drive into any USB port of Q10 Pro.
3. With Q10 Pro turned off, use a paper clip or pen to press and hold the the pinhole UPGRADE button on the back of Q10 Pro (next to the power port).
4. While keeping the UPGRADE button pressed, turn on the Q10 Pro.
5. Q10 Pro will showthe Android 7 coloured circle logo.
6. When you see the circle logo you can release the restore button.
7. A progress bar will indicate update progress. Do not turn box off or use the box/remote during update!
8. When update is complete the box will automatically reboot.
9. First boot will take 3-5 minutes. The box will reboot into new firmware. Allow boot to complete.

[HereIsTom]

Too bad that there are no more OTA updates, now you have to reset everything again 

[DMD]

Good morning.
Someone who has already installed it, can kindly check if the bug of the aspect ratio pal 720x576 has been corrected.
http://www.futeko.com/newforum/index.php?topic=2576.0

Thank you

[pempek40]

It still needs the Blue ray patch .

[maelor]

It still needs the Blue ray patch .

Futeko, can you confirm this?

Also, does in need the Auto framerate switching patch???

[Mount81]

And can you confirm or confute that is the RCA analogue output audio lip-sync issue solved?

Thank you!

[futeko.com]

And can you confirm or confute that is the audio lip-sync issue solved?

Thank you!

In common with almost all Q10 Pro users, I don't have RCA audio outputs set up for regular Q10 Pro use. The 'RCA audio output lip-sync' bug has only ever been reported by you. You are the person with most knowledge of how it manifests itself. I kindly request that you test the new firmware to see if it is resolved.

[AJK77]

@ Mount81 and futeko.com

We use a analog wireless headphone on the RCA,
and the amp is connected on the digital RCA (Coax)
and yes there is a delay, i think about 100 ms.

normally no issue for us, I look tv my wife listens to music,
so i didn't report it....

[guyrab]

nfs mount bug (new to this firmware)
I had an nfs mount directory on my computer it was always mounted on the Q10 and now when I go to the mount it cannot show it....

I know what the problem is = I have a space character in the path of the mounted directory (always had it no change there), the Q10 now shows up to the space so
my mounted directory is  "/Volumes/Data HDD/Users/guyr/Downloads" (note the space between "data" and "HDD"
the Q10 shows "Volumes/Data" (until the space) and therefor cannot mount it....

help will be appreciated (I cannot easily change the name as it's a hard rive)

[breaker]

Too bad that there are no more OTA updates, now you have to reset everything again 

no need to reset everything you can also update by choose------ local update------ choose there your sd card or usb stick and update the firmware
but a  total reset schould be the best

[carl]

And can you confirm or confute that is the audio lip-sync issue solved?

Thank you!

In common with almost all Q10 Pro users, I don't have RCA audio outputs set up for regular Q10 Pro use. The 'RCA audio output lip-sync' bug has only ever been reported by you. You are the person with most knowledge of how it manifests itself. I kindly request that you test the new firmware to see if it is resolved.

Hi futeko, sorry to bother.

Can you confirm if any of these bugs are solved in the new version? Or any chance you report them to Himedia if not? I think i have this issues with Q10 when using the HiMediaVideoPlayer Wrapper, since i bought the box.

1) Downloading subtitles with the Wrapper doesn't consider kodi addons or subtitle configuration in Kodi, so is very difficult to find proper subtitles for movies, as it list a lot of languages i don't need (my main language is Spanish).

2) Subtitle time adjust delay function is too short, only allows "+/-" 10 seconds, it would be useful to allow more (like default Kodi player). Sometimes i have not very known movies that doesn't have a lot of subtitles, so i can't use the wrapper, i have to turn to the default player.

3) Wrapper fails to play movies when the file name of the movie has symbols like number sign (#) or ampersand (&). It shows the error "Video Problem". This is specially a problem with TV series.

Thanks in advance

[ErikS]

Still no HD audio pass through with Kodi 17.x. I see the FAQ has been edited to no longer indicate this will be fixed in a future firmware. Does anyone know if this is still in the works, or has  Himeda given up on this?

[honto]

3. Got rid of 4096*2160 resolution.

How about bright flashes that appear during playback?
To me, the only way to get rid of it is by switching the resolution to 4096*2160.
(Turning off Dynamic Contrast doesn't fix it at all)

=========================================================================================
Damn it. I updated it, and the annoying bright flashes still there
Now that the 4096*2160 resolution is ridden, there's nothing left I can do to make it disappear.

How to return the update to the exact previous version (2.0.6)?
Do I have to reset factory and start from the beginning?

[mihailuican]

And can you confirm or confute that is the audio lip-sync issue solved?

Thank you!

In common with almost all Q10 Pro users, I don't have RCA audio outputs set up for regular Q10 Pro use. The 'RCA audio output lip-sync' bug has only ever been reported by you. You are the person with most knowledge of how it manifests itself. I kindly request that you test the new firmware to see if it is resolved.

Hello,
this is not entirely true.
I also concur with Mount81. lip-sync through RCA is a big problem for the ones who send their sound in audio lines through RCA...
Cheers.

[stl]

3. Got rid of 4096*2160 resolution.

How about bright flashes that appear during playback?
To me, the only way to get rid of it is by switching the resolution to 4096*2160.
(Turning off Dynamic Contrast doesn't work at all)

Disable imprex engine