∙
UK BASED ∙ UK STOCK ∙ ESTABLISHED 2010
2 YEAR WARRANTY ∙ FAST DELIVERY
EXPERT TECHNICAL SUPPORT
28-APR ARYLIC LP-10 CLEARANCE SALE!   09-FEB UGOOS AM6B+ BACK IN STOCK   30-JAN ZIDOO 8K FIRMWARE UPDATE 1.3.05   5-JAN ARYLIC LP10 ADDS QOBUZ CONNECT  
This forum was closed in October 2025 in response to sustained DDOS type attacks. It has been left up read-only to allow access to support information and downloads. Thanks to all the users who contributed over the years.

Visit futeko.com for new Audio and Video Media Players!
« previous next »
Pages: [1]

Author Topic: HDD detecting problem.  (Read 4919 times)

Sebastiano

  • Newbie
  • *
  • Posts: 8
HDD detecting problem.
« on: April 23, 2017, 10:59:06 AM »
I am using internal hdd samsung 500gb when I turn on q10 hdd is not detecting but when i restart box everything is fine and hdd is mounted.  This situation happen every day. The sata conection is ok. Someone had this problem too?
Logged

alexvanniel

  • Newbie
  • *
  • Posts: 29
Re: HDD detecting problem.
« Reply #1 on: April 23, 2017, 11:11:57 AM »
What kind of drive is it? Basically what type and how many rpm is it? It could be that the drive is a bit slow spinning up. Have you tried waiting for a bit? I have had drives on my desktop PC that could take a few minutes before it could be seen by the PC because of the spin up time. The drive would not be available until the drive is fully spun up (is that even english ?? ;-) )
Logged

Sebastiano

  • Newbie
  • *
  • Posts: 8
Re: HDD detecting problem.
« Reply #2 on: April 23, 2017, 12:33:15 PM »
Hdd is 3.5'' type hd502hi. 5400 rpm. Maybe its too slow? thank you for advice. Sorry for my english.
Logged

Sebastiano

  • Newbie
  • *
  • Posts: 8
Re: HDD detecting problem.
« Reply #3 on: April 23, 2017, 01:00:03 PM »
Now i think it is something else. When I stop plyaing anything from the hdd. Hdd stop spining at all and disappear. I can't see the disc in FileManager until I reset the box....😕
Logged

alexvanniel

  • Newbie
  • *
  • Posts: 29
Re: HDD detecting problem.
« Reply #4 on: April 23, 2017, 01:13:12 PM »
It could be a faulty drive. If you are able to test it in a desktop computer you could run some S.M.A.R.T. diagnostic tools to see if it is the edge. I myself have a 7200rpm Seagate drive installed and haven't encountered this type of behaviour before. Not with the Q10 pro anyway.
Logged

Sebastiano

  • Newbie
  • *
  • Posts: 8
Re: HDD detecting problem.
« Reply #5 on: April 23, 2017, 01:23:13 PM »
Ok I will try. Thanks a lot.
Logged

Phil181

  • Senior Member
  • ***
  • Posts: 388
Re: HDD detecting problem.
« Reply #6 on: April 23, 2017, 03:49:07 PM »
Your Samsung HDD appears to be an older "green"/ "eco" drive with slow spin up introduced in 2009.
It could just take some time to get going or it could be a faulty drive.  Try some testing software in a PC as suggested. 
If you have another drive, see how it goes instead?
Logged

Nice Monkey

  • Senior Member
  • ***
  • Posts: 1140
  • Loves classic movies
Re: HDD detecting problem.
« Reply #7 on: April 23, 2017, 05:25:41 PM »
Apart from Native 4Kn (4K physical sector drives) all HDD's new, old, slow, fast, small and big should work just fine provided they are formatted correctly.
http://www.futeko.com/newforum/index.php?topic=576.0

That Samsung indeed looks to be defect as disappearing is absolutely not normal unless a faulty cable is used.

Currently using a 10-slot HDD Icy Box Docking Station which also works fine with a whopping 10x HDD connected on a single USB3 port.
« Last Edit: April 23, 2017, 05:34:42 PM by Nice Monkey »
Logged

Sebastiano

  • Newbie
  • *
  • Posts: 8
Re: HDD detecting problem.
« Reply #8 on: April 23, 2017, 05:28:02 PM »
I have got only this drive so I will try some software on laptop. Thank you. I think that I should buy a new one 😊 thanks!
Logged
Pages: [1]
« previous next »
 

DELIVERY ∙ PAYMENT ∙ WARRANTY+RETURNS ∙ INTERNATIONAL TAX ∙ ABOUT ∙ PRIVACY ∙ NEWS ∙ CONTACT
© SDHDIGITAL LTD 2026
SITEMAP