Unofficial Remote Patch (add STOP button and other)

[DMD]

Good evening.
I followed the instructions, inserted the IP address, the texts become
green, I select model 2 and after the window closes automatically,
restart HiMedia but I do not get any key mapping.
Where am I wrong?

Thank you
(O.S. Android 5.1 and FW 1.1)

[stl]

Good evening.
I followed the instructions, inserted the IP address, the texts become
green, I select model 2 and after the window closes automatically,
restart HiMedia but I do not get any key mapping.
Where am I wrong?

Thank you
(O.S. Android 5.1 and FW 1.1)

Does the box restarts itself? Try doing the procedure twice, if the box doesn't restart by itself the patch wasn't sucessfull

[DMD]

I did the procedure 2 times,
the box does not restart then I turned off and on again, the keys are not mapped.

[stl]

I did the procedure 2 times,
the box does not restart then I turned off and on again, the keys are not mapped.

Repeat the procedure twice or more WITHOUT restarting the box between tries. You'll see the box restart on its own if the patch was successfully installed

[DMD]

Thanks for the information.
After four attempts, I finally got the reboot message.



Now the keys are mapped.

[dorol]

After install, device failed to boot.

[futeko.com]

After install, device failed to boot.

i.e. bricked? What state is the box in exactly?

The script works with 2.0.4/2.0.5 so that shouldn't happen.

As a last resort you should be able to reinstall firmware.

[dorol]

After install, device failed to boot.

i.e. bricked? What state is the box in exactly?

The script works with 2.0.4/2.0.5 so that shouldn't happen.

As a last resort you should be able to reinstall firmware.

Not bricked, just no boot.
I was on 2.0.4 custom when installed the script.
Now i have 2.0.5 custom but  im too scared to use the script again after device failed to boot.

[caseyjones]

"Another brick in the wall." 
Anyone come up with a full patch for all of the changes mentioned in this thread?

There is a v0.4 on that website (in German), but you have to be registered to download it;
android-mediaplayer.de/index.php/Attachment/5696-Key-map-0-4-zip/

[Phil181]

This patch has worked well through many firmware updates and still works fine with the latest 2.0.6
It is my only re-install patch these days as I do like having a dedicated stop button.

[caseyjones]

Which version did you use?

Has anyone d/l'ed v04 from the German site?

[Phil181]

I have found with firmware 2.0.8 that Option 2 no longer works 
I tried a few times without success (and have been using the same patch for many firmware releases).

The better news is that option 1 still works so at least my "0" STOP key works again 
 

[stl]

I have found with firmware 2.0.8 that Option 2 no longer works 
I tried a few times without success (and have been using the same patch for many firmware releases).

The better news is that option 1 still works so at least my "0" STOP key works again 
 

Those are awful news, for me this patch with option 2 is essential  

[jcp2]

It took multiple tries, but option #2 worked for me on both my machines (Q10 pro) CFW 2.0.8

[mediaq10]

I have found with firmware 2.0.8 that Option 2 no longer works 
I tried a few times without success (and have been using the same patch for many firmware releases).

The better news is that option 1 still works so at least my "0" STOP key works again 
 

it does not work for me either. on 2.1.0
i have the key map 0.4 from german site, but I have not tried it yet.