UK BASED ∙ UK STOCK ∙ ESTABLISHED 2010
2 YEAR WARRANTY ∙ FAST DELIVERY
EXPERT TECHNICAL SUPPORT
09-FEB UGOOS AM6B+ BACK IN STOCK   30-JAN ZIDOO 8K FIRMWARE UPDATE 1.3.05   5-JAN ARYLIC LP10 ADDS QOBUZ CONNECT  
This forum was closed in October 2025 in response to sustained DDOS type attacks. It has been left up read-only to allow access to support information and downloads. Thanks to all the users who contributed over the years.

Visit futeko.com for new Audio and Video Media Players!
« previous next »
Pages: 1 2 3 [4] 5 6 ... 11

Author Topic: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824  (Read 146858 times)

Linuxx

  • Full Member
  • **
  • Posts: 57
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #45 on: August 18, 2016, 03:25:03 PM »
I mean "vibration" as video sample that I uploaded some days ago if you remember. Tonight I try to make another video hoping to capture the details.
Futeko one question...24hz mode is better let it active or disabled?
« Last Edit: August 18, 2016, 03:27:43 PM by Linuxx »
Logged

futeko.com

  • Administrator
  • Senior Member
  • *****
  • Posts: 4657
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #46 on: August 18, 2016, 03:36:26 PM »
Quote from: Linuxx on August 18, 2016, 03:25:03 PM
I mean "vibration" as video sample that I uploaded some days ago if you remember. Tonight I try to make another video hoping to capture the details.
Futeko one question...24hz mode is better let it active or disabled?

The judder at 34 seconds in that video is the 23.976fps output at 24Hz problem that is fixed in 1.0.7.

Presuming your TV can cope with 23.976Hz (and nearly all recent TVs can) then 24p mode (Settings - Playback - 24p) should be turned on. Without it Q5/Q10 Pro will output at whatever system refresh is set to (50Hz/60Hz).
« Last Edit: August 18, 2016, 03:38:02 PM by futeko.com »
Logged

Phantom

  • Newbie
  • *
  • Posts: 9
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #47 on: August 18, 2016, 03:52:22 PM »
Sorry guys, but should we use the Auto Frame Rate patch with FW 1.0.7, or this issue is already fixed and the patch is no longer applicable?
Logged

Linuxx

  • Full Member
  • **
  • Posts: 57
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #48 on: August 18, 2016, 05:06:41 PM »
Quote from: futeko.com on August 18, 2016, 03:36:26 PM
Quote from: Linuxx on August 18, 2016, 03:25:03 PM
I mean "vibration" as video sample that I uploaded some days ago if you remember. Tonight I try to make another video hoping to capture the details.
Futeko one question...24hz mode is better let it active or disabled?

The judder at 34 seconds in that video is the 23.976fps output at 24Hz problem that is fixed in 1.0.7.

Presuming your TV can cope with 23.976Hz (and nearly all recent TVs can) then 24p mode (Settings - Playback - 24p) should be turned on. Without it Q5/Q10 Pro will output at whatever system refresh is set to (50Hz/60Hz).

It's exactly that problem Futeko. I attach another video sample. See the "hat" beginning of video and the house at the end.

http://www.mediafire.com/download/3wawz649gdkop6l/VID_20160818_165546.mp4
Logged

ppoulos

  • Newbie
  • *
  • Posts: 24
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #49 on: August 18, 2016, 05:27:39 PM »
« Last Edit: August 18, 2016, 05:30:32 PM by ppoulos »
Logged

Nice Monkey

  • Senior Member
  • ***
  • Posts: 1140
  • Loves classic movies
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #50 on: August 18, 2016, 05:32:16 PM »
Quote from: Phantom on August 18, 2016, 03:52:22 PM
Sorry guys, but should we use the Auto Frame Rate patch with FW 1.0.7, or this issue is already fixed and the patch is no longer applicable?

It has been integrated into FW 1.0.7 and is no longer to be used. You activate the equivalent functionality by enabling 24P under options.
« Last Edit: August 18, 2016, 05:35:46 PM by Nice Monkey »
Logged

hdmkv

  • Senior Member
  • ***
  • Posts: 234
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #51 on: August 18, 2016, 06:50:16 PM »
Quote from: Linuxx on August 18, 2016, 05:06:41 PM
It's exactly that problem Futeko. I attach another video sample. See the "hat" beginning of video and the house at the end.

http://www.mediafire.com/download/3wawz649gdkop6l/VID_20160818_165546.mp4
Hi there, video you posted has a non-standard framerate of 29.789 ... so the "vibration" you mention would be there as the box is trying to sync to 29.970.
Logged

futeko.com

  • Administrator
  • Senior Member
  • *****
  • Posts: 4657
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #52 on: August 18, 2016, 07:56:14 PM »
Good spot.

The video needs re-encoding at a standard frame rate.

Logged

MikeDelta

  • Newbie
  • *
  • Posts: 32
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #53 on: August 18, 2016, 08:10:23 PM »
Logged

hdmkv

  • Senior Member
  • ***
  • Posts: 234
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #54 on: August 18, 2016, 08:48:10 PM »
Microstutters w/3D ISO's have been there since pre-release box.  2D ISO's @ 23.976 also don't have microstutters now, so can't be a container issue... hopefully HiMedia can fix 3D w/next f/w.
Logged

trykkertor

  • Newbie
  • *
  • Posts: 21
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #55 on: August 18, 2016, 08:59:19 PM »
Samba Service not working anymore.
Had the 1.0.6 firmware. Q10 showed up on all my windows pc.
Now with 1.0.7 I can not access files on the Q10.
It only shows as media device, and not as network storage.

What to do?
Logged

andys

  • Senior Member
  • ***
  • Posts: 128
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #56 on: August 18, 2016, 09:08:33 PM »
Quote from: trykkertor on August 18, 2016, 08:59:19 PM
Samba Service not working anymore.
Had the 1.0.6 firmware. Q10 showed up on all my windows pc.
Now with 1.0.7 I can not access files on the Q10.
It only shows as media device, and not as network storage.

What to do?

on my pc works
Logged

Linuxx

  • Full Member
  • **
  • Posts: 57
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #57 on: August 18, 2016, 11:37:01 PM »
Quote from: futeko.com on August 18, 2016, 07:56:14 PM
Good spot.

The video needs re-encoding at a standard frame rate.



No Futeko, that video is made with smartphone to capturing the tv to show the problem. It's not the real video. This is details of real video that is a .mkv bluray rip:

Codec ID: V_MPEG4/ISO/AVC
Risoluzione: 720 x 404
Frame aspect ratio: 180:101 = 1.782178 (~16:9)
Pixel aspect ratio: 1:1 = 1
Display aspect ratio: 180:101 = 1.782178 (~16:9)
Framerate: 25 fps

With Kodi and MX Player Pro there's no judder.
« Last Edit: August 19, 2016, 03:16:04 AM by Linuxx »
Logged

Nice Monkey

  • Senior Member
  • ***
  • Posts: 1140
  • Loves classic movies
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #58 on: August 19, 2016, 05:39:56 AM »
Quote from: trykkertor on August 18, 2016, 08:59:19 PM
Samba Service not working anymore.
Had the 1.0.6 firmware. Q10 showed up on all my windows pc.
Now with 1.0.7 I can not access files on the Q10.
It only shows as media device, and not as network storage.

What to do?

My setup has a working Samba Server as before. All my 5x drives connected do show up and are accessible via CIFS.
Logged

DancesWithChickens

  • Senior Member
  • ***
  • Posts: 140
Re: Q10 PRO FIRMWARE. 1.0.7-FUTEKO-EN. HMD-1.0.7 2016-08-10.190824
« Reply #59 on: August 19, 2016, 06:40:21 AM »
@andys:
Maybe it's just as simple as enabling samba again in settings.
I had to do it after the fw update since all previous settings were gone.
Works fine as before.
Logged
Pages: 1 2 3 [4] 5 6 ... 11
« previous next »
 

DELIVERY ∙ PAYMENT ∙ WARRANTY+RETURNS ∙ INTERNATIONAL TAX ∙ ABOUT ∙ PRIVACY ∙ NEWS ∙ CONTACT
© SDHDIGITAL LTD 2026
SITEMAP