[PATCH] More auto framerate switching - HIMEDIAPLAYER

[aleister]

Does latest Patch Version  work with FW 2.4?

I need the Patch because even 2.4 cant auto change fps  50/60fps Sources

[pcristi]

1.1.2 --> intend to supported, same link like v1.1.0 from OP.

Changelog:

1.1.2
- fix for FW v2.0.4 Android 7.0

1.1.1
- 4096x2160/23.976 --> 3840x2160/23.97Hz

Does latest Patch Version  work with FW 2.4?

I need the Patch because even 2.4 cant auto change fps  50/60fps Sources

[aleister]

Perfect, Thank you!

[aleister]

installed it on 2.4 FW, worsk nice!

But the FPS Switch has a Delay when the Movie starts ? I cant remember it was present in Android 5 FW ?

The Moviestarts for 1-3 Seconds before the Patch change the Framerate ?

[sherakin]

@pcristi

Could you check please the following with firmware 2.0.4.?

The switch doesnt work for 3D Bluray iso's if you change from 3D to 2D. If you change it from 3D to 2D, the file plays in 60hz (my standard settings are 1080 and 60hz). With the last firmware (2.0.1.)  everything went well.

2D Bluray iso's are ok and switch to 23.976 (24) works.

All other materials work great with the switch.

PS: No effect if i put the 24hz switch in himedia on or off.

[Kontrapunktus]

I just installed CFW 2.0.4 on my q5pro. Everything looks OK, but some options have changed. For instance in Settings - Playback no 24Hz option appears now (instead it appears a "Frame rate adaptation" option.

I have installed the auto framerate switching for Himedia Player (patch v. 1.1.2). The patch is correctly applied but it does not seem to work, no matter if the "Frame rate adaptation" option is ON or OFF. What am I doing wrong?

Thanks

[pcristi]

@sherakin
1.1.3
- fix 3D-->2D switch regressions
Thanks for reported

[casino187]

I just installed CFW 2.0.4 on my q5pro. Everything looks OK, but some options have changed. For instance in Settings - Playback no 24Hz option appears now (instead it appears a "Frame rate adaptation" option.

I have installed the auto framerate switching for Himedia Player (patch v. 1.1.2). The patch is correctly applied but it does not seem to work, no matter if the "Frame rate adaptation" option is ON or OFF. What am I doing wrong?

Thanks

I just updated my q10 to 2.0.4 and installed this patch.  It didn't work at first so I switched "frame rate adaptation" to "open" and now it works fine.

[sherakin]

@sherakin
1.1.3
- fix 3D-->2D switch regressions
Thanks for reported

Great job! Thank you!

[Kontrapunktus]

I just installed CFW 2.0.4 on my q5pro. Everything looks OK, but some options have changed. For instance in Settings - Playback no 24Hz option appears now (instead it appears a "Frame rate adaptation" option.

I have installed the auto framerate switching for Himedia Player (patch v. 1.1.2). The patch is correctly applied but it does not seem to work, no matter if the "Frame rate adaptation" option is ON or OFF. What am I doing wrong?

Thanks

I just updated my q10 to 2.0.4 and installed this patch.  It didn't work at first so I switched "frame rate adaptation" to "open" and now it works fine.

Finally the problem got solved by reinstalling official FW 2.0.4 and the auto framerate switching patch 1.1.3. Now it works great for most files.

However, I have observed that it does not switch when playing BDMV folders. I have several 1080 30Hz BDMV which play at 30Hz (do not switch to 60Hz).

[casino187]

@sherakin
1.1.3
- fix 3D-->2D switch regressions
Thanks for reported

Great job! Thank you!

can you guys elaborate on what this 3d to 2d switch regressions means?  I just tested a bluray 3d iso that is 23.976 fps and is sending a 24hz signal.  Is this correct? I expected 23.976 like the 2d movies.

[aleister]

The 24hz Output on 3D ISO is a SDK Problem....cant be fixed from this Patch so far i think.
We have to wait for a SDK Update /new FW from Himedia

[mihailuican]

In installed CFW2.0.4 and working allright.
After readint these, aI also installed this patch. Running the patch was alright, Q10pro rebooted, but the BAT application hangs, does not return to prompt after the square with "rebooting device", I cannot exist by command. Why is that?

[xalaros]

Hello,

i have firmware 2.0.4 custom and installed autoframeswitch 1.1.3 didn't know if it was already there so i run the bat file anyways.
So here is my problem. When i have 1080P 60Hz as the interface resolution. Framerate changes correctly but if i play a 4K file the resolution
doesn't change to 4k(on my tv the info still says 1080p). Also if i play a 720p video the resolution still remains at 1080p only framerate changes.
This maybe normal but just wanted to check.
My problems start when i change the interface resolution to 2160p60Hz. as it seems here if i play a file at 4K then the frame rate changes correctly but problems start when i play 1080p or 720p videos. I get no signal from the TV and only if i reboot the box or if i stop the video and press the tv mode button on the remote a few times just to get a proper resolution again and i get a signal back.
This maybe an issue with my TV(LG uf850) not changing properly between resolutions is anybody else having the same issues???

My q5 pro is directly connected to my TV on HDMI2 and i have sound from spdif to my pioneer receiver, since my receiver is only 1080p capable i  connected the box directly to tv just to have the 4k option. I  suspect the the problem may be with the colour space switching from 1080p Ycbcr444 10bit to Ycbcr422 8bit on 4k and vise versa, i have deep colour enabled on my TV(no HDR capability). any thoughts?

[pcristi]

@xalaros
autoframeswitch 1.1.3 doesn't change resolution, to hard to ensure compatibility with need it resolution, TV and cables without popup of visual confirmation.