[PATCH] More auto framerate switching - HIMEDIAPLAYER

[saj2001ind]

I have just bought the Q10 pro it comes with 2.0 firmware with Android 7

Does this have these frame switching built into himediaplayer player ? I see only 24p frame option in the himediaplayer

Can any one confirm this pls or any setting I am missing

[looun]

I have just bought the Q10 pro it comes with 2.0 firmware with Android 7

Does this have these frame switching built into himediaplayer player ? I see only 24p frame option in the himediaplayer

Can any one confirm this pls or any setting I am missing

Do you have read first post?

[saj2001ind]

I have read but I coundnt find any setting for this switching on himedia player...it just has 24p on or off

[looun]

I have read but I coundnt find any setting for this switching on himedia player...it just has 24p on or off

24p mode turned on in settings Q5/Q10 Pro with FW 1.0.7 and later already has: 50/60 Hz > 23.976/24/25/30/29.97 Hz.

[rdpm]

Hello.
Good work, but I have read the whole thread but still confused: I assume that 1080 24p setting must be on, but which output resolution should I select in the main screen? I own different resolution stuff (720p, 1080p) and my TV is 4K/30hz.
Thank you for your help.

[saj2001ind]

I have read but I coundnt find any setting for this switching on himedia player...it just has 24p on or off

24p mode turned on in settings Q5/Q10 Pro with FW 1.0.7 and later already has: 50/60 Hz > 23.976/24/25/30/29.97 Hz.

so this means the 50/60 Hz contents are played 23.976/24/25/30/29.97 Hz ?

[futeko.com]

so this means the 50/60 Hz contents are played 23.976/24/25/30/29.97 Hz ?

In any official firmware since 1.0.7, with 24p mode turned on in Settings - Playback the box will automatically switch from 50 or 60Hz to 23.976 or 24 or 25 or 30 or 29.97 Hz if it's appropriate for the content.

[saj2001ind]

so this means the 50/60 Hz contents are played 23.976/24/25/30/29.97 Hz ?

In any official firmware since 1.0.7, with 24p mode turned on in Settings - Playback the box will automatically switch from 50 or 60Hz to 23.976 or 24 or 25 or 30 or 29.97 Hz if it's appropriate for the content.

ok perfect so my understanding was correct that even 50 or 60 HZ content will play in 24 or 25 or 30 or 29.97 Hz

cant we have separate option for 50/60 HZ content to play in 50 or 60 and not lower....I have noticed this creates not so smooth playback....I have another player which has both these settings separately and plays appropriately and not in different HZ mode

[futeko.com]

ok perfect so my understanding was correct that even 50 or 60 HZ content will play in 24 or 25 or 30 or 29.97 Hz

cant we have separate option for 50/60 HZ content to play in 50 or 60 and not lower....I have noticed this creates not so smooth playback....I have another player which has both these settings separately and plays appropriately and not in different HZ mode

Your understanding is not correct.

Framerate will only switch to 23.976 / 24 / 29.97 etc if the content is at that fps.

If the system refresh rate (Android rate) is set to 50Hz, 50fps content would play at 50Hz. Of course there isn't much 50fps (or 60fps) content..

[Mount81]

Hello.
Good work, but I have read the whole thread but still confused: I assume that 1080 24p setting must be on, but which output resolution should I select in the main screen? I own different resolution stuff (720p, 1080p) and my TV is 4K/30hz.
Thank you for your help.

For 720p/1080p content the best is to set 1080p res on the Himedia Box and let the TV do the upscalling. For 4K stuffs, set the player to 4K res also.

(Hower it would be great if the player could auto detect the source resolution and switch automaticly respectively to it.)

[switchblade]

(Hower it would be great if the player could auto detect the source resolution and switch automaticly respectively to it.)

+1  This feature is LATE, should have already been included in the last FW releases.  Lame we have to manually change this setting.

[futeko.com]

(Hower it would be great if the player could auto detect the source resolution and switch automaticly respectively to it.)

+1  This feature is LATE, should have already been included in the last FW releases.  Lame we have to manually change this setting.

The feature is not late. It's been passed to HiMedia as a feature request but that's all, it's never been promised.

It's also worth mentioning that practically no other android media boxes do this. It would be tricky to implement and would likely result in many instances of no HDMI output when box switches to an output resolution not supported by connected TV/projector.

[safcsat]

(Hower it would be great if the player could auto detect the source resolution and switch automaticly respectively to it.)

+1  This feature is LATE, should have already been included in the last FW releases.  Lame we have to manually change this setting.

The feature is not late. It's been passed to HiMedia as a feature request but that's all, it's never been promised.

It's also worth mentioning that practically no other android media boxes do this. It would be tricky to implement and would likely result in many instances of no HDMI output when box switches to an output resolution not supported by connected TV/projector.

It works very well on Enigma2 Sat boxes, but as you say don't think any other Android boxes offer this.  Again this could be something to really put the q10 ahead of other boxes.

[futeko.com]

It works very well on Enigma2 Sat boxes, but as you say don't think any other Android boxes offer this.  Again this could be something to really put the q10 ahead of other boxes.

I agree and it's something I have mentioned to HiMedia.

[dorol]

After input my Q10  ip i get "adbd is already running as root" and nothing happens.
Any advice?
Thanks