Buglist

[ppoulos]

I have a Q10 Pro connected to a Pioneer SC-99 receiver, and then to an LG 65EF9500 4K-HDR OLED display. All HDMI ports are at least HDMI 2.0 compatible (I am waiting on firmware upgrade for Pioneer AVR to make its ports HDMI 2.0a compatible). I have set the Q10 Pro to power on last so that all devices are on and it can read a proper EDID from the AVR.

Has anyone noticed that the Q10 Pro does not maintain display resolution on powerup. I set to Q10 Pro Display resolution to 2160p@60Hz, YCbCr 4:2:0-8Bit (to maintain a 300 Mhz signal until I upgrade all my HDMI Cables). Everything works great until I power off the Q10 Pro.

When I restart the Q10 pro the startup screen defaults to 1080i YCrCb 4:4:4-10bit (as reported by the Pioneer AVR). But when it finally switches to the main display it does not reset the resolution back to 2160p. Am I missing something? Is this a bug, or is there an option I need to set to have the Q10Pro resume the prior set Resolution?

[Nice Monkey]

I removed 2 Points from the Buglist fixed in 1.0.3

Anything else solved?

I think the UI Error is something happening only once. Never saw it a second time. With the new FW it again happened only once.

[Fa.Ch]

I have laid my Q10 this weekend to a friend and he found a big gap on some files in VO and there subtitles of times more than 1 second. But in the settings, it is not possible to adjust more than 1 second +/- .... Has someone already seen this problem ?

To be fixed anyway

[magnifico]

I removed 2 Points from the Buglist fixed in 1.0.3

Anything else solved?

I think the UI Error is something happening only once. Never saw it a second time. With the new FW it again happened only once.

If nobody else has problems with system UI with new firmware I try to remember to delete it from the list...in a few days.

[futeko.com]

If nobody else has problems with system UI with new firmware I try to remember to delete it from the list...in a few days.

Not a totally impartial report, but I've had a Q10 Pro with latest firmware running for 48 hours without UI error. So I think it's fixed.

[magnifico]

[flydini]

I have a problem with the latest update which came with Power app. Sleep and reboot works but whenever I tried to shut down from this app. it always froze. The power button works well but app. does not power off. I will try to uninstall and reinstall again from google play store if I can find.

[salalee]

hi magnifico, the message "unfortunately system UI has stopped" occurred only once on 1.0.3
thanks

[futeko.com]

I have a problem with the latest update which came with Power app. Sleep and reboot works but whenever I tried to shut down from this app. it always froze. The power button works well but app. does not power off. I will try to uninstall and reinstall again from google play store if I can find.

You must have installed the CS custom firmware because official firmware doesn't have a power app?

That power app doesn't work properly with Q10 Pro. It's discussed in the 1.0.1 custom firmware thread here: http://www.futeko.com/newforum/index.php?topic=908.0

I suggest posting in the latest custom firmware thread and asking the firmware creator to remove or replace the app: http://www.futeko.com/newforum/index.php?topic=907.0

[futeko.com]

anything else than exact 1080p is not recognized as 24P.

You keep saying this, but it's not true. 4K and 1080P auto-switch as expected. Anything below 1080P does not.

[Alter_Schwede62]

Cropped 1080p (f.e. 1920x800p) too don't autoswitch framerates.

[magnifico]

[futeko.com]

For auto-switch resolution, 1080p works + 4K works.

The rest is being worked on.

[magnifico]

[futeko.com]