New Uk Power lead required

[Icarium20]

Hello All

My Q10pro box is perpetual loop of reboot for x hours. Eventually it will stop with the CFW Home Screen showing, however once I use the remote it will reboot again. Someone suggested this may have something to do with the power lead ( not sure how ), however as unit unusable presently would like to have a go. How or where do I purchase one, and are their any alternatives leads that work on the pro10.

Many thanks

A link to the site would be useful 😉

[futeko.com]

You can use any 12V 1.5A+ PSU (up to 4A). Tip size is 5.5 x 2.1 with center pin positive.

This is a cheap option:

https://www.amazon.co.uk/Supply-100-240V-Converter-Adapter-Transformer-Multicolor/dp/B08J3W6M9G/ref=sr_1_11?crid=1R1Y5GQWWFUJP&dchild=1&keywords=12v+2a+5.5mm+2.1mm&qid=1614850159&sprefix=12v+2A+5.5%2Caps%2C155&sr=8-11

Higher amperage is better if you use the internal HDD or multiple USB HDDs. Up to 4A.

[Icarium20]

Okay thanks @ ordered.

I’ll let you know how it functions in the immediate future

Regards

[Icarium20]

Hello All

As promised reporting back. Bought the above linked power cable from Amazon.

After two weeks have had none of the previous problems as reported, so cable is working fine, and the old one must have been the problem, so thanks to the original member who suggested the cure, in abstentia, and to Futeko for the link.

Know need to get the scrolling problem sorted on another post  and i'm fixed
Best regards,