Q5 4K3D. 5-NOV-2015. FIRMWARE HMD-3.0.2 FUTEKO-EN

[futeko.com]

Q5 4K3D. 5-NOV-2015. FIRMWARE HMD-3.0.2 FUTEKO-EN.

Internal build number: HMD-3.0.2 2015-11.05.105633

IMPORTANT! THIS FIRMWARE IS FOR EUROPEAN Q5 4K3D (MANUFACTURED AFTER NOVEMBER 2014) ONLY. DO NOT TRY AND FLASH IT TO OTHER REGION Q5 4K3D.

Installation Instructions:

1. Extract update.zip from the download archive to the root of a USB pen drive. (the USB pen drive should contain a single file called 'update/zip').
2. Insert the USB pen drive into any USB port of the Q5 4K3D.
3. With the Q5 4K3D turned off, use a paper clip or pen to press and hold the the pinhole restore button on the side of the Q5 4K3D (next to the USB ports).
4. While keeping the restore button pressed, turn on the Q5 4K3D.
5. The Q5 4K3D will show an Android droid logo and proceed to upgrade the firmware.
6. The box will auto-reboot when finished.

Q5 4K3D. 5-NOV-2015. FIRMWARE HMD-3.0.2 FUTEKO-EN Changelog:

1. KODI 15.2 FINAL VERSION
2. Support Status Bar
3. Support LED turn on/off
4. Support Subtitle turn on/off
5. Update Skype
6. Support OTA online update function
7. Preinstall Wrapper
8. Preinstall Happycast

Unofficial:

9. Model number change to Q5EN.2001
10. Improved NFS search in Media Center

Download link: http://www.mediafire.com/download/r0l7qo0dtk7smtb/Q5_4K3D._5-NOV-2015._FIRMWARE_HMD-3.0.2_FUTEKO-EN.zip

* Stop navigation bar from popping up when mouse cursor at bottom of screen (firmware 3.0.2 only, Q5/Q10/M3) Install this update file: http://www.mediafire.com/download/c4gb03d2p3suc67/update.zip To install copy file to USB stick and go Settings - Upgrade - Local upgrade. It will only remove the navigation bar and make no other changes to your setup.

[skank]

nice
thank you

[futeko.com]

Download link added.

Sorry for the delay, extremely slow broadband upload speeds.

[dorol]

Preinstall Wrapper?
No Wrapper (in Kodi) here after clean install Q5 4K3D. 5-NOV-2015. FIRMWARE HMD-3.0.2 FUTEKO-EN.
Only kodi internal player. No " play using" option.
In apps is listed.
But in "sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/", no playercorefactory.xml file.

[hdmkv]

Why? For me it's the first time I see a firmware which can't be downgraded.

Maybe a new SDK, which usually means no downgrading as kernel gets updated too.

Preinstall Wrapper?

What HiMedia means is that the wrapper APK (app) has been preinstalled. You still need to run Kodi once, exit out, then open the wrapper app to apply HiMedia's custom playercorefactory.xml.

[dorol]

Done.
Thank you, hdmkv.

[futeko.com]

I've been talking to Himedia about why they've stated that this firmware cannot be downgraded, and in fact it CAN be downgraded just like previous firmwares.

I think something got lost in translation. What they meant to say is that this firmware has OTA updates enabled so they don't want you to downgrade so you receive future updates.

[airsoft]

Q5 4K3D. 5-NOV-2015. FIRMWARE HMD-3.0.2 FUTEKO-EN.

1. KODI 15.2 FINAL VERSION
2. Support Status Bar
3. Support LED turn on/off
4. Support Subtitle turn on/off
5. Update Skype
6. Support OTA online update function
7. Preinstall Wrapper
8. Preinstall Happycast

Where is available "4. Support Subtitle turn on/off" ?
Media center has already ability to stop using internal/external subtitles.

[farlucco]

is it possible to toggle the status bar (that appears when the pointer is on the bottom of the screen.....) ?
very annoying ....!
and cause problem with some app (sopcast,acestream.....) cause there are option on the bottom of the screen....but when you go down the status bar appears....and isn't possible to push that option!!!!?!?!?!?!?!? 

[pcristi]

Download navigation_bar_android.zip

Rename navigation_bar_android.zip to update.zip and copy to  USB pen drive
Insert the USB pen drive into any USB port of the Q5/Q10  4K3D
From Launcher go to settings / Upgrade / Local Upgrade / Please Choose Drive: where update.zip is locate
Player is reboot and Android droid is show for few seconds and wait to start normal
Navigation bar is inactiv qemu.hw.mainkeys=1

If want to re-enabled  navigation bar use this update.zip with restore button and paper clip, Navigation bar is set back to qemu.hw.mainkeys=0
Update with navigation_bar_android.zip not wipe your data/sdcard.

[futeko.com]

Download navigation_bar_android.zip

Rename navigation_bar_android.zip to update.zip and copy to  USB pen drive
Insert the USB pen drive into any USB port of the Q5/Q10  4K3D
From Launcher go to settings / Upgrade / Local Upgrade / Please Choose Drive: where update.zip is locate
Player is reboot and Android droid is show for few seconds and wait to start normal
Navigation bar is inactiv qemu.hw.mainkeys=1

If want to re-enabled  navigation bar use this update.zip with restore button and paper clip, Navigation bar is set back to qemu.hw.mainkeys=0
Update with navigation_bar_android.zip not wipe your data/sdcard.

Excellent work.

[skank]

Can someone show with screens whats adjusted?

[hdmkv]

@pcristi, what does the nav bar do?

[pcristi]

@pcristi, what does the nav bar do?

Android Navigation Bar know like soft navigation buttons you can access back, home and recent apps starting with Android API level 11 and with API level 14 is possible to be automatic hide. HiMedia Navigation Bar is was improved with -/+ volume control.

If you need more information please sent me private message .

[dynamic503]

Q5 4K3D. 5-NOV-2015. FIRMWARE HMD-3.0.2 FUTEKO-EN.

Internal build number: HMD-3.0.2 2015-11.05.105633

IMPORTANT! THIS FIRMWARE IS FOR EUROPEAN Q5 4K3D (MANUFACTURED AFTER NOVEMBER 2014) ONLY. DO NOT TRY AND FLASH IT TO OTHER REGION Q5 4K3D.

Installation Instructions:

1. Extract update.zip from the download archive to the root of a USB pen drive. (the USB pen drive should contain a single file called 'update/zip').
2. Insert the USB pen drive into any USB port of the Q5 4K3D.
3. With the Q5 4K3D turned off, use a paper clip or pen to press and hold the the pinhole restore button on the side of the Q5 4K3D (next to the USB ports).
4. While keeping the restore button pressed, turn on the Q5 4K3D.
5. The Q5 4K3D will show an Android droid logo and proceed to upgrade the firmware.
6. The box will auto-reboot when finished.

Q5 4K3D. 5-NOV-2015. FIRMWARE HMD-3.0.2 FUTEKO-EN Changelog:

1. KODI 15.2 FINAL VERSION
2. Support Status Bar
3. Support LED turn on/off
4. Support Subtitle turn on/off
5. Update Skype
6. Support OTA online update function
7. Preinstall Wrapper
8. Preinstall Happycast

Unofficial:

9. Model number change to Q5EN.2001
10. Improved NFS search in Media Center

Download link: http://www.mediafire.com/download/r0l7qo0dtk7smtb/Q5_4K3D._5-NOV-2015._FIRMWARE_HMD-3.0.2_FUTEKO-EN.zip

1. How to root and unroot this firmware?
2. Support Status Bar: where can i found it?
3. Is there any other kernel for this player Q5 4K for better?
Thanks