OFFICIAL Q10 PRO FIRMWARE. FUTEKO. HMD-2.0.4 2017-07-05

[Mount81]

[szrobert]

[futeko.com]

I was really hoped that it will be finally a good upgrade, but I had to be disappointed again... In this way the whole Imprex is totally useless. The flickering was also present in 2.0.3, and the history of the problem goes way back to the beginning. (I guess neither 1.1.0 nor 2.0.1 had it). So I will still have to stick to the good old 1.0.9 (after so many months waiting)...

You could just turn off Imprex?

Picture quality is excellent without it and your TV probably has a setting replicating some of what Imprex does.

[mikrocefal]

and it is not fluid with 23.975 p/s  =====> bad firmware 2.0.4   
it is not serious ,i am disappointed
i reinstall 2.0.1 fw

[ryderark]

I have the opposite impression  .

Kodi version 17.3 - Turns on once for several attempts,Pops up the message when enabled: System process not repsonding, Kodi not responding.

Remote controler Rii i25 - OK button does not always react, During youtube playback, I can not change the quality of watching movies, The arrow on the TV screen turns into a dash And I have to use a standard remote control which is very frustrating

Any comments? Only I have a problem with Kodi and Rii25?

I'd say remote controller works worse than before. I've noticed Q10 doesn't seem to notice a fair amount of clicks on the remote. Many times you have to click again for it to get the signal.

[CatchMeZZo]

The wrapper on 2.0.4 can't save my samba account? After a restart he lost my Account and Password?! WHAT THE HELL o.O

[dukunmagic]

Hi, since 2.04, I can't find my NAS (synology 1813+), through media centre LAN or Kodi.
Media Centre - LAN - Auto search : "No Server"
I have tried installing 2.04 custom firmware with same result.
But via ES File Explorer, it can find my network (NAS).

I didn't have this issue with 2.03 and before.

Please help..

And how can I re-install 2.03 ? Currently I'm on 2.04 Custom Firmware.
I have tried re-install 2.04, downgrade to 5 first, etc, not success....

[usul]

Here is my thoughts on new 2.04 firmware...

Im coming from 2.01 as had too many issues with 2.03..

So far I think this firmware is awesome. And best I have used... Was worth the wait...

I use emby server over a gigabit network using kodi 17.3 and wrapper with emby kodi addon.

All my 4k, 3d mvc ISO, mkv, etc, all play smooth, no stuttering..

My 4k files are over 100Mbps and play perfect...
Emby is set to use smb direct for streaming..

Picture quality has improved, and sound also it seems...

I can now use all hardware acceleration in kodi for addons in kodi... And now all video plays without freezing and stuttering..
With previous firmware, had to turn off one of the hardware accelerator to get non studdering  video with addons..

Awesome...

Also seems 3d mvc 24fps ISO now play perfect... (limited testing, but so far so good).

Interface overall seems snapper and now hdr works great.....

Im a happy... Well done..

Just wish we had auto resolution switching...
So if watching 1080p files, it outputs 1080p. And if 4k, changes to 4k output...

Im using high end gear, with a projector, and everything seems to work nicer now...

Thanks

[usul]

Hi, since 2.04, I can't find my NAS (synology 1813+), through media centre LAN or Kodi.
Media Centre - LAN - Auto search : "No Server"
I have tried installing 2.04 custom firmware with same result.
But via ES File Explorer, it can find my network (NAS).

I didn't have this issue with 2.03 and before.

Please help..

And how can I re-install 2.03 ? Currently I'm on 2.04 Custom Firmware.
I have tried re-install 2.04, downgrade to 5 first, etc, not success....

I had this issue on 2.01 also..

Easy fix...

Don't use auto...

Use manual..
Enter the ip address etc, and it will work...

[dukunmagic]

Here is my thoughts on new 2.04 firmware...

Im coming from 2.01 as had too many issues with 2.03..

So far I think this firmware is awesome. And best I have used... Was worth the wait...

I use emby server over a gigabit network using kodi 17.3 and wrapper with emby kodi addon.

All my 4k, 3d mvc ISO, mkv, etc, all play smooth, no stuttering..

My 4k files are over 100Mbps and play perfect...
Emby is set to use smb direct for streaming..

Picture quality has improved, and sound also it seems...

I can now use all hardware acceleration in kodi for addons in kodi... And now all video plays without freezing and stuttering..
With previous firmware, had to turn off one of the hardware accelerator to get non studdering  video with addons..

Awesome...

Also seems 3d mvc 24fps ISO now play perfect... (limited testing, but so far so good).

Interface overall seems snapper and now hdr works great.....

Im a happy... Well done..

Just wish we had auto resolution switching...
So if watching 1080p files, it outputs 1080p. And if 4k, changes to 4k output...

Im using high end gear, with a projector, and everything seems to work nicer now...

Thanks

Could you please explain why do you need emby server ? Why not just samba or nfs share within your local network ?
what is the benefit of emby ?

Thanks

[futeko.com]

And how can I re-install 2.03 ? Currently I'm on 2.04 Custom Firmware.

I don't think downgrading to 2.0.3 is a good idea. It's a bad firmware.

But, if you really wanted to then you should be able to install 2.0.3 direct over 2.0.4 using RESTORE button method (instructions in firmware thread).

[dukunmagic]

Sorry, do you mean the regular flashing firmware (update.zip in usb root, press "upgrade" button + power on, then release it when android logo appears ?
Cause when I do that, the android logo appears with error sign, then reboot.

[dukunmagic]

Hi, since 2.04, I can't find my NAS (synology 1813+), through media centre LAN or Kodi.
Media Centre - LAN - Auto search : "No Server"
I have tried installing 2.04 custom firmware with same result.
But via ES File Explorer, it can find my network (NAS).

I didn't have this issue with 2.03 and before.

Please help..

And how can I re-install 2.03 ? Currently I'm on 2.04 Custom Firmware.
I have tried re-install 2.04, downgrade to 5 first, etc, not success....

I had this issue on 2.01 also..

Easy fix...

Don't use auto...

Use manual..
Enter the ip address etc, and it will work...

It doesn't work. It always say "Query is error".
Really stressfull..

[q10pro1]

fw 2.0.4

 Fine installation not 100%. It reaches 90%, 95% ends and restarts
it's normal?

Ps modality installation with reset button

it's normal ? futeko
thank you

[tmihai20]

fw 2.0.4

 Fine installation not 100%. It reaches 90%, 95% ends and restarts
it's normal?

Ps modality installation with reset button

it's normal ? futeko
thank you

Have you put the actual update.zip on the flash drive from the downloaded archive and not the archive you downloaded? Check the zip file you are putting on the USB stick.