3D Ghosting

[steved]

Had another go at fixing my 3D ghosting issue tonight and spent an hour trying every possible depth setting on my Epson projector but after sometime I concluded that if I concentrate on details in the background this then makes the features in the foreground much worse. This also applies if I try front to back. I don't seem able to get an happy middle ground where both fore and rear images are the same and free of ghosting. Starting to think maybe my projector is faulty. However I do also feel that a lack of depth controls on the Himedia player itself maybe another factor 

[hdmkv]

looun reported he noticed ghosting as well, but it would be good for others to test and report back, and name which displays and glasses combos they used.

[djjinx1]

No Ghosting here, latest firmware (it says 1.0.9 but recently purchased from here so should be latest yes?)

I use g15 glasses and an Optoma HD151X (onto grey screen wall)

Tried a few 3D Iso'd inc Frozen, Titanic and Edge Of Tomorrow 

[hdmkv]

Thanks for checking. BTW, any audio dropouts while watching 3D or 2D 23.976 content (this issue I do have)?

[djjinx1]

What content would be 23.976 to check? I do not HD Audio btw

[Marvel]

I have the Q5quad and no ghosting . If I gosting is it on film .

[MortUK]

Any audio dropouts Marvel.? Ghosting appears to be dependant on the equipment you're using..

[Marvel]

No , it all goes perfectly with me . I have audio only drops when I change the time at Audio Device Keep Alive I should be only used it to 1 minute let

*Sorry for my english

[hdmkv]

What content would be 23.976 to check? I do not HD Audio btw

Any Blu-ray rip.

[steved]

Does anyone know of a way that I can check if my projector is at fault when it comes to 3D Ghosting issues (ie: can it be configured or a test run to proof its okay or not for 3D video.
It seems to me looking at the replies that most people don't have a problem with ghosting so it must be my equipment that's at fault, maybe even the HDMI lead or the amp ??  is this possible.

[MortUK]

Perhaps try a bluray player with a 3D disc..?

Maybe you know someone who could lend you one for a couple of hours.?

[steved]

Has it happens I do own a 3D Blu-ray player which I haven't used for maybe 3 years..which I will try later thanks.

[djjinx1]

What content would be 23.976 to check? I do not HD Audio btw

Any Blu-ray rip.

My 3D Iso's say 1080 24 though???

[looun]

looun reported he noticed ghosting as well, but it would be good for others to test and report back, and name which displays and glasses combos they used.

i have TV Panasonic plasma 3D 50GT30 and active 3d glasess

What content would be 23.976 to check? I do not HD Audio btw

Any Blu-ray rip.

My 3D Iso's say 1080 24 though???

all blueray disc is 1080p  at 23.976 , usually TV report  24p/24hz or true cinema "label" for simplify . 
where do yuo see "24" ?

[djjinx1]

My projector comes up as 1080p 24hz when I play Iso (3D)