Q5 and HDMI-CEC problem

[lukappaseidue]

Hi looun,
thank you again for your reply.
I have written here in this forum to look for futeko official answare (that is not still arrived).
Will a future firmware fix the issue or no chance to solve it by fw upgrading?

[hansolo]

Well, for me the CEC problem has a solution somehow strange. I have Q5, bluray (both in Yamaha receiver on hdmi 2/hdmi 1) ans Samsung with ARC.
If I start TV and receiver I have no ARC from TV to receiver, unless I start Q5.
If I start Q5 and receiver/TV I have no sound from q5 (receiver started on hdmi2) unless I chenge receiver to hdmi 1 and again on hdmi 2/
If I start bluray, receiver, TV I have no control to sound from TV remote unless I start Q5...
It will be great if CEC could be disabled from Q5 settings, otherwise looun's solution (to cut pin 13) is best...

[looun]

same problem was report on himedia official forum
http://bbs.himedia.cn/thread-195178-1-1.html

[wiz]

You guys have saved me a lot of money. Was going to buy another Receiver to cure this problem only to find out it wouldn't have!

[wongregor@gmail.com]

I have cut pin 13( CEC ) on HDMI cable, now CEC and ARC work.
5 minute 0$, I used a really thin paper clip to first jam the pin back

Hello, I also need to lock the 13 pin, but I found two different pinouts in hdmi.
https://drive.google.com/file/d/1tO01KWTV-bXRmK5sZqGSozD9TDtNzYa9/view?usp=sharing
https://drive.google.com/file/d/18P0LKNgK5SJT90LUV0IBAqlYJF1rkYmc/view?usp=sharing
Which is correct ?
Ok, I have it!