Q10 PRO FIRMWARE. ANDROID 7. FUTEKO. HMD-2.0.1 2017-01-10.164949

[futeko.com]

Q10 PRO FIRMWARE. ANDROID 7. FUTEKO. HMD-2.0.1 2017-01-10.164949

THIS FIRMWARE IS FOR INTERNATIONAL/EUROPEAN HIMEDIA Q10 PRO ONLY.

DO NOT TRY AND FLASH IT TO CHINESE HARDWARE Q10 PRO OR PREVIOUS GENERATION Q10 4K3D.

YOU WILL LOSE ALL USER INSTALLED APPS AND SETTINGS! PLEASE BACK UP BEFORE UPDATING (Kodi backup: http://kodi.wiki/view/backup).

Changelog:

1. Recent Key out of operation issue fixed
2. Some HDDs unrecognizable issue fixed
3. Samba copy at low speed issue fixed
4. Video playback fastward buffering issue fixed
5. Bluetooth auto enable after turn off issue fixed
6. Certain applications unable to install issue fixed
7. Wrapper unable to playback the videos in NFS issue fixed
8. Support KODI 17.0
9. Airplay support for IOS10.2
10. Default support widevine L3
11. HDMI compatibility improved
12. Advanced setting descriptions optimized
13. Wifi handling capacity improved
14. Key touch-tone has been turned off

THERE ARE DIFFERENT FIRMWARE DOWNLOADS DEPENDING ON WHICH FIRMWARE (ANDROID 5.1 or ANDROID 7) IS CURRENTLY INSTALLED.

INSTALL THE CORRECT UPGRADE FIRMWARE FOR YOUR CURRENTLY INSTALLED ANDROID VERSION.

INSTALLING THE INCORRECT VERSION COULD BRICK YOUR Q10 PRO

Instructions if Android 7 (firmware version 2.0.0 and later) currently installed on Q10 Pro

1. Extract update.zip (using an unzip program like 7zip, winzip etc) from Q10_PRO_FIRMWARE._ANDROID_7_TO_ANDROID_7._FUTEKO._HMD-2.0.1_2017-01-10.164949._Q10_PRO_MUST_ALREADY_BE_RUNNING_ANDROID_7_TO_INSTALL_THIS_FIRMWARE.zip to the root of a FAT32 formatted USB pen drive. (the USB pen drive should contain a single file called 'update.zip').
2. Insert the USB pen drive into any USB port of Q10 Pro.
3. With Q10 Pro turned off, use a paper clip or pen to press and hold the the pinhole UPGRADE button on the back of Q10 Pro (next to the power port).
4. While keeping the UPGRADE button pressed, turn on the Q10 Pro.
5. Q10 Pro will show the Android 7 coloured circle upgrade logo.
6. When you see the coloured circle upgrade logo you can release the restore button.
7. A progress bar will indicate update progress. Do not turn box off or use the box/remote during update!
8. When update is complete the box will automatically reboot.
9. First boot will take 3-5 minutes. The box will reboot into new Android 7 firmware. Allow boot to complete.

Download: http://www.mediafire.com/file/n0dbl6vgut3h7gy/Q10_PRO_FIRMWARE._ANDROID_7_TO_ANDROID_7._FUTEKO._HMD-2.0.1_2017-01-10.164949._Q10_PRO_MUST_ALREADY_BE_RUNNING_ANDROID_7_TO_INSTALL_THIS_FIRMWARE.zip

Instructions if Android 5.1 (firmware version 1.0.1 - 1.1.0) currently installed on Q10 Pro

1. Extract update.zip (using an unzip program like 7zip, winzip etc) from Q10_PRO_FIRMWARE._ANDROID_5.1_TO_ANDROID_7._FUTEKO._HMD-2.0.1_2017-01-10.164949._Q10_PRO_MUST_BE_RUNNING_ANDROID_5.1_TO_INSTALL_THIS_FIRMWARE.zip to the root of a FAT32 formatted USB pen drive. (the USB pen drive should contain a single file called 'update.zip').
2. Insert the USB pen drive into any USB port of Q10 Pro.
3. With Q10 Pro turned off, use a paper clip or pen to press and hold the the pinhole UPGRADE button on the back of Q10 Pro (next to the power port).
4. While keeping the UPGRADE button pressed, turn on the Q10 Pro.
5. Q10 Pro will show the Android 5.1 green droid upgrade logo.
6. When you see the Android 5.1 green droid logo you can release the restore button.
7. A progress bar will indicate update progress. Do not turn box off or use the box/remote during update!
8. When update is complete the box will automatically reboot.
9. First boot will take 3-5 minutes. The box will reboot into new Android 7 firmware. Allow boot to complete.

Download: http://www.mediafire.com/file/5vkw8rvc8l8681i/Q10_PRO_FIRMWARE._ANDROID_5.1_TO_ANDROID_7._FUTEKO._HMD-2.0.1_2017-01-10.164949._Q10_PRO_MUST_BE_RUNNING_ANDROID_5.1_TO_INSTALL_THIS_FIRMWARE.zip

[futeko.com]

How to downgrade from Android 7 to Android 5.1?

THESE INSTRUCTIONS ARE FOR EUROPEAN/INTERNATIONAL Q10 PRO RUNNING ANDROID 7 FIRMWARE (2.0.0 AND LATER) ONLY!

DO NOT INSTALL THIS FIRMWARE IN ANY OTHER CIRCUMSTANCES!

1. Extract update.zip (using an unzip program like 7zip, winzip etc) from HIMEDIA_Q10_PRO_DOWNGRADE_FROM_ANDROID_7_TO_ANDROID_5.1.zip to the root of a FAT32 formatted USB pen drive. (the USB pen drive should contain a single file called 'update.zip').
2. Insert the USB pen drive into any USB port of Q10 Pro.
3. With Q10 Pro turned off, use a paper clip or pen to press and hold the the pinhole UPGRADE button on the back of Q10 Pro (next to the power port).
4. While keeping the UPGRADE button pressed, turn on the Q10 Pro.
5. Q10 Pro will show the Android 7 coloured circle upgrade logo.
6. When you see the coloured circle upgrade logo you can release the restore button.
7. A progress bar will indicate update progress. Do not turn box off or use the box/remote during update!
8. When update is complete the box will automatically reboot.
9. First boot will take 3-5 minutes. The box will reboot into Android 5.1 firmware version 1.0.8. Allow boot to complete.

Download: http://www.mediafire.com/file/v1a1sm1fei9by9n/HIMEDIA_Q10_PRO_DOWNGRADE_FROM_ANDROID_7_TO_ANDROID_5.1.zip

[futeko.com]

A change from firmware 2.0.0 is that there is now no need to install a migration firmware then a second final firmware to go from Android 5.1 to Android 7.

The upgrade from Android 5.1 to Android 7 is now done by one single upgrade.

As with all Q5/Q10 Pro firmware, whilst the upgrade can be done via box settings, we recommend a full reinstall according to our instructions using the UPGRADE/RESTORE buttons for best results.

[futeko.com]

Download links added.

[safcsat]

So far so good.

Full flash using method above to be safe.  Fast and smooth process.

Bug where it wasn't keeping my colour space settings is sorted, nice! Will keep testing and report back.

[target5]

hi when i i try to install on my q10 pro the android guy comes up with a red triangel and the install stops
im on android 7 and want to install the new one

[manley]

Update fine, video looks good. When I started KOdi and went into its settings to check everything ok a message said new Kodi version available, is it ok to update Kodi or best to leave it?

[Bedi]

First impressions are positive on my Q10 Pro.
Disappointments:
- Netflix still crashes every time I hit the back button. I was really hoping this would be fixed.
- Bitdefender antivirus also now suddenly crashes (didn't use to) when applying permissions

[saj2001ind]

can we have different mirror for the download...this one is too slow

[target5]

hi when i i try to install on my q10 pro the android guy comes up with a red triangel and the install stops
im on android 7 and want to install the new one

got it to work now :-D

just one problem the audio drops out every 30 sek

[futeko.com]

got it to work now :-D

just one problem the audio drops out every 30 sek

From what source? What player? What is your setup?

[futeko.com]

Update fine, video looks good. When I started KOdi and went into its settings to check everything ok a message said new Kodi version available, is it ok to update Kodi or best to leave it?

OK to update. It's standard Kodi.

You may need to reinstall wrapper after new Kodi install. Go My Apps - Wrapper - Set wrapper player.

[Bedi]

First impressions are positive on my Q10 Pro.
Disappointments:
- Netflix still crashes every time I hit the back button. I was really hoping this would be fixed.
- Bitdefender antivirus also now suddenly crashes (didn't use to) when applying permissions

- Kodi Krypton came pre-installed with this update. Wrapper doesn't work and crashes.

[Grifone1893]

Very disappointed!

Resolution bug still here (if I set 2160p, after reboot, swirch itself to 1080p).
No fixes on subtitles that disappear when timing is too close.

I think I will give the last chance to this "machine" with fw 1.09 and then Iwill move away from himedia.

[ceaca]

Very disappointed!

Resolution bug still here (if I set 2160p, after reboot, swirch itself to 1080p).
No fixes on subtitles that disappear when timing is too close.

I think I will give the last chance to this "machine" with fw 1.09 and then Iwill move away from himedia.

  you are wright.