HDR passthrough via AVR

[cuongdd]

Hi!
My setup as below:
Q10 pro -->avr X520bt -->sony 49x800h
All used hdmi connection.
Can get audio passthrough from q10 to avr.
But can ot get hdr on tv.
Here is avr spec:
The perfect combination of high performance and high value, the Denon AVR-X520BT delivers superb sonic fidelity along with a host of advanced features that includes compatibility with the latest HDMI specification, along with the latest HDCP 2.2 specification that’s required for 4K Ultra HD copy-protected content. The video section features 5 HDMI inputs, 3 of which feature 4K Ultra HD/60 Hz full frame rate and 4:4:4 Pure Color sub-sampling pass-through for the ultimate home theater experience.
Will this spec support HDR passthrough to tv?
Thanks!

[cuongdd]

I set video output as YcBcr420 10bits, and scripts hdmi infor show ycbcr420 10 bits too!

[cuongdd]

Output infor:
sed: using fallback suid method
Formt/DispMode :3840*2160_60/2D
sed: using fallback suid method
sed: using fallback suid method
sed: using fallback suid method
fps: 23.976
DeepColorMode : 30 SpdInfoEnable : NO
OutColorSpace : YCbCr420 MpegInfoEnable : NO
ColorSpaceAdapt: NO DeepColorAdapt : NO
------------------------------------------------------------------------
sed: using fallback suid method
----------------------Hisilicon AVPLAY0 Out Info-------------------
Stream Type :ES |DmxId :INVALID
CurStatus :PLAY |OverflowProc :RESET
Sync ID :sync00 |ThreadID :5643
AudThreadScheTimeOut :0 |AudThreadExeTimeOut :3
VidThreadScheTimeOut :0 |VidThreadExeTimeOut :1
CpuFreqScheTimeCnt :0
------------------------------VID CHANNEL--------------------------
Vid Enable :TRUE |Vdec Type :HEVC
VidOverflowNum :0 |Vdec Mode :NORMAL
VidPid :0x1fff |FrcEnable :TRUE
FrcInRate :24.0 |FrcOutRate :60.0
TplaySpeed :1.0 |LowDelayEnable :FALSE
TvpEnable :FALSE |Vdec ID :vdec00
FrameChanID :vpss_port0000->win0100(master)
AcquireFrame(Try/OK) :5117/1277
SendFrame(Try/OK) :3163/3163(master)
------------------------------------------------------------------------
------------------------------------------------------------------------
sed: using fallback suid method
HDMI Status :UserSetMode(AUTO) DataFormat(TRUEHD)
sed: using fallback suid method
SPDIF Status :UserSetMode(PCM) DataFormat(PCM)
sed: using fallback suid method
DAC0: Status(start), Mute(off), Vol(5), TrackMode(STEREO), AefBypass(off), DelayComps(0ms)
============================== VDEC0 ================================
Work State : RUN
VpssID : vpss00
VfmwID : vfmw00
Codec ID : HEVC(0x24)
Mode : NORMAL
Priority : 15
ErrCover : 0
OrderOutput : 0
CtrlOption* : 0x0
Capability : NORMAL/2160P(2)/H264
Dynamic Frame Store : Enable
Secure Codec : FALSE
OMX Tunneled-Playback Mode : Close
Lowdelay : 0
-------------------Dynamic Frame Store Information--------------------
Dynamic Frame Store Mode : Self
DFS config Frame Number : 0
DFS Extra Frame Number : 6
DFS Delay Time(ms) : 0
DFS Max Mem Use(byte) : 0xfa00000
DFS Memory PhyAddress : 0x0
DFS Memory Length(byte) : 0
--------------------------Stream Information--------------------------
Source : User2
StreamSize(Total/Current) : 0xace4ca9/0xce2cc
BitRate(bps) : 26728736
LumaBitdepth : 10
ChromaBitdepth : 10
StreamBufferSize(Total/Used/Persent): 0x1400000/0xce2cc/4%
--------------------------Picture Information-------------------------
Width*Height : 3840*2072
Stride(Y/C) : 0xf00/0xf00
FrameRate(fps) : Real(23.98) FrameInfo(24000)
PlayFormat : OTHER(86)
FrmPackingType : 2D
Aspect(User/Decode) : 0:0/0:1
FieldMode : Frame
Type : Progressive
YUVFormat : UNKNOWN
TopFirst : TRUE
ErrFrame : 0
TypeNum(I/P) : 0/1291
FrameBuffer Range : [0x0,0x0]
VP6 Picture Reversed : NO

DMX/USER->VDEC
GetStreamBuffer(Try/OK) : 1348/1348
PutStreamBuffer(Try/OK) : 1348/1348
VDEC->VFMW
AcquireStream(Try/OK) : 8006/1348
ReleaseStream(Try/OK) : 1344/1344
VFMW->VPSS
AcquireFrame(Try/OK) : 1378/1291
ReleaseFrame(Try/OK) : 1285/1285
VPSS->AVPLAY
AcquireFrame(Try/OK) : 5173/1291
ReleaseFrame(Try/OK) : 1285/1285
--------------------------Other Information-------------------------
SrcFrmType : HDR10
FullRangeFlag : 0
ColourPrimaries : 9
MatrixCoeffs : 9
TransferCharacteristics : 16
bMasteringAvailable : 1
DisplayPrimaries_x : (13250, 7500, 34000)
DisplayPrimaries_y : (34500, 3000, 16000)
WhitePoint : (15635, 16450)
MaxDisplayMasteringLuminance : 10000000
MinDisplayMasteringLuminance : 50
MaxContentLightLevel : 0
MaxPicAverageLightLevel : 0
=======================================================================

VDEC VERSION :2017042200
MaskCtrlWord :0
VdecSavePath :/mnt
VdecRawChanNum :-1
VdecYuvChanNum :-1
SpeclalFrmNum :0
VdecEopEnable :0

================== param in () is not necessary ==================
echo dat0 dat1 dat2 > /proc/msp/vdec_ctrl
echo savestream handle (path) -- turn on/off raw save
echo saverpu handle (path) -- turn on/off rpu save
echo saveyuv handle (path) -- turn on/off yuv save
echo saveoneyuv handle (path) -- turn on/off oneyuv save
echo maskdfs on/off -- enable/disable mask dynamic fs
echo maskcmp on/off -- enable/disable mask compress
echo setfps handle fps -- set frame rate
echo setEopEnable on/off -- enable/disable EOP function
===================================================================
^CTerminate batch job (Y/N)?