UK BASED ∙ UK STOCK ∙ ESTABLISHED 2010
2 YEAR WARRANTY ∙ FAST DELIVERY
EXPERT TECHNICAL SUPPORT
08-OCT INTRODUCING UGOOS AM9 PRO   22-SEP ZIDOO 8K FIRMWARE 1.3.45   08-SEP INSTALL COREELEC ON UGOOS SK4 PRO   4-AUG R_VOLUTION FIRMWARE 260804_0926_r24
This forum was closed in October 2025 in response to sustained DDOS type attacks. It has been left up read-only to allow access to support information and downloads. Thanks to all the users who contributed over the years.
« previous next »
Pages: [1]

Author Topic: Q10 Pro - NO VIDEO SIGNAL - A big problem!  (Read 5157 times)

Markus

  • Newbie
  • *
  • Posts: 18
Q10 Pro - NO VIDEO SIGNAL - A big problem!
« on: January 05, 2019, 06:44:58 PM »
Hello, Happy New year to all....  :-*

But now, I have a big problem with my Q10 Pro!

When I switch on it, on my TV have no signal.

It's connected by HDMI port, the TV works good
and the Q10 seems to boot correct (do the same rumors) but I'm not sure about that!!!

I tried to connect to a PC by USB3 and the HDD works good...

Never change about setting or firmware from long time!

The only unusual thing happened some evening ago, whwn there where
two blackouts for circuits problems in the office, but really the Q10 Pro
was connected to a power supply with overvoltage protection!

What could have happened?
What other tests can I do to understand what's wrong?

I also tried to connect it to a monitor, but had the same respons: no signal

In the photo you can see the message when I tryed to connect the Q10 Pro to a PC monitor

Many thanks in advance!
Logged

HUHA

  • Newbie
  • *
  • Posts: 6
Re: Q10 Pro - NO VIDEO SIGNAL - A big problem!
« Reply #1 on: January 05, 2019, 08:39:50 PM »
Test with a different hdmi cable ?
Logged

Markus

  • Newbie
  • *
  • Posts: 18
Re: Q10 Pro - NO VIDEO SIGNAL - A big problem!
« Reply #2 on: January 06, 2019, 03:38:25 PM »
Tried, but nothing changed!!!

Many thanks  ;)

Quote from: HUHA on January 05, 2019, 08:39:50 PM
Test with a different hdmi cable ?
Logged

Joker

  • Full Member
  • **
  • Posts: 79
Re: Q10 Pro - NO VIDEO SIGNAL - A big problem!
« Reply #3 on: January 07, 2019, 01:13:08 AM »
It sounds suspiciously like the power black outs may have caused an issue! One never knows how good the power boards protection is until you experience a surge. Were there any indicators on the board to show it had been triggered?

You could try connecting an RCA video cable to see if you can get a picture (providing your TV has RCA input jacks).
Logged

futeko.com

  • Administrator
  • Senior Member
  • *****
  • Posts: 4657
Re: Q10 Pro - NO VIDEO SIGNAL - A big problem!
« Reply #4 on: January 07, 2019, 10:03:05 AM »
Try with RCA cable if possible.

If not then box might be in HDMI mode your TV doesn't understand (accidental pressing of 'TV Mode' button on remote). Boot box, and go through a press tv mode, wait 5 seconds, press tv mode cycle a few times to cycle through HDMI modes.
Logged

Markus

  • Newbie
  • *
  • Posts: 18
Re: Q10 Pro - NO VIDEO SIGNAL - A big problem!
« Reply #5 on: January 07, 2019, 06:09:46 PM »
With RCA cable it works...
It display Himedia!!!  :) But it does not go further than that  :( :( :(

Quote from: futeko.com on January 07, 2019, 10:03:05 AM
Try with RCA cable if possible.

If not then box might be in HDMI mode your TV doesn't understand (accidental pressing of 'TV Mode' button on remote). Boot box, and go through a press tv mode, wait 5 seconds, press tv mode cycle a few times to cycle through HDMI modes.
Logged

Markus

  • Newbie
  • *
  • Posts: 18
Re: Q10 Pro - NO VIDEO SIGNAL - A big problem!
« Reply #6 on: January 07, 2019, 06:47:06 PM »
I'm gogin to try a reset, pressing the reset button located on the back of the box!!!  :o :o :o

Logged
Pages: [1]
« previous next »
 

DELIVERY PAYMENT WARRANTY+RETURNS INTERNATIONAL TAX NEWS OLD FORUM ABOUT PRIVACY CONTACT
© SDHDIGITAL LTD 2026
SITEMAP