Q5 IR Remote Control Code

[Griffith400]

Hi folks,

I plan to use my new Himedia Q5 via a Denon AVR. The Amp acts as the main Audio/Video Hub and therefore it replaces the Remote Controls for the other devices and the Denon Remote can be programmed with the relevant device Remote Control codes.

However, the Denon manuals don't list any Himedia devices so wondered if anybody knew what the Remote Control Code would be?
(I wouldn't be surprised if the Himedia Remote is a 'generic' one used for other products/manufacturers).

For the benefit of SWMBO, I'd rather not have to explain yet another controller so want to automate and control it from the Denon Controller but need the relevant Controller Code!

Appreciate anyone's advice!

Steve.

[pcristi]

•   <key value="0xaa55ef10" name="KEY_DOWN"     />
•   <key value="0xf807ef10" name="KEY_LEFT"     />
•   <key value="0xfe01ef10" name="KEY_RIGHT"     />
•   <key value="0xbe41ef10" name="KEY_ENTER"     />
•   <key value="0xff00ef10" name="KEY_BACK"     />
•   <key value="0xfa05ef10" name="KEY_MENU"     />
•   <key value="0xa25def10" name="KEY_POWER"     />
•   <key value="0xb946ef10" name="KEY_HOME"     />
•   <key value="0xe817ef10" name="KEY_VOLUMEUP"     />
•   <key value="0xec13ef10" name="KEY_VOLUMEDOWN"     />
•   <key value="0xa857ef10" name="KEY_MUTE"     />
•   <key value="0xaf50ef10" name="KEY_1"     />
•   <key value="0xad52ef10" name="KEY_2"     />
•   <key value="0xef10ef10" name="KEY_3"     />
•   <key value="0xb34cef10" name="KEY_4"     />
•   <key value="0xb54aef10" name="KEY_5"     />
•   <key value="0xee11ef10" name="KEY_6"     />
•   <key value="0xf00fef10" name="KEY_7"     />
•   <key value="0xb14eef10" name="KEY_8"     />
•   <key value="0xf20def10" name="KEY_9"     />
•   <key value="0xb04fef10" name="KEY_0"     />
•   <key value="0xea15ef10" name="KEY_PAGEDOWN"     />
•   <key value="0xeb14ef10" name="KEY_PAGEUP"     />
•   <key value="0xa05fef10" name="KEY_TV_MODE"     />
•   <key value="0xa55aef10" name="KEY_MOUSE"     />
•   <key value="0xa15eef10" name="KEY_BACKSPACE"     />
•   <key value="0xae51ef10" name="KEY_3D"     />

source

[Griffith400]

Thanks for the reply pcristi.

However, I was after the short 5 digit industry recognised remote control codes. i.e. I use the Panasonic code 10051 to program both my SKY controller to operate the telly and also program my Denon AVR controller with the same code to operate the TV from that.

My hope is to be able to set my Denon Remote with this code so it operates the Himedia Box directly.

Steve.