OFFICIAL Q10 PRO FIRMWARE. FUTEKO. HMD-2.0.4 2017-07-05

[afss]

I just tried a 3D ISO and noticed that subtitles do not show in 3D as they should  - is this a new issue or something known ?

[q10pro1]

fw 2.0.4

 Fine installation not 100%. It reaches 90%, 95% ends and restarts
it's normal?

Ps modality installation with reset button

it's normal ? futeko
thank you

Have you put the actual update.zip on the flash drive from the downloaded archive and not the archive you downloaded? Check the zip file you are putting on the USB stick.

Is this
Downloaded from this site
Q10 PRO FIRMWARE. FUTEKO. HMD-2.0.4 2017-07-05.174159. Q10 PRO MUST HAVE ANDROID 7 VERSION 2.0.3 INSTALLED BEFORE INSTALLING THIS FIRMWARE

[usul]

Here is my thoughts on new 2.04 firmware...

Im coming from 2.01 as had too many issues with 2.03..

So far I think this firmware is awesome. And best I have used... Was worth the wait...

I use emby server over a gigabit network using kodi 17.3 and wrapper with emby kodi addon.

All my 4k, 3d mvc ISO, mkv, etc, all play smooth, no stuttering..

My 4k files are over 100Mbps and play perfect...
Emby is set to use smb direct for streaming..

Picture quality has improved, and sound also it seems...

I can now use all hardware acceleration in kodi for addons in kodi... And now all video plays without freezing and stuttering..
With previous firmware, had to turn off one of the hardware accelerator to get non studdering  video with addons..

Awesome...

Also seems 3d mvc 24fps ISO now play perfect... (limited testing, but so far so good).

Interface overall seems snapper and now hdr works great.....

Im a happy... Well done..

Just wish we had auto resolution switching...
So if watching 1080p files, it outputs 1080p. And if 4k, changes to 4k output...

Im using high end gear, with a projector, and everything seems to work nicer now...

Thanks

Could you please explain why do you need emby server ? Why not just samba or nfs share within your local network ?
what is the benefit of emby ?

Thanks

I have 3 himedia q10 pro thru house..
So all access same movie files from my nas..
So any changes I make on nas, they all sync and reflect changes..

Also with emby android app, I can edit movie info on the go, and it will all sync when I'm back at home..

Slick system...

[usul]

Hi, since 2.04, I can't find my NAS (synology 1813+), through media centre LAN or Kodi.
Media Centre - LAN - Auto search : "No Server"
I have tried installing 2.04 custom firmware with same result.
But via ES File Explorer, it can find my network (NAS).

I didn't have this issue with 2.03 and before.

Please help..

And how can I re-install 2.03 ? Currently I'm on 2.04 Custom Firmware.
I have tried re-install 2.04, downgrade to 5 first, etc, not success....

I had this issue on 2.01 also..

Easy fix...

Don't use auto...

Use manual..
Enter the ip address etc, and it will work...

It doesn't work. It always say "Query is error".
Really stressfull..

Just to check..

Did you enter correct ip addresses and share name..

You can confirm address on windows computer under under its sharing info.. To make sure...

I don't use password etc so onky enter ip, share name and leave user /password blank..

[q10pro1]

reinstalled
fw 2.0.1  80% and reboot   HIMADIA
fw 2.0.3  80 % and reboot  HIMADIA
fw  2.0.4 80% and reboot   HIMADIA
All installations with the reset button method
reboot q10  with fw number exact,
How is it possible that the installation of the fw Never ends up 100%?

[dukunmagic]

Hi, since 2.04, I can't find my NAS (synology 1813+), through media centre LAN or Kodi.
Media Centre - LAN - Auto search : "No Server"
I have tried installing 2.04 custom firmware with same result.
But via ES File Explorer, it can find my network (NAS).

I didn't have this issue with 2.03 and before.

Please help..

And how can I re-install 2.03 ? Currently I'm on 2.04 Custom Firmware.
I have tried re-install 2.04, downgrade to 5 first, etc, not success....

I had this issue on 2.01 also..

Easy fix...

Don't use auto...

Use manual..
Enter the ip address etc, and it will work...

It doesn't work. It always say "Query is error".
Really stressfull..

Just to check..

Did you enter correct ip addresses and share name..

You can confirm address on windows computer under under its sharing info.. To make sure...

I don't use password etc so onky enter ip, share name and leave user /password blank..

Yes, of course, I have manually entered everything correctly.
I've done these before & it worked.
But now, when I finished key in, it says LAN has stopped working, but when I check, the shortcut is created.
When I click the shortcut however, it says "Query is error".

I have been trying to re-flash the firmware, but not success..
When I power on, it shows the error android (slept android with red ! sign on it).

rrggghhhhhh...

[mccainm]

Hi, since 2.04, I can't find my NAS (synology 1813+), through media centre LAN or Kodi.
Media Centre - LAN - Auto search : "No Server"
I have tried installing 2.04 custom firmware with same result.
But via ES File Explorer, it can find my network (NAS).

I didn't have this issue with 2.03 and before.

Please help..

And how can I re-install 2.03 ? Currently I'm on 2.04 Custom Firmware.
I have tried re-install 2.04, downgrade to 5 first, etc, not success....

I had this issue on 2.01 also..

Easy fix...

Don't use auto...

Use manual..
Enter the ip address etc, and it will work...

It doesn't work. It always say "Query is error".
Really stressfull..

Just to check..

Did you enter correct ip addresses and share name..

You can confirm address on windows computer under under its sharing info.. To make sure...

I don't use password etc so onky enter ip, share name and leave user /password blank..

Yes, of course, I have manually entered everything correctly.
I've done these before & it worked.
But now, when I finished key in, it says LAN has stopped working, but when I check, the shortcut is created.
When I click the shortcut however, it says "Query is error".

I have been trying to re-flash the firmware, but not success..
When I power on, it shows the error android (slept android with red ! sign on it).

rrggghhhhhh...

I'm having a similar problem, except mine never worked on any of the 2.0.x firmware...worked fine in the 1.0.X versions.  I have an external drive hooked up to the back of a Linksys EA9500.  I can access the drive using ES File Manager.  I haven't tried Kodi but when I try to add shortcut under Media Center I can get to the server...using Auto Search or Manual...and it can actually find the shared folder I want.  When I select it, however, all I get is a "Network error.  check network state" error message.  I'm not sure what the problem is or an alternative way to access.  I'd like to be able to access the network drive using HiMedia Media Center...not just ES File Manager.  Any advice would be appreciated.  Thanks.

[futeko.com]

I just tried a 3D ISO and noticed that subtitles do not show in 3D as they should  - is this a new issue or something known ?

Please more details.

[futeko.com]

reinstalled
fw 2.0.1  80% and reboot   HIMADIA
fw 2.0.3  80 % and reboot  HIMADIA
fw  2.0.4 80% and reboot   HIMADIA
All installations with the reset button method
reboot q10  with fw number exact,
How is it possible that the installation of the fw Never ends up 100%?

Is the firmware installing correctly?

If it does then I don't think whether the firmware install progress bar reaches 100% matter much.

[q10pro1]

reinstalled
fw 2.0.1  80% and reboot   HIMADIA
fw 2.0.3  80 % and reboot  HIMADIA
fw  2.0.4 80% and reboot   HIMADIA
All installations with the reset button method
reboot q10  with fw number exact,
How is it possible that the installation of the fw Never ends up 100%?

Is the firmware installing correctly?

If it does then I don't think whether the firmware install progress bar reaches 100% matter much.

I had android 5.1 i went to fw 2.0.4
Using this procedure
  If you are installing from a 5.1 firmware firmware on Android you must install first official 2.0.1, then official 2.0.3 (because 2.0.3 can not be installed directly from Android 5.1) then 2.0.4.
- 2.0.4 can be installed directly on custom CS 2.0.3 folding.

what do I have to do ?

[futeko.com]

what do I have to do ?

I don't understand what you're asking.

[q10pro1]

what do I have to do ?

I don't understand what you're asking.

Fw does not install 100%
what do I have to do?

[futeko.com]

Fw does not install 100%
what do I have to do?

What does 'Fw does not install 100%' mean?

Do you just mean that the progress bar doesn't get all the way to the right before rebooting?

Or is there something wrong with the firmware after you've installed it?

If the firmware installs correctly it doesn't matter if the bar doesn't reach the end.

[q10pro1]

Fw does not install 100%
what do I have to do?

What does 'Fw does not install 100%' mean?

Do you just mean that the progress bar doesn't get all the way to the right before rebooting?

Or is there something wrong with the firmware after you've installed it?

If the firmware installs correctly it doesn't matter if the bar doesn't reach the end.

After installation I have instability problems
The Q10 does not keep date and time, kodi does not keep libraries
And Q 10 does not come out of kodi
I wonder if these problems are because the fw does not install 100% or anything else

[futeko.com]

After installation I have instability problems
The Q10 does not keep date and time, kodi does not keep libraries
And Q 10 does not come out of kodi
I wonder if these problems are because the fw does not install 100% or anything else

It is normal for the progress bar during firmware update to not get all the way across. If the box reboots into the new firmware then the install is 100% complete. Q10 Pro does not keep time between reboots, it gets the time from the internet on each boot. Not sure about Kodi not keeping libraries and Kodi instability.

The cleanest 2.0.4 firmware reinstall you can do is to go 2.0.1 > 2.0.3 > 2.0.4. This will give you an 'as new' system.