This Kodi add-on gives full auto framerate switching (output same as source) for Kodi internal video player.
THIS ADDON IS ONLY FOR KODI INTERNAL PLAYER (DVDPlayer/VideoPlayer). Q5/Q10 Pro have auto-switching pre-installed for Android HiMediaPlayer and Kodi+wrapper.
Original forum thread: http://www.android-mediaplayer.de/index.php/Thread/3483-Kodi-ADDON-Frequency-Switcher-Autoframerate-detection/
From version 3.4.2 onwards you must install the Kodi repo to receive updates. See installation instructions below.
What works:Video Output | HDMI output 720p | HDMI output 1080p | HDMI output 2160p (3840x2160 - Ultra-HD) |
25/50 | 50Hz | 50Hz | 50Hz |
30/60 | 60Hz | 60Hz | 60Hz |
23.976 | not support, no switch | 23,976 hz | 23,976 hz |
24 | not support, no switch | 24 hz | 24 hz |
29.970 | 59.940hz | 29.970 hz | 29.970 hz |
59.940 | 59.940hz | 59.940 hz | 60 hz (firmware not support 2160p at 59.940 hz) |
What does not work:- HD Audio
- Full 3D ISO(MVC)
- 2D ISO
Credit:- jk-nz Developer from Minix (http://www.minixforum.com/threads/autoframerate-detection-switching-output-in-xbmc.601/)
- pcristi
- looun
Installation InstructionsStep 0:
- Backup kodi (db, fan art, ecc) ,if necessary
Step 1:
- download Looun Add-on repository and copy to Q5/Q10 Pro: https://github.com/looun/Kodi-Repository/blob/master/repository.looun.ropo/repository.looun.ropo-1.0.0.zip?raw=true
In KODI:
- System
- addon...
- Install from zip file
- select the repository.looun.ropo-1.0.0.zip file
Step 2.
ONLY NECESSARY IF RUNNING ANY OFFICIAL ANDROID 7 OR PCRISTI CUSTOM VERSION 2.0.0 FIRMWARE.
NOT NECESSARY IF RUNNING PCRISTI CUSTOM FIRMWARE 2.0.1 OR LATER.
- IF RUNNING ANDROID 5.1 IGNORE THIS STEP.
- REQUIRES WINDOWS PC ON SAME NETWORK AS Q5/Q10 PRO.
- Download to Windows PC: http://www.mediafire.com/file/y93ugaxs9nrbek0/Workaround_Kodi_add-on_autoFMTswitch_1.0.2%28experimental_only_Android_7.0%29.rar
- Unzip
- Execute RUN_ME.bat at command prompt
- Insert Q5/Q10 Pro IP address
- Select option 1 to install. Q5/Q10 Pro will reboot.
- Changelog:
1.0.2
- improve for f/w 2.0.3 Android 7.0
- 3D autoswitch base on filename (http://kodi.wiki/view/3D)
1.0.1
- improvements
1.0.0
- initial releaseStep 3:
In KODI:
- Program
- addon...
- Install Hi-Frequency Switcher
Step 4:
- go to HI Frequency Switcher addon
- select "Service"
- ENABLE Playbacks Stars
- ENABLE Default 60 hz or 50 hz
- now "Save configuration"
- exit and restart kodi
Step 5:
- use button "Copy default Map Keys" to enable suggested buttons map for better kodi experince
- use "players" button to enable playerback with kodi(dvdplayer) internal player for 2D video.
Version Historyv 3.5.9.3
- quick fix HiMedia FW v2.0.4
v 3.5.9.2
- small fix
v 3.5.9.1
- fix regression Andoid 5.1.1
v 3.5.9
- improve for f/w 2.0.3 Android 7.0
- part fix for SPMC after updated Phyton 31032017
v 3.5.8
- add 3D autoswitch base on filename (http://kodi.wiki/view/3D)
(only if install with run_me.bat)
v 3.5.7
- fix not switch for add-on in Kodi v17.0
v 3.5.6
- fix overwrite workaround Android 7.0 f/w
v 3.5.5
- fix DialogNotification Kodi v17.0
v 3.5.4
- remove from video add-on category
- corected map key prev/next channel, chapter using pagedown/pageup remote buttons
v 3.5.3
- fix Players button label
v 3.5.3
- fix button label
3.5.2
- download from repository with auto-update
3.5.1
- add button to copy key map
- add button to copy playercorefactory.xml
- fix mpeg2 play with dvdplayer
- add preliminary support Kodi 17
- fix nfs , http not suport wrapper SPMC/Kodi 16.1
3.5
- add service set mode 23.97 hz, 24 hz on playback stop
3.4.2
- fix compatibility with SPMC
3.4.1
- new logo
3.4
- compatibility with old Q5/Q10 4K 3D , only h.264 720/1080 Hardware decoding work
if not work do a clean instaliation with last firmware 3.0.3
3.3.3
- HiPQTools key map for PQSetting pop-up windows gr_haha
3.3.2
- bug fix
- NEW debug info with system infromation
3.3
- addon compatibility with SPMC
3.2
- fix UHD issues
3.0 beta
- add support for UHD resolution
2.1
- add support for: 23,976, 29.970, 59.940
1.0
- first release