Q10 PRO FIRMWARE. ANDROID 7. FUTEKO. HMD-2.0.1 2017-01-10.164949
THIS FIRMWARE IS FOR INTERNATIONAL/EUROPEAN HIMEDIA Q10 PRO ONLY.
DO NOT TRY AND FLASH IT TO CHINESE HARDWARE Q10 PRO OR PREVIOUS GENERATION Q10 4K3D.
YOU WILL LOSE ALL USER INSTALLED APPS AND SETTINGS! PLEASE BACK UP BEFORE UPDATING (Kodi backup: http://kodi.wiki/view/backup).
Changelog:
1. Recent Key out of operation issue fixed
2. Some HDDs unrecognizable issue fixed
3. Samba copy at low speed issue fixed
4. Video playback fastward buffering issue fixed
5. Bluetooth auto enable after turn off issue fixed
6. Certain applications unable to install issue fixed
7. Wrapper unable to playback the videos in NFS issue fixed
8. Support KODI 17.0
9. Airplay support for IOS10.2
10. Default support widevine L3
11. HDMI compatibility improved
12. Advanced setting descriptions optimized
13. Wifi handling capacity improved
14. Key touch-tone has been turned off
THERE ARE DIFFERENT FIRMWARE DOWNLOADS DEPENDING ON WHICH FIRMWARE (ANDROID 5.1 or ANDROID 7) IS CURRENTLY INSTALLED.
INSTALL THE CORRECT UPGRADE FIRMWARE FOR YOUR CURRENTLY INSTALLED ANDROID VERSION.
INSTALLING THE INCORRECT VERSION COULD BRICK YOUR Q10 PRO
Instructions if Android 7 (firmware version 2.0.0 and later) currently installed on Q10 Pro
1. Extract update.zip (using an unzip program like 7zip, winzip etc) from Q10_PRO_FIRMWARE._ANDROID_7_TO_ANDROID_7._FUTEKO._HMD-2.0.1_2017-01-10.164949._Q10_PRO_MUST_ALREADY_BE_RUNNING_ANDROID_7_TO_INSTALL_THIS_FIRMWARE.zip to the root of a FAT32 formatted USB pen drive. (the USB pen drive should contain a single file called 'update.zip').
2. Insert the USB pen drive into any USB port of Q10 Pro.
3. With Q10 Pro turned off, use a paper clip or pen to press and hold the the pinhole UPGRADE button on the back of Q10 Pro (next to the power port).
4. While keeping the UPGRADE button pressed, turn on the Q10 Pro.
5. Q10 Pro will show the Android 7 coloured circle upgrade logo.
6. When you see the coloured circle upgrade logo you can release the restore button.
7. A progress bar will indicate update progress. Do not turn box off or use the box/remote during update!
8. When update is complete the box will automatically reboot.
9. First boot will take 3-5 minutes. The box will reboot into new Android 7 firmware. Allow boot to complete.
Download: http://www.mediafire.com/file/n0dbl6vgut3h7gy/Q10_PRO_FIRMWARE._ANDROID_7_TO_ANDROID_7._FUTEKO._HMD-2.0.1_2017-01-10.164949._Q10_PRO_MUST_ALREADY_BE_RUNNING_ANDROID_7_TO_INSTALL_THIS_FIRMWARE.zip
Instructions if Android 5.1 (firmware version 1.0.1 - 1.1.0) currently installed on Q10 Pro
1. Extract update.zip (using an unzip program like 7zip, winzip etc) from Q10_PRO_FIRMWARE._ANDROID_5.1_TO_ANDROID_7._FUTEKO._HMD-2.0.1_2017-01-10.164949._Q10_PRO_MUST_BE_RUNNING_ANDROID_5.1_TO_INSTALL_THIS_FIRMWARE.zip to the root of a FAT32 formatted USB pen drive. (the USB pen drive should contain a single file called 'update.zip').
2. Insert the USB pen drive into any USB port of Q10 Pro.
3. With Q10 Pro turned off, use a paper clip or pen to press and hold the the pinhole UPGRADE button on the back of Q10 Pro (next to the power port).
4. While keeping the UPGRADE button pressed, turn on the Q10 Pro.
5. Q10 Pro will show the Android 5.1 green droid upgrade logo.
6. When you see the Android 5.1 green droid logo you can release the restore button.
7. A progress bar will indicate update progress. Do not turn box off or use the box/remote during update!
8. When update is complete the box will automatically reboot.
9. First boot will take 3-5 minutes. The box will reboot into new Android 7 firmware. Allow boot to complete.
Download: http://www.mediafire.com/file/5vkw8rvc8l8681i/Q10_PRO_FIRMWARE._ANDROID_5.1_TO_ANDROID_7._FUTEKO._HMD-2.0.1_2017-01-10.164949._Q10_PRO_MUST_BE_RUNNING_ANDROID_5.1_TO_INSTALL_THIS_FIRMWARE.zip