Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - napapon 365

Pages: [1]

Egreat A11, A10, A5 / Multi Channel LPCM Output Through HDMI

« on: January 18, 2019, 11:52:31 AM »

Hi My name is Napapon
My old Q10, not the latest version, is having issues after so many years in service. I'm now searching for a replacement. My AV receiver is outdated already but it is still working. It only supports AC3 and DTS decoding as well as multi channel LPCM input so I'm looking for a media player that can decode DTS:MA for example or AAC multi channel and output the audio in multi channel LPCM format. The old Q10 is not capable of doing this, not sure about the new Q10 pro. I'm thinking of the Egreat A5 as a replacement since the A10 is too expensive for me, else I'm probably going for the new Q10 since I like the internal hdd slot. Thanks.

HiMedia Q10 Pro, Q5 Pro / Re: How to disable Audio Description ?

« on: January 18, 2019, 11:44:14 AM »

Quote from: napapon 365 on October 18, 2018, 01:49:45 PM

Hi there My name is Napapon
In some of my full bluray tear, when I played Atmos music down to the stereo using an inbuilt media player (which I liked Kodi), the audio track also had a soundtrack track the only way. I have found to avoid this problem. To select a 660kb / s Dolby Digital track is available anywhere in the media player settings or elsewhere where the audio description track can be disabled when sounds thanks ?

HiMedia Q5/Q10 4K3D (2014 Generation) / Q5 4K switches to 4:3 instead of maintaining 16:9 and causes powertrips

« on: December 19, 2018, 02:01:14 PM »

Hi there My name is Napapon
I recently upgraded my TV to a 4K one and proceeded to change the Q5 resolution to 2160p30. But this resolution seems to output 4:3 format when I restarts the box.

I have no problem with 1080p for many months, just 2160. Anyone has this problem too? I bought my box from taobao so I believe it is a China set. Also, it occasionally causes powertrips when I power on.

My TV automatically detects the output from Q4 as 4:3 although I can force the TV to show 16:9 under Q5 2160 resolution but I think it is not solving the root cause of the issue.

Anyone knows why 1080 can maintain 16:9 but 2160 can't? Has it got anything to do with the refresh rate? Thanks in advance.
??ufabet

HiMedia Q10 Pro, Q5 Pro / high bitrate pausing

« on: December 10, 2018, 11:24:30 AM »

Hi there My name is Napapon
rebuilt network, i have ts-873 qnap(amd ryzen) nas with 10gbe switch, i have the himedia q5 pro on same switch. Everything is working better than it ever has until today, i watched ready player one 4k and the video pauses for a few seconds a few times every so often, i didn't time it. I don't know where to begin, i have all new hardware. Mtu is 1500 across all devices

HiMedia H8 / Hishare remote app not finding my Oct core

« on: December 01, 2018, 04:01:21 PM »

Hi there My name is Napapon
I have been trying to get the hishare app to work with my Oct core, but it cannot find the unit. I have been using the wukong app and like most of it. Unfortunately, I don't speak Chinese so I don't understand all of the functions. I also would like to have a function that gives me a full keyboard in the app. Wukong only gives me a numeric keypad.
???UFABET

Does anyone have a solution to get the hishare app to find my Oct core?

HiMedia Q10 Pro, Q5 Pro / google drive as network drive

« on: November 24, 2018, 12:54:33 PM »

Hi there My name Napapon
Please help me to find out the way I can add Google Drive as network drive to play media files with MediaCenter! /Himedia Q10 Pro/
Thanks in advance!

HiMedia Q5/Q10 4K3D (2014 Generation) / Q10 4K3D Advanced Network Setting ... ?

« on: November 05, 2018, 06:46:15 AM »

Hi there My name is Napapon

There's the possibility to change some Lan Advanced option such set MTU to 9000 (jumbo Frame) ?

Sorry for my poor english .... My LAN is based over Gigabit Switch that support LACP and Jumbo Frames. I'd like that Q10 connect to my sinology Nas as fast as possible ... Sinology is connected over 4 Nic aggregated (From/To imac-sinology today i can transfer approx 6Gb in 1 minute) but Q10 is slow , very slow !
I've thinked to try Jumbo Fr. but i don't know the way to set this in Q10 ... Any suggestion

Other question ... Q10 can use Eth and Wifi at the same time ? (example: Eth over Vlan 10 and Wifi over Vlan20) so in Vlan10 i can connect to Nas and in Vlan 20 i can connect phone or i can use wifi to connect internet ....

Have a nice day, good work !!! ?

Thanks in advance to all !!!

HiMedia Q10 Pro, Q5 Pro / Wrapper not working on multiple Q10 units

« on: October 29, 2018, 08:40:19 AM »

Hi there My name is Napapon
I have three units that have been upgraded to 2.09. All three will not use the wrapper to play files and as a result, I have no pass-through of digital audio. All I can playback is stereo.

I have read these forums (and others) top to bottom and have done the following:
-Uninstalled the wrapper and re-installed it (latest version found on this forum).
-Copied the updated info from Futeko's post into the playerfactory.xml file.
-Disabled and re-enabled the wrapper.
-Switched to Kodi Player and switched back to Wrapper Player in the main interface.
-Connected to the Himedia via Samba shares from my PC as well as via a file manager on the Himedia to edit and verify playerfactory.xml
-Enabled auto start in the wrapper app.
-Factory reset on the player.
-Changed Kodi 17.6 settings for pass-through and enabled 7.1 channel sound (I have a 5.1.2 setup)
-I have read through Futeko's FAQ and I am stumped. Role back to 2.08 makes no difference.

If I use the built-in media player it works perfectly but then I lose the library functions of Kodi.
I have an Apple TV4 which works with 5.1 / Atmos (IOS12 Beta) so it is not my amp or speaker config etc. ?

An interesting thing I have found is that when I initially went to /sdcard/Android/data/org.xbmc.kodi/files/.kodi/userdata/ there was no playercorefactory.xml in the folder. This was the case even after uninstalling and re-installing the wrapper.

Am I forgetting something?

Thanks in advance.

HiMedia Q5/Q10 4K3D (2014 Generation) / Enabling H265/HEVC 10bit video playback in Kodi 15.2

« on: October 24, 2018, 01:15:43 PM »

Hi there My name is Napapon
I've got a Q5 4K3D Himedia with firmware 3.0.3 installed and Kodi 15.2. My problem is that Kodi don't support HEVC 10bit video playback (with HEVC/H265 8bit video no problem, everything works fine). Anyone knows if there is a way to enable HEVC 10bit video playback in Kodi 15.2 ? Or any other way I can solve this problem ? ?

Thanks in advance

HiMedia Q10 Pro, Q5 Pro / How to disable Audio Description ?

« on: October 18, 2018, 01:49:45 PM »

Hi there My name is Napapon
In some of my full bluray tear, when I played Atmos music down to the stereo using an inbuilt media player (which I liked Kodi), the audio track also had a soundtrack track the only way. I have found to avoid this problem. To select a 660kb / s Dolby Digital track is available anywhere in the media player settings or elsewhere where the audio description track can be disabled when sounds thanks ?

Pages: [1]