futeko.com FORUM
Product Support => HiMedia Q5/Q10 4K3D => Topic started by: ziofire on April 12, 2016, 11:55:00 PM
-
??? Hi Everybody !!!
There's the possibility to change some Lan Advanced option such set MTU to 9000 (jumbo Frame) ?
Sorry for my poor english .... My LAN is based over Gigabit Switch that support LACP and Jumbo Frames. I'd like that Q10 connect to my sinology Nas as fast as possible ... Sinology is connected over 4 Nic aggregated (From/To imac-sinology today i can transfer approx 6Gb in 1 minute) but Q10 is slow , very slow !
I've thinked to try Jumbo Fr. but i don't know the way to set this in Q10 ... Any suggestion ???
Other question ... Q10 can use Eth and Wifi at the same time ? (example: Eth over Vlan 10 and Wifi over Vlan20) so in Vlan10 i can connect to Nas and in Vlan 20 i can connect phone or i can use wifi to connect internet ....
Have a nice day, good work !!!
Thanks in advance to all !!!
-
??? Hi Everybody !!!
There's the possibility to change some Lan Advanced option such set MTU to 9000 (jumbo Frame) ?
Sorry for my poor english .... My LAN is based over Gigabit Switch that support LACP and Jumbo Frames. I'd like that Q10 connect to my sinology Nas as fast as possible ... Sinology is connected over 4 Nic aggregated (From/To imac-sinology today i can transfer approx 6Gb in 1 minute) but Q10 is slow , very slow !
I've thinked to try Jumbo Fr. but i don't know the way to set this in Q10 ... Any suggestion ???
Other question ... Q10 can use Eth and Wifi at the same time ? (example: Eth over Vlan 10 and Wifi over Vlan20) so in Vlan10 i can connect to Nas and in Vlan 20 i can connect phone or i can use wifi to connect internet ....
Have a nice day, good work !!!
Thanks in advance to all !!!
hisilicon Hi3798C V100 not have native support of SATA port.
Q10 limitation is USB<> SATA onboard adapter, usually you can copy file at 20-30 mb/s not more ( USB 2.0 bandwidth ).