futeko.com FORUM
Product Support => Zidoo Z1000 Pro, Z10 Pro, Z9X => Topic started by: sleeper52 on October 21, 2022, 05:04:31 AM
-
Just got a Z9X. Specs in my signature. I managed to share my media via SMB from my TrueNAS server (version 13.0-U2). All files correctly scraped and plays. My issue is when I'm playing 4K remuxed files (regardless if it's HDR10 or DV), I am getting stuttering where the video and audio freezes and my Yamaha receiver also momentarily says it lost the audio signal. This mostly happens on large 4k remuxed files at longer stutter intervals (~5 secs) but only occasionally happens on remuxed 1080p files at shorter intervals (~2 seconds). Non-remuxed files (~7 Gig) work flawlessly.
My setup is all wired via gigabit ethernet. I have tested the connection speed to the server via my own local OpenSpeedTest docker container and I am getting ~1Gbps download/upload. My HDMI cables are Zeskit rated v2.1. I have turned off the Z9X WiFi and it's server function.
I previously used a HTPC running Plex/Kodi and it would play 4K remuxed files flawlessly but I bought the Z9X for Dolby Vision. I used the same ethernet cables for the Z9X.
-
Z9X is capable of playing all 4K via SMB Gigabit LAN. It sounds like a bandwidth problem, either the network or the HDMI chain.
The one thing unusual in your listed setup is the HDMI splitter to the AVR. The usual way to connect Z9X would be Z9X > HMDI > AVR > HDMI > TV. If you set it up this way (or remove the AVR) does it cure the stuttering?
-
I have tested the ethernet cable and it does measure 1Gbps upload/download.
I am using the HDMI splitter because the receiver is old and does not handle 4k HDR or Atmos/DTS-X.
I will try to run the Z9X directly to the TV and see how it goes.