futeko.com FORUM

Product Support => Dune HD Max Vision, Pro Vision Solo, Real Vision 4K => Topic started by: yaksung on April 03, 2022, 08:50:53 AM

Title: No Audio Output From The Alternate HDMI audio (only) channel
Post by: yaksung on April 03, 2022, 08:50:53 AM

I connected my Yamaha AVR to the alternate HDMI audio only channel. But no audio signal been received by my Yamaha AVR. Any bother can advise what is the setting to be done to Pro Vision 4K Solo. Thank you

Title: Re: No Audio Output From The Alternate HDMI audio (only) channel
Post by: carlpea on April 03, 2022, 03:01:48 PM

What is this setting set to?

(https://www.avsforum.com/attachments/1646483753200-png.3248998/)

Title: Re: No Audio Output From The Alternate HDMI audio (only) channel
Post by: Mike-UK on April 20, 2022, 05:03:44 PM

if your AVR is cable of decoding Atmos and the newer codecs then change digital audio output mode to original (bitstream) as you want your AVR to do audio decoding and not the dune, also make sure your avr is selecting the correct hdmi so if you plug dune to avr sat make sure you select sat on your avr