futeko.com FORUM
Product Support => Dune HD Max Vision, Pro Vision Solo, Real Vision 4K => Topic started by: andys on November 21, 2021, 08:15:11 PM
-
it is possible to configure time remaining on the display :(
-
No. :-X
-
it should be reported to the Dune,is an important setting :-\
-
Asked by many already.
-
another problem, how to put the smaller writing..
on android configurations I have not found
-
another problem, how to put the smaller writing..
on android configurations I have not found
Changing the font of what? Menu, Subtitles ???
-
I meant by the menu list
-
Never tried myself but the font type and size can be changed in Setup somewhere. Seen it for sure.
-
it is possible to configure time remaining on the display :(
Yes, you can.
The two attached files either enable or disable this feature.
They can be run from a USB drive.
-
it is possible to configure time remaining on the display :(
Yes, you can.
The two attached files either enable or disable this feature.
They can be run from a USB drive.
Knowing Dune this is a trial implementation. It may have side effects or not work as it should yet.
But installed it myself and the DSF's work on my Real Vision (4-digit small display) for both Movies and Music.
Next FW version will most likely include it.
@andys which model Dune do you own? Already tried the DSF?
-
where is this entry to change?
Thank you
-
where is this entry to change?
Thank you
You need to download and next run the enable DSF (Dune Software Fix).
-
both installed, but where is this DSF function :-\
-
Dune HD Pro Vision 4K Solo
-
Installing both is a bad idea. Run enable to activate it and run disable to deactivate. That is how it works.
If it works no need to run disable at all. It will stay active then. Just play a movie or a music title.
-
it doesn't work for me
-
it doesn't work for me
Works fine on my Dune HD Pro Vision 4K Solo.
(https://i.imgur.com/qadaU1H.jpg)
-
on the display
-
on the display
Scroll to the right...
-
@carlpea
Thanks' for this convincing confirmation. ;)
Removed my erroneous comment on "not working" accordingly.
-
@carlpea
Thanks' for this convincing confirmation. ;)
Removed my erroneous comment on "not working" accordingly.
Could be firmware related.
I'm on 211031_0532_r18
-
Could be firmware related.
I'm on 211031_0532_r18
indeed asked myself that question too. I am using also the most recent R18/
-
on the display
Scroll to the right...
Hello. What do you mean by scrolling to the right? With what button?
From the info option activated as in the photo? It does not work for me.
I have the 210804_0531_r18
Thanks.
-
on the display
Scroll to the right...
Hello. What do you mean by scrolling to the right? With what button?
From the info option activated as in the photo? It does not work for me.
I have the 210804_0531_r18
Thanks.
Scroll to the right as in the image is larger than the forum width limit!
You aren't on the latest firmware.
http://files4.dune-hd.com/tmp/alpha/dune_firmware_tv175v_211031_0532_r18.dff
You must run the 'dune_service_show_remaining_time_enable.dsf' file I attached in an earlier post.
-
we talk about this display
https://ibb.co/SwfR1dn (https://ibb.co/SwfR1dn)
-
we talk about this display
https://ibb.co/SwfR1dn (https://ibb.co/SwfR1dn)
Yes?
(https://i.imgur.com/NSScMpu.png)
(https://i.imgur.com/MORWhhT.png)
-
we talk about this display
https://ibb.co/SwfR1dn (https://ibb.co/SwfR1dn)
Yes?
(https://i.imgur.com/NSScMpu.png)
yes
-
we talk about this display
https://ibb.co/SwfR1dn (https://ibb.co/SwfR1dn)
Yes?
(https://i.imgur.com/NSScMpu.png)
yes
Well it does work.
-
it does not work in the remaining time
-
it does not work in the remaining time
The images I posted prove it works?
-
it doesn't work for me
-
it doesn't work for me
Are you on the latest firmware I linked to?
-
dune_firmware_tv175v_210415_1106_r17.dff
-
dune_firmware_tv175v_210415_1106_r17.dff
So that's a no then...
-
it doesn't work for me with this firmware..
with the r18 alpfa does it work?
-
on the display
Scroll to the right...
Hello. What do you mean by scrolling to the right? With what button?
From the info option activated as in the photo? It does not work for me.
I have the 210804_0531_r18
Thanks.
Scroll to the right as in the image is larger than the forum width limit!
You aren't on the latest firmware.
http://files4.dune-hd.com/tmp/alpha/dune_firmware_tv175v_211031_0532_r18.dff
You must run the 'dune_service_show_remaining_time_enable.dsf' file I attached in an earlier post.
installed, with this it works ... thanks ;D
-
Well we got there in the end!
:)
-
the first time I installed it it rebooted me
-
you know where to zoom out on the list movie?
-
on the display
Scroll to the right...
Hello. What do you mean by scrolling to the right? With what button?
From the info option activated as in the photo? It does not work for me.
I have the 210804_0531_r18
Thanks.
Scroll to the right as in the image is larger than the forum width limit!
You aren't on the latest firmware.
http://files4.dune-hd.com/tmp/alpha/dune_firmware_tv175v_211031_0532_r18.dff
You must run the 'dune_service_show_remaining_time_enable.dsf' file I attached in an earlier post.
I had already seen the full photo. By saying "scroll right" I understood that you meant pressing an option with the remote control. If the solution is to run one mode or another from a USB, I prefer to wait for the final firmware. Thanks also.
-
you know where to zoom out on the list movie?
I don't use the new layout.
I reverted back in the settings.
-
this normal is found in android system
-
this firmware 211031_0532_r18: it has power problems, are two times that I reboot
-
this firmware 211031_0532_r18: it has power problems, are two times that I reboot
Playing MKV with ASS/SSA subtitles maybe?
-
with overscan...I closed
-
Does the time remaining function work for BDMV folders as well as MKV?
-
Yes and also for Music but not with BD Full Menu yet for obvious reasons. That player can't be changed that easily as it is driven by Java menus.
-
it is possible to configure time remaining on the display :(
Yes, you can.
The two attached files either enable or disable this feature.
They can be run from a USB drive.
Hello again,
Is it mandatory to always activate these files from usb or can they be saved in a directory in the Dune?
-
They can be run from any storage location.
-
They can be run from any storage location.
Tks monkey!
-
They can be run from any storage location.
Tks monkey!
The enable file only needs running once as well. You don't need to run it each time you turn on the device!
-
Yes and also for Music but not with BD Full Menu yet for obvious reasons. That player can't be changed that easily as it is driven by Java menus.
Well Zidoo have apparently achieved this so I live in hope Dune can too.
-
They can be run from any storage location.
Tks monkey!
The enable file only needs running once as well. You don't need to run it each time you turn on the device!
Yes, it's true
-
Yes and also for Music but not with BD Full Menu yet for obvious reasons. That player can't be changed that easily as it is driven by Java menus.
Well Zidoo have apparently achieved this so I live in hope Dune can too.
also egreat and himedia,had all three
-
Hi guys , I can confirm that running the file for enabling the remaining time on main display works on a Dune Pro Vision Solo with the latest r17 alpha release. I avoided the R18 as there are some reports for random hangs on this firmware.
-
Can someone tell me that with Dune Max Vision 4k I can see "Remaining Time" on the front display?
Maybe I'll buy a Max Vision, but I'm not sure yet.
I got this email last year for Vision Solo
Received on June 26th, 2021, with approval for the upcoming Max version. It's been six months. It's annoying.
That means a promise from Dune with something later, lasts at least 1 year?
Annoying extremely annoying.
"Hello ........,
Here is a release candidate for the new public beta FW, we maybe will publish it soon, you can check it:
http://files.dune-hd.com/tmp/dune_firmware_tv175v_210625_1453_r17.dff
It is a small update (without New GUI).
It includes mostly further improvements/fixes for various media playback issues. Change Log will be available later.
It also includes a preliminary implementation of "Show Remaining Time" feature, run the following DSF files to enable/disable it:
http://files.dune-hd.com/tmp/dune_service_show_remaining_time_enable.dsf
http://files.dune-hd.com/tmp/dune_service_show_remaining_time_disable.dsf
Limitations: currently only for Pro Vision 4K Solo and Real Vision 4K models (models which have simple front display), will not affect Blu-ray menu mode (will affect only file playback and Blu-ray Lite mode).
A more complete solution (with support for all other models including models with OLED display and support for Blu-ray menu mode) will become available a bit later."
-
I would love to have the remaining time too! The display is useless without it! I read there is a way but not sure!