futeko.com FORUM

Product Support => Venz V3 => Topic started by: futeko.com on January 08, 2016, 12:02:50 PM

Title: How to recover Venz V3
Post by: futeko.com on January 08, 2016, 12:02:50 PM

If your V3 boots to the Android recovery menu (could be caused by bad add-on install or other corruption) then the following instructions will allow you to recover it.

1. Download this .zip file: http://www.mediafire.com/download/euwc0661ta1i20l/OpenELEC-TLBB.V3b.arm-6.0.0-update.zip
2. Copy .zip file to root of USB stick and insert USB stick into any USB port on V3. So USB stick should have one file named 'OpenELEC-TLBB.V3b.arm-6.0.0-update.zip'.
3. From Android recovery menu choose 'install from EXT' then USB.
4. You should see the .zip file you downloaded. Select it.
5. The update should progress with various messages until you see a message saying that install has completed.
6. Select reboot from recovery menu.

After completing this process to get a booting V3, we would recommend connecting to a network and performing an update to latest firmware as stickied in our forum (http://www.futeko.com/newforum/index.php?board=11.0).

Title: Re: How to recover Venz V3
Post by: maninblack on April 27, 2016, 10:38:41 PM

hi
I have file but I cannot get to "update" folder my v3 is stuck on recovery screen
tried reset cleared cache etc still the same have you file to repair please?
thanks

Title: Re: How to recover Venz V3
Post by: futeko.com on April 28, 2016, 09:00:56 AM

You don't need to get to an update folder.

From recovery choose 'install from ext' then USB. You should see the .zip file and be able to select it for installation.

Title: Re: How to recover Venz V3
Post by: Commundert on November 02, 2017, 06:44:35 AM

ld see the .zip file and be able to se