futeko.com FORUM

Product Support => Dune HD Max Vision, Pro Vision Solo, Real Vision 4K => Topic started by: lucabellomi on March 06, 2021, 03:49:48 PM

Title: dune pro vision 4k solo: network is not working
Post by: lucabellomi on March 06, 2021, 03:49:48 PM
the dune is not seen on the net and the green LED lights up only for a few seconds when switched on, and then goes off. Has it arrived broken or is it a common problem?
Thanks
Title: Re: dune pro vision 4k solo: network is not working
Post by: carlpea on March 06, 2021, 09:00:27 PM
Sounds broken.
Title: Re: dune pro vision 4k solo: network is not working
Post by: lucabellomi on March 07, 2021, 10:45:59 PM
but to the owners of Pro Vision 4K Solo, the 2 LEDs (yellow and green) both light up or only the yellow lights up?
thank you
Title: Re: dune pro vision 4k solo: network is not working
Post by: futeko.com on March 08, 2021, 11:39:29 AM
I also get green light only lighting up for a couple of seconds on boot then yellow light flickering during usage as would be expected. I think, in that respect, your box is behaving normally.

When you say 'the dune is not seen on the net' do you mean no network access at all or just that other devices on the network cannot see the dune?

If it's the latter then SMB server needs to be enabled at Setup - Applications - SMB Server
Title: Re: dune pro vision 4k solo: network is not working
Post by: Nico54 on March 08, 2021, 06:34:03 PM
I think I also have a problem with my network. Although I have no problems with my network connection, I post my question here anyway.

I have a question about the speed of transferring files from the PC to the Dune HD Pro Vision Solo.

When transferring files (movies), I can only reach a speed of about 50 MB / s. With my Egreat A10 I get about 80 MB / s. Both players are connected to the same wired network.

Firmware version: dune_firmware_tv175v_210227_1631_r17

Is this correct?
Title: Re: dune pro vision 4k solo: network is not working
Post by: futeko.com on March 09, 2021, 11:45:33 AM
I think I also have a problem with my network. Although I have no problems with my network connection, I post my question here anyway.

I have a question about the speed of transferring files from the PC to the Dune HD Pro Vision Solo.

When transferring files (movies), I can only reach a speed of about 50 MB / s. With my Egreat A10 I get about 80 MB / s. Both players are connected to the same wired network.

Firmware version: dune_firmware_tv175v_210227_1631_r17

Is this correct?

I don't think it's a hardware problem if that's what you mean. It appears to be typical.

Dune will work to optimise file transfer speeds but it's not going to be a problem in normal use. UHD BD has a max bitrate of 100 Mb/s, which is 12.5 MB/s.
Title: Re: dune pro vision 4k solo: network is not working
Post by: lucabellomi on March 10, 2021, 01:25:13 PM
When you say 'the dune is not seen on the net' do you mean no network access at all or just that other devices on the network cannot see the dune?

I created a new subnet with another Netgear router and now I can "see" the Dune. I think it was a problem with the Vodafone router.
Thank you
the maximum speed, however, remains at 50/55 mb / s, too bad ...
Title: Re: dune pro vision 4k solo: network is not working
Post by: elduendevera on March 26, 2021, 07:00:07 PM
Hello, I do not know if this will help ... Formatting the internal hard disk to EXTFAT I manage to copy at 69 mb / s