futeko.com FORUM
Product Support => HiMedia Q5/Q10 4K3D => Topic started by: futeko.com on December 30, 2015, 10:06:54 AM
-
Q10 4K3D. 14-DEC-2015. FIRMWARE HMD-3.0.3 FUTEKO-EN.
Internal build number: HMD-3.0.3 2015-12-14.092330
IMPORTANT! THIS FIRMWARE IS FOR EUROPEAN Q10 4K3D (MANUFACTURED AFTER NOVEMBER 2014) ONLY. DO NOT TRY AND FLASH IT TO OTHER REGION Q10 4K3D.
Installation Instructions:
1. Extract update.zip from the download archive (using an unzip app like 7zip, Winzip etc) to the root of a USB pen drive. (the USB pen drive should contain a single file called 'update.zip').
2. Insert the USB pen drive into any USB port of the Q10 4K3D.
3. With the Q10 4K3D turned off, use a paper clip or pen to press and hold the the pinhole restore button on the side of the Q10 4K3D (next to the USB ports).
4. While keeping the restore button pressed, turn on the Q10 4K3D.
5. The Q10 4K3D will show an Android droid logo and proceed to upgrade the firmware.
6. The box will auto-reboot when finished.
Q10 4K3D. 14-DEC-2015. FIRMWARE HMD-3.0.3 FUTEKO-EN Changelog:
1. Can set the browsed picture as wallpaper
2. Can set default subtitle and default audio track
3. Solve the issue of filelist disorder in the Media Center
4. Optimize the UI of the Media Center
5. Add function of copy, rename, erase in the File Manager
6. In My Apps optimize loadtime, support mouse scroll wheel operation
7. Optimize the info display in the Ethernet Settings
8. Other general performance improvements
9. Nav bar pull up instead of hover auto-hide.
Download link: http://www.mediafire.com/file/qdx1t4yp7kgzsj9/Q10_4K3D._14-DEC-2015._FIRMWARE_HMD-3.0.3_FUTEKO-EN.zip
-
..
-
According to changelog there is no option to remove the navbar?!? Really?
-
According to changelog there is no option to remove the navbar?!? Really?
There is no navbar.
-
Is it totally removed? AHOY THEN!
Thanks for your kind efforts, you made it possible :)
I will install when I get home.
-
Hello Futeko,
Try this new firmware and never have problem to update but this time at the beginning the update stard normaly and then stop and put "ERROR" and the Himedia continu with starting as nothing happend and start as a normal reboot, So are you sure that this firmware work ? Thanks for your return.
-
Installed and no navbar! :)
Now if only someone could take a look at my thread about my HDD not being recognised and see if they could help me out...
-
Installed and no navbar! :)
Now if only someone could take a look at my thread about my HDD not being recognised and see if they could help me out...
About your HDD, just remove it and reconnect it, that's all.
-
I've tried that but no luck.
Probably best to keep on topic in this thread.
-
Installed and no navbar! :)
Now if only someone could take a look at my thread about my HDD not being recognised and see if they could help me out...
I have some terrible news.
The navbar is in fact still there..!
Instead of popping up when hovering with mouse it can be accessed by moving mouse to bottom of screen and click and dragging up.
Actually a good non-intrusive way of providing access to it.
-
Installed and no navbar! :)
Now if only someone could take a look at my thread about my HDD not being recognised and see if they could help me out...
I have some terrible news.
The navbar is in fact still there..!
Instead of popping up when hovering with mouse it can be accessed by moving mouse to bottom of screen and click and dragging up.
Actually a good non-intrusive way of providing access to it.
Looks like they implemented the patch that does this exactly. I am using it as it is. I will upgrade this weekend :)
But if they implement a setting for disabling entirely is a good option though. Because it is totally useless IMHO.
-
My friend got this box with 3.03 12-14 firmware already installed. I was wondering what is the cause why every time he boots up the box and kodi is setup to default app, it took for about a minute to load with kodi running. Is it normal that it will load up first the home screen and stays there for about 10 to 15 seconds before it will run the kodi? I have 3.01 firmware and loading with kodi I never see the home screen when booting up the default app and it only took 35 secs with kodi already running
-
3.0.3 does take a little longer to boot.
If you're happy with 3.0.1 there's no reason not to use it.
-
3.0.3 does take a little longer to boot.
If you're happy with 3.0.1 there's no reason not to use it.
How about home screen first before lunching the default app? Is this also part of the new update?
-
We purchase the Q5 in bulk and would like to create a re-branded version of the hicontrol or handsetformultiscreen app. Do you have an unsigned version we can work with to rebrand and distribute? How can we work on this?
-
You should email HiMedia. export@himedia.cn
-
Link is dead :(
-
Link is dead :(
Fixed.
-
Hi I have a Q10 and I'm trying to update it with the software here and it's not working. I followed the instructions, when I press the upgrade button and power on the Q10 the green Andriod appears for a few minutes and the device reset. no changes. I currently have Andriod 5.1.1 and build 1.0.9. I tried the migration download from 5.1 to 7. I tried 1.09, and 2.0.1. nothing works.
-
Hi I have a Q10 and I'm trying to update it with the software here and it's not working. I followed the instructions, when I press the upgrade button and power on the Q10 the green Andriod appears for a few minutes and the device reset. no changes. I currently have Andriod 5.1.1 and build 1.0.9. I tried the migration download from 5.1 to 7. I tried 1.09, and 2.0.1. nothing works.
You have a Q10 Pro. See here: https://www.futeko.com/newforum/index.php?board=14.0
-
need firmware for q10 4k3d china hardware
Q10 4K3D. 14-DEC-2015. FIRMWARE HMD-3.0.3 FUTEKO-EN.
Internal build number: HMD-3.0.3 2015-12-14.092330
IMPORTANT! THIS FIRMWARE IS FOR EUROPEAN Q10 4K3D (MANUFACTURED AFTER NOVEMBER 2014) ONLY. DO NOT TRY AND FLASH IT TO OTHER REGION Q10 4K3D.
Installation Instructions:
1. Extract update.zip from the download archive (using an unzip app like 7zip, Winzip etc) to the root of a USB pen drive. (the USB pen drive should contain a single file called 'update.zip').
2. Insert the USB pen drive into any USB port of the Q10 4K3D.
3. With the Q10 4K3D turned off, use a paper clip or pen to press and hold the the pinhole restore button on the side of the Q10 4K3D (next to the USB ports).
4. While keeping the restore button pressed, turn on the Q10 4K3D.
5. The Q10 4K3D will show an Android droid logo and proceed to upgrade the firmware.
6. The box will auto-reboot when finished.
Q10 4K3D. 14-DEC-2015. FIRMWARE HMD-3.0.3 FUTEKO-EN Changelog:
1. Can set the browsed picture as wallpaper
2. Can set default subtitle and default audio track
3. Solve the issue of filelist disorder in the Media Center
4. Optimize the UI of the Media Center
5. Add function of copy, rename, erase in the File Manager
6. In My Apps optimize loadtime, support mouse scroll wheel operation
7. Optimize the info display in the Ethernet Settings
8. Other general performance improvements
9. Nav bar pull up instead of hover auto-hide.
Download link: http://www.mediafire.com/file/qdx1t4yp7kgzsj9/Q10_4K3D._14-DEC-2015._FIRMWARE_HMD-3.0.3_FUTEKO-EN.zip