futeko.com FORUM

Product Support => HiMedia Q10 Pro, Q5 Pro => Topic started by: dapro on May 20, 2019, 06:27:40 AM

Title: Automatically set the resolution on Himedia Q10 Pro
Post by: dapro on May 20, 2019, 06:27:40 AM

Good Morning

I own the himedia q10 pro, with the firmware 2.1.0
My question is, I stream my movies on my Synology from himedia to kodi 17.6. Everything OK. Only what do I have to adjust, which also automatically detects the system, whether a 1080p Blue Ray is running or a 4K? If I put on the Himedia resolution to 2160 / 24hz run the 4K course without problems, but the 1080p movies are synonymous in 2160/24
Conversely, it is the same. If I set the Himedia to 1080p / 60, the Blue Ray's HD in the 1080/24 is ok, but then the 4K's also run in the 1080p.

How can you recognize this automatically in the himedia?
 
Request for help and support.

Thank you

Sorry for my english

Title: Re: Automatically set the resolution on Himedia Q10 Pro
Post by: Mount81 on May 21, 2019, 07:21:15 AM

There is an unofficial patch for this (see the FAQ thread). However because odd previous experiences I don't use it and also would recommend to others to rather not, but it' your choice.  This auto-res switching seems that will never be officially solved on these Boxes. So i still recommend manual switching, or stuck with UHD res and just let the Box upscale FHD videos.

I also recommend to set the GUI to UHD / 30Hz and the Advanced Settings to 444 / 10bit (and of course turn ON the 24Hz mode). That's the only way you can get the best possible PQ on a UHD display.

(Hope HiMedia will fix this latter colorspace bug in the upcoming FW).

Title: Re: Automatically set the resolution on Himedia Q10 Pro
Post by: dapro on May 22, 2019, 01:27:10 PM

Thank you for the Information.