futeko.com FORUM
Old Product Support => HiMedia Q10 Pro, Q5 Pro => Topic started by: chrisfunkdoc on July 22, 2017, 11:37:07 AM
-
Hello, I'm after some help with the upgrade process.
I'm currently on 2.0.0 and am trying to upgrade to 2.0.1 so I can upgrade further. I downloaded the file from the Futeko forum, extracted to a fat32 usb stick so only 'update.zip' is on the drive.
Powered off, inserted usb, pressed and held reset button on the back and powered on. I released reset when the circle appeared and waited for the progress bar.
But it never appeared, it just reboots and resets my box to factory settings, still on 2.0.0. I tried through the GUI and get the android for a split second but it, again, just reboots back into factory reset state on 2.0.0
Thanks
Chris
-
Hello, I'm after some help with the upgrade process.
I'm currently on 2.0.0 and am trying to upgrade to 2.0.1 so I can upgrade further. I downloaded the file from the Futeko forum, extracted to a fat32 usb stick so only 'update.zip' is on the drive.
Powered off, inserted usb, pressed and held reset button on the back and powered on. I released reset when the circle appeared and waited for the progress bar.
But it never appeared, it just reboots and resets my box to factory settings, still on 2.0.0. I tried through the GUI and get the android for a split second but it, again, just reboots back into factory reset state on 2.0.0
Thanks
Chris
From 2.0.0 you can upgrade to 2.0.3 instantly.
-
Same thing happens! I've tried 2 different usb drives and 2 different computers, SD card nothing will work. Anymore ideas?
-
If you insert the USB stick while the box is normally running (after it boots) can you access it?
-
Through the included file manager? Yes
-
Have you tried upgrade with the settings app?
Settings - upgrade - local upgrade
You can also try upgrade online, the first install of 2.03 I made was with that method.
-
I tried the local upgrade and got the same result. It does now appear to be working, I have a SD card in a usb reader, but I also have it in a different usb port on the Q10 (the blue port). So one of these changes appears to have worked, I will try and upgrade to 2.0.4 using a usb stick in the blue port to see if this works.