(http://www.futeko.com/productimages/MP068-1.jpg) | (http://www.futeko.com/productimages/MP067-1.jpg) | Q10 Pro + Q5 Pro Seperate downloads for Q10 and Q5 Pro. Make sure you select the correct one for your machine. Read the instructions carefully. |
I have freeze box when shutdown by Power menu, any one have same problem?
This already had the last Custom Firmare.
It seems, that nobody is interessted in it... ;)I have freeze box when shutdown by Power menu, any one have same problem?
Got the same
Feedback are welcome.
@Alter_Schwede62 you got answer on freeze Minix PowerMenu
http://www.futeko.com/newforum/index.php?topic=908.msg5635#msg5635
@Fa.Ch, @Lucklack
Shutdown --> HiMedia(hisilicon) box stack SDK implementation problem.
Sleep -- Shutdown
Restart --> Restart
Could you modify the powerbar as follows : remove shutdown, change sleep to Shutdown and keep Restart to restart
Then was : Restart and shutdown, thanks!Feedback are welcome.
@Alter_Schwede62 you got answer on freeze Minix PowerMenu
http://www.futeko.com/newforum/index.php?topic=908.msg5635#msg5635
@Fa.Ch, @Lucklack
Shutdown --> HiMedia(hisilicon) box stack SDK implementation problem.
Sleep -- Shutdown
Restart --> Restart
@Lucklack like you requested
PowerMenu(noroot) mod for HMD (http://www.mediafire.com/?x30f95cqybztpjq)
(http://www.mediafire.com/convkey/b00d/rg7f567hz4ghrj7zg.jpg?size_id=5)
1 Download update_PowerMenu(noroot)_mod_HMD.zip
http://www.mediafire.com/download/x30f95cqybztpjq/update_PowerMenu%28noroot%29_mod_HMD.zip
2 Rename update_PowerMenu(noroot)_mod_HMD.zip to update.zip
3 Copy update.zip to /sdcard/update.zip via ES Explorer / samba share / etc or just put on root of USB/HDD attached device
4 Follow normal Menu update process: - Setting/System upgrade/ Local Upgrade/Please Choose Drive: Ex: C for /sdcard/update.zip
5 Q10Pro will show an Android droid logo and proceed update.zip file.
This process is not wipe data, for safety reason please backup all your important information.
If any one need just Apk PowerMenu(noroot).apk (http://www.mediafire.com/?ozlck8hpxw851og).Could you modify the powerbar as follows : remove shutdown, change sleep to Shutdown and keep Restart to restart
Then was : Restart and shutdown, thanks!Feedback are welcome.
@Alter_Schwede62 you got answer on freeze Minix PowerMenu
http://www.futeko.com/newforum/index.php?topic=908.msg5635#msg5635
@Fa.Ch, @Lucklack
Shutdown --> HiMedia(hisilicon) box stack SDK implementation problem.
Sleep -- Shutdown
Restart --> Restart
Can I just flash it over the current firmware?
@Lucklack like you requested
PowerMenu(noroot) mod for HMD (http://www.mediafire.com/?x30f95cqybztpjq)
(http://www.mediafire.com/convkey/b00d/rg7f567hz4ghrj7zg.jpg?size_id=5)
1 Download update_PowerMenu(noroot)_mod_HMD.zip
http://www.mediafire.com/download/x30f95cqybztpjq/update_PowerMenu%28noroot%29_mod_HMD.zip
2 Rename update_PowerMenu(noroot)_mod_HMD.zip to update.zip
3 Copy update.zip to /sdcard/update.zip via ES Explorer / samba share / etc or just put on root of USB/HDD attached device
4 Follow normal Menu update process: - Setting/System upgrade/ Local Upgrade/Please Choose Drive: Ex: C for /sdcard/update.zip
5 Q10Pro will show an Android droid logo and proceed update.zip file.
This process is not wipe data, for safety reason please backup all your important information.
If any one need just Apk PowerMenu(noroot).apk (http://www.mediafire.com/?ozlck8hpxw851og).Could you modify the powerbar as follows : remove shutdown, change sleep to Shutdown and keep Restart to restart
Then was : Restart and shutdown, thanks!Feedback are welcome.
@Alter_Schwede62 you got answer on freeze Minix PowerMenu
http://www.futeko.com/newforum/index.php?topic=908.msg5635#msg5635
@Fa.Ch, @Lucklack
Shutdown --> HiMedia(hisilicon) box stack SDK implementation problem.
Sleep -- Shutdown
Restart --> Restart
It's work for me
thanks
New CS of 1.0.5 is out...
update_Q5Pro_(update&themed)_HMD-1.0.5 2016-07-11.120420
update_Q10Pro_(update&themed)_HMD-1.0.5 2016-07-07.151525
http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__54
https://www.mediafire.com/?kvlryqpyzcac3
New CS of 1.0.5 is out...
update_Q5Pro_(update&themed)_HMD-1.0.5 2016-07-11.120420
update_Q10Pro_(update&themed)_HMD-1.0.5 2016-07-07.151525
http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__54
https://www.mediafire.com/?kvlryqpyzcac3
Where new CS firmware??? (1.0.5!!)
Yes...he moved it...it was there....for q5 and q10...sorry :-[
Its working for me great...i think he will put it back
We need to ask pcristi about it....he only knows the answer
Can I just flash it over the current firmware?
Yes. Over any Q10 Pro firmware, not just CS custom.
Does it mean it works whether your box is direct from China or the International version?
Hello! I tried to ask : update_Q10Pro_ (update & themed ) _HMD - logo appears with android 1.0.5 2016-07-07.151525 write boot and so is repeated every 20 seconds without installing firmwearul and I followed the installation steps exactly will .A idea Please ? Thank you!
While dysplayul write boot on the player on screen with little green logo appears , then appears on the display screen 0000 and on tv . in capital letters : HIMEDIA.peste original image I wanted to put last firmweare CS 1.0.5
boot --> boot active
0000 --> Android recovery active
-- -- -- --> Android OS loading no time info start with HMD 1.0.5 (old FW 08 : 00 : 00)
flash power led red/white is update in process
Update to Custom CS HMD 1.0.5 all process take 16-18 minutes
Boot / power led white / (back screen) --> 5 seconds
0000 / power led white / Android droid logo --> 40 seconds (depends of USB flash speed)
0000 / power led flash red-white / Android droid logo --> 4 minutes
-- -- -- / power led white / HIMEDIA logo --> 10 minutes
time / power led white / Launcher - wait 1-2 minutes to finish user apps to install
Normal boot time
Boot / (back screen) --> 5 seconds
-- -- -- / power led white / HIMEDIA logo --> 20 seconds
time / power led white / Launcher --> 5 seconds (depends application installed)
All times are approximated can vary for you.
What can you do next?
Pcristi,can i upgrade from CS 1.0.5 to CS 1.0.6 in settings -update-usb and have all my settings back,or it will be lost?
Thanks!
is this errore with 1.0.6,or with menu-update-local usb to 1.0.6 procedure?
Thanks
HiMediaVideoPlayer 1.0.6_HMD_0810_Release with working front display
1 Download update_HiMediaVideoPlayer 1.0.6_HMD_0810_Release_with_VFD.zip
http://www.mediafire.com/download/vml18yhlof724lk/update_HiMediaVideoPlayer_1.0.6_HMD_0810_Release_with_VFD.zip
2 Rename update_HiMediaVideoPlayer 1.0.6_HMD_0810_Release_with_VFD.zip to update.zip
3 Copy update.zip to root of USB attached device (don't copy to internal /sdcard can brick box)
4 Check MD5 checksum value for update.zip
MD5: d18389d07c9fbe07b36e8676b887dfb9
Ex: http://www.winmd5.com
5 Follow normal Menu update process: - Setting/System upgrade/ Local Upgrade/Please Choose Drive: Ex: D for sda
6 Q10Pro will show an Android droid logo and proceed update.zip file.
This process is not wipe data, for safety reason please backup all your important information.
HiMediaVideoPlayer 1.0.6_HMD_0810_Release with working front display
1 Download update_HiMediaVideoPlayer 1.0.6_HMD_0810_Release_with_VFD.zip
http://www.mediafire.com/download/vml18yhlof724lk/update_HiMediaVideoPlayer_1.0.6_HMD_0810_Release_with_VFD.zip
2 Rename update_HiMediaVideoPlayer 1.0.6_HMD_0810_Release_with_VFD.zip to update.zip
3 Copy update.zip to root of USB attached device (don't copy to internal /sdcard can brick box)
4 Check MD5 checksum value for update.zip
MD5: d18389d07c9fbe07b36e8676b887dfb9
Ex: http://www.winmd5.com
5 Follow normal Menu update process: - Setting/System upgrade/ Local Upgrade/Please Choose Drive: Ex: D for sda
6 Q10Pro will show an Android droid logo and proceed update.zip file.
This process is not wipe data, for safety reason please backup all your important information.
HiMediaVideoPlayer 1.0.6_HMD_0810_Release with working front display
1 Download update_HiMediaVideoPlayer 1.0.6_HMD_0810_Release_with_VFD.zip
http://www.mediafire.com/download/vml18yhlof724lk/update_HiMediaVideoPlayer_1.0.6_HMD_0810_Release_with_VFD.zip
2 Rename update_HiMediaVideoPlayer 1.0.6_HMD_0810_Release_with_VFD.zip to update.zip
3 Copy update.zip to root of USB attached device (don't copy to internal /sdcard can brick box)
4 Check MD5 checksum value for update.zip
MD5: d18389d07c9fbe07b36e8676b887dfb9
Ex: http://www.winmd5.com
5 Follow normal Menu update process: - Setting/System upgrade/ Local Upgrade/Please Choose Drive: Ex: D for sda
6 Q10Pro will show an Android droid logo and proceed update.zip file.
This process is not wipe data, for safety reason please backup all your important information.
Waiting for new custom 1.0.7 ;D
Waiting for new custom 1.0.7 ;D
I believe pcristi is on a well deserved holiday.
I believe pcristi is on a well deserved holiday.
Any idea when he will be back with custom 1.07?
Besides the above reported errors, there are still annoying typos in HiMedia Player. E.g. "exnternal" instead of "external" or "Poliah" instead of "Polish". C'mon, what the heck is "Poliah" ;-)
The way the language strings are integrated into the app makes this harder to change than you think, but I'll push Himedia to sort it for next firmware. 'exnternal' is particularly annoying.
(UNOFFICIAL) HiMediaVideoPlayer 1.0.6_HMD_0810_Release with fix for exnternal and Poliah
Hi there, is above beta player same as one you posted here (http://www.futeko.com/newforum/index.php?topic=1152.0)? Asking as the two filesizes are different by 1KB. Thx.
Hello Futeko,
why we do not have the fps display with the official version ?
will it be available with the next FW ?
this is not essential but it would be nice to have it anyway :)
Hi there, is above beta player same as one you posted here (http://www.futeko.com/newforum/index.php?topic=1152.0)? Asking as the two filesizes are different by 1KB. Thx.
No.
My beta version is from HiMedia today and is the official version from 1.0.7 + multi-language subtitles.
pcristi's unofficial version in this thread is created by him and is the beta himediaplayer (same as 1.0.7 final but with fps display) + his spelling error corrections.
It's confusing because both have been posted today.
Dummy alert!
So I've downloaded the custom firmware how do I apply it?
Hello Futeko,
why we do not have the fps display with the official version ?
will it be available with the next FW ?
this is not essential but it would be nice to have it anyway :)
Hello Futeko,
why we do not have the fps display with the official version ?
will it be available with the next FW ?
this is not essential but it would be nice to have it anyway :)
Not sure why not but I've requested it be put back into next version with as much other info as possible (ideally as an overlay by keypress like Kodi). The info is there in the background so it should be made available.
adb connect ip_player
adb remount
adb shell rm -R /system/app/Gmail2
adb shell rm -R /system/app/Camera2
adb reboot
Can you make a custom firmware without add some apps such as: Camera, gmail, Camera... Thanks!
adb shell rm -R /system/app/YouTube
adb shell rm -R /system/app/EstrongsFileManager
Question:
Do i have to use the pin-update-method every time i update a custom fw?
I'd like to try one out, but that would mean i'd lose all my settings with every update and would have to start from scratch...
I can not turn off bluetooth. when I turn off device and turn on, bluetooth enable auto. Custom firmware 1.0.7
+1
I test it is happen with official/custom firmware HMD-1.0.5/HMD-1.0.6/HMD-1.0.7.
I don't see this problems with older official/custom firmware HMD-1.0.1/HMD-1.0.3I can not turn off bluetooth. when I turn off device and turn on, bluetooth enable auto. Custom firmware 1.0.7
Is the Kodi supplied with custom firmwares are that of HiMedia version of it or the stock Android version from Google Play?
Also, what is the package named HiPQTools under /system/app/? Is it the Imprex Engine file, can I remove it safely from .zip? If so, does it mean there will be no added effects from this Engine, which I prefer. As I prefer to remove all the Gmail, Browser and other such apps not required from the folder to make the system cleaner, before flashing.
Hi pcristi,
i surfed here, cause i'm interesting to poweroff app.
I see your custom FW, but nothing about new function you introduced to.
Can you give us a small list about what you've modified in your FW vs original FW?
Many thanks!
Hi
This is my first post.
Today i order from Futeko the Himedia Q10 Pro.
He comes with the firmaware 1.07 installed?
Hi
This is my first post.
Today i order from Futeko the Himedia Q10 Pro.
He comes with the firmaware 1.07 installed?
Normaly yes and not the custom one. For the best you must be install the 1.07 custom one ;)
But do i install the custome firmaware at the first use?Or do i need to test the box with the pre installed firmware?
sorry think old bloke here.
I have dl the cs firmware as a zip folder.
Do I just copy the zip folder to the usb and (use paperclip etc upgrade) or doi need to extract it to the USb etc?
sort I am not to clever at this stuff
thank you
The CS firmware looks different to the official firmware (different background, different icons), so if you see no difference then it hasn't installed.Thank you , I will give it a go!
If the update file is named incorrectly or there is a problem with the USB flash drive used for the update then the box will boot to Android logo and do a factory reset. I think this is what has happened in your case.
For CS firmware download the custom firmware (from here: https://www.mediafire.com/?kvlryqpyzcac3), rename the downloaded file to 'update.zip' and copy to the root of a FAT32 formatted USB flash drive.
Really sorry to be a pain.
I have formatted the usb to Fat 32 and also ExFat.
The zip folder was copied to the USB and renamed update.zip
I had the power off and a paperclip in the update hole.
Power on and when I see the robot remove the paperclip.
It goes to Himedia after about 15/20 secs, then fully loads after about 3 mins. No change.
What could I be doing wrong?? at a real loss here. anyhelp again would be really helpful.
cheers
Check if you try firmware Upgrade from Setting/Upgrade/Local Upgrade/ is show "File not found".
If "File not found" is popup open ES File Explorer and check if file name is not update.zip.zip by mistake and rename to update.zip
https://play.google.com/store/search?q=file%20explorer&hl=enReally sorry to be a pain.
I have formatted the usb to Fat 32 and also ExFat.
The zip folder was copied to the USB and renamed update.zip
I had the power off and a paperclip in the update hole.
Power on and when I see the robot remove the paperclip.
It goes to Himedia after about 15/20 secs, then fully loads after about 3 mins. No change.
What could I be doing wrong?? at a real loss here. anyhelp again would be really helpful.
cheers
Remove:
- Android Navigaton Bar - annoying with AirFun.
(enable/disable_navigation_bar_android.zip here (http://"http://www.mediafire.com/?smq92es16jycao3") install with restore button to enable)
Hello, I've just upgraded to the 1.0.7 custom firmware. Everything looks & works great, except on my earlier fw version (1.0.5 I think) there was a navigation bar with some icons at the bottom of the home screen (& others). It's possible I made a change to settings that I've forgotten somewhere, but for the life of me I can't figure out how to get this back & am hoping someone has an idea. Thanks.
Any one can confirm that the 1.0.8 CFW is OK and stable, without any additional bugs?
I would like to also ask if it installs by default with the "white only" icons or with the coloured icons?!
Experimental workaround for Whicons - White IconAfter install Whicons - White Icon form Google Play to activate it are more that 12000 application with white icon.
- install and reboot to active
- uninstall Whicons apps and reboot to inactive
- is not real support for Icon Pack, is just active/inactive prepared icon pack from firmware.
Please support Developer Randle.
Know problem AppManager buggy and popup Do you want to close it? wait/ok after install so just for patient users.
No bugs with cfw. In app manager icons are white, but only default app of firmware.
QuoteExperimental workaround for Whicons - White IconAfter install Whicons - White Icon form Google Play to activate it are more that 12000 application with white icon.
- install and reboot to active
- uninstall Whicons apps and reboot to inactive
- is not real support for Icon Pack, is just active/inactive prepared icon pack from firmware.
Please support Developer Randle.
Know problem AppManager buggy and popup Do you want to close it? wait/ok after install so just for patient users.No bugs with cfw. In app manager icons are white, but only default app of firmware.
It's not rooted and yes, you can root easily following this simple guide: http://www.futeko.com/newforum/index.php?topic=885.0
awesome.... thanks a million
the only reason why i didn't update my box to latest official N. firmware yet is the anticipation of pcristi custom one.
yup.... it's like he's reading our minds and knows what we actually want.... i just hope that in the future he can even dig deep and do some modifications or tweaks to fix the video playback artifacts using the default video player.
the only reason why i didn't update my box to latest official N. firmware yet is the anticipation of pcristi custom one.
yup.... it's like he's reading our minds and knows what we actually want.... i just hope that in the future he can even dig deep and do some modifications or tweaks to fix the video playback artifacts using the default video player.
Wrong way to speak up....
the only reason why i didn't update my box to latest official N. firmware yet is the anticipation of pcristi custom one.
yup.... it's like he's reading our minds and knows what we actually want.... i just hope that in the future he can even dig deep and do some modifications or tweaks to fix the video playback artifacts using the default video player.
Wrong way to speak up....
what the ..... for real ?! just mind your own thing and in case you forgot what you wrote before (the complain and the english) :
Imprex engine 2 it is not working at all as it should be.the new settings are old Q10 quad.
I want imprex 2 to be fully on 10pro.
natural image ...it is a taste...on ,off---but i buyed for this engine
Sorry, very bad english
Hey everybody, the new Custom Cristian Firmware is here :-*
update_Q10Pro_(update&themed)_HMD-2.0.0 2016-11-17.181855.zip
https://www.mediafire.com/?o4h15793c0a0e
Thanks a lot PCristi for that beautiful work as usely. ;D
hi futeko...... thank you (and thanks to pcristi) for such a great experience with q10 pro....,
i noticed that after LP firmware 1.0.8 update ( either from 1.07 or even after downgrading from nougat to 1.0.8 ) that the touch screen front buttons became less responsive, i mean when i try to switch on the box from the touch-sensitive power button on the box , i have to keep on pressing it or even move my finger over it several times to power it on.... and such an issue is with both , official and customed 1.0.8 firmwares.
i didn't experience this with previous firmwares.
can you kindly check on that? thanks a lot in advance. cheers
Movie playback freezes from around 15 seconds to 30 seconds, then resumes. I have installed the Custom FW from this thread with no other mods.
I have Q10 Pro, wired ethernet.
I'm using the builtin media player (not using kodi or wrapper)
I first installed the official FW, same result with freezing.
I have a PopCorn Hour player next to my Q10 for testing playback from my NAS. PCH plays everything with no freezing, but Q10 has issues with all file types. With my PCH I have ruled out my local network and my NAS so the playback issue is for sure the Q10.
Any suggestions on what to check to fix the freezing?
Thank you
I have a PopCorn Hour player next to my Q10 for testing playback from my NAS. PCH plays everything with no freezing, but Q10 has issues with all file types. With my PCH I have ruled out my local network and my NAS so the playback issue is for sure the Q10.
is it possible to extrakt four PowerMenue App for a signel install or is the old one (this one http://www.futeko.com/newforum/index.php?topic=812.msg6602#msg6602 (http://www.futeko.com/newforum/index.php?topic=812.msg6602#msg6602)) still working on Android 7?
I have a PopCorn Hour player next to my Q10 for testing playback from my NAS. PCH plays everything with no freezing, but Q10 has issues with all file types. With my PCH I have ruled out my local network and my NAS so the playback issue is for sure the Q10.
The problem you describe 'Q10 has issues with all file types' and 'Movie playback freezes from around 15 seconds to 30 seconds, then resumes' is not other what other users are experiencing.
We've had thousands of FW 2.0.0 downloads and this forum is not full of users reporting such massive problems.
Presuming FW is installed correctly (restore button, two firmwares in order) then your Q10 Pro hardware may be faulty. If you bought it from us please email mail@futeko.com to request RMA.
Thanks for the repsone. Let me provide a few more details to make sure there is nothing else I can do before I request an RMA.
Everything plays, but after some time, it will freeze....wait....then resume. For some movies, it may do it only a few times through the movie. Other movies do this through most of the moive. When it does freeze, it does this for about 15 to 30 seconds each time.
FW is installed correctly. I did hte paper clip thing .
I did not change the default values for video playback, so what ever the default settings is what I am using.
When not freezing, picture and sound are great.
Last, for resolution, I have the setting at 1080p because most of my content is currently 1080p. I only change it to 2160p when I want to watch a 4k movie. Would be nice if the unit would do this automatically.
Any last ideas before I have to do the RMA stuff?
Freezing like that is not something I've experienced or read about other users experiencing. I suspect it's a hardware problem.
Is the fan operating normally? i.e. spinning? Do you have a HDD installed? What type? Freezing can be a symptom of overheating, but, again, I've heard of zero overheating type problems with Q10 Pro to date (it's a big case, even without fan it should usually be OK).
Where are you playing the files from? Do you get the same problems when playing from a USB flash drive?
Q5/Q10 Pro Custom Firmware (update&themed) base on Android 7.0coming soon...
http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__432#entry20241875
(http://www.mediafire.com/convkey/6f17/vt6jar9gs3qg2wjzg.jpg?size_id=5)
Sorry Cristian, I've tried to apply this walppapers but they look very grainy and pixellated....what I'm doing wrong?
Mr.Futeko, i had done flash my Q5Pro to android 7 and fw2.0 as per instructions... everything went well.
After rebooting everything, i played few hevc x265 mkv movies... i notice the picture quality was not right at few scenes (is like u play a scratch CD, can see pixels lagging).
What went wrong actually? do i need to install any other apps ?
Appreciate your good advise..... :-[ :-[
I'm (update_Q5Pro_ (update & themed) _HMD-2.0.0 2016-11-18.175905)
background icons on the home screen is too transparent!
how to do it darker (20%)?
Hello,
Sorry for my English.
I have just bought q10 pro at your home(with you).
I wonder if I have to make particular updates.
I meet some jerks with the kodi reader.
Thank you for your answers.
Can I use the transparency zips on stock firmware or these would only work on custom firmware only? I really want to be able to see the wallpaper.
Does it work for 5.1.1 fw?Can I use the transparency zips on stock firmware or these would only work on custom firmware only? I really want to be able to see the wallpaper.
It work for original fw.
I tried flashing the transparency zip through Android itself and it just wiped out everything. Use only the method described in the OP. I am on Nougat firmware. I remember that I was able to flash a update.zip from within Android on 5.1.1 firmware (Lollipop).
Hello!
I want to ask if i uninstall the Whicons app, will I get back all the colored icons and if they will show up and work without any restrictions or bugs? I like much better the colored icon interface that was default with the previous custom FW. So will they look the same after uninstalling Whicons?
Thanks!
Could we have an updated APK for the "On/Off Button" standalone APK. Liked that one but does not work for me under Nougat anymore.
Some user included me reported this problem.No luck, still the same problem: Going to Media Center ==> APP ==> choosing the APK results in "Installing..." this stays so forever.
Try version from https://www.mediafire.com/?o4h15793c0a0e
if still not working a clean install solved.
Some user included me reported this problem.No luck, still the same problem: Going to Media Center ==> APP ==> choosing the APK results in "Installing..." this stays so forever.
Try version from https://www.mediafire.com/?o4h15793c0a0e
if still not working a clean install solved.
Using a clean install of the last build.
Hello!
I'm a bit afraid to go directly to the custom fw. But I really like the look of the launch screen. Can anyone suggest me a third party Launcher that looks or can be configured in look similar we can see in the custom firmware?
Thanks!
Hello!
I'm a bit afraid to go directly to the custom fw. But I really like the look of the launch screen. Can anyone suggest me a third party Launcher that looks or can be configured in look similar we can see in the custom firmware?
Thanks!
There is no need to be afraid of the custom firmware. It's not radically different from the official firmware, so if you can install that then you can install this.
The launcher used is the official Himedia launcher with new colours, background, and (optionally) icons. I don't know of another similar launcher.
Pcristi,will you make 1.0.9 CS?
Pcristi,will you make 1.0.9 CS?
+1
a CS 1.0.9 will be appreciated
Thanks
Pcristi,will you make 1.0.9 CS?+1, Please
Pcristi,will you make 1.0.9 CS?+1, Please
Im using Q5 Pro Custom Firmware android 7.0 (update_Q5Pro_(update&themed)_HMD-2.0.0 2016-11-18.175905). I have some question, please help me:
1. If Naviation bar was disabled, so how can I manage recent apps (By app / remote-- my remote is airmouse KM800) ?
2. I want to use color icon them (not white icon), how to get it back ?
3. How to root this FW ? Can I use the method the same as android 5.1 ?
Thanks,
But it did work on previous firmwares :) So someone could fix it I believe
Waiting now the Custom firmware version ;) ;) from ANDROID 7. FUTEKO. HMD-2.0.1 2017-01-11.164329.+1 Me too ;)
"previous firmware" is Anrdoid 5.1.1 :)
Please test with new official Android 7.0 f/w 2.0.1.
Hello pcristi!!!!!!!! waiting for new custom firmware...... :'( :'( :'( :'( :'( :'( :'( :'( :'(
plz any screen shots
People are really, really fast, too fast for me.
(http://www.mediafire.com/convkey/a9fa/hdpkg72h1hd6844zg.jpg?size_id=5)
More will be add late on softpedia forum.plz any screen shots
while extracting by winzip it display message "the file already exsist,overwrite yes no"
ok i catched.
thanks for quick response
why i cant resize the TILES in home screen?????????
plz tell me the "boot time info"
please provide a link to update 2.0.1 2017-01-11.164329
How difficult it is to keep data? Because it is a little difficult to restore like crazy after each update, especially when updating from stock firmware to the same custom firmware version. I volunteer to test it, if needed. Thank you for this latest firmware, I kinda like the transparent launcher that you modify.
I found in mediaire new apk file as "HiMediaVideoPlayer_1.0.7_HMD_0104_Release_with_fix_exnternal_POLIAH.apk".
I Just finished updating to 2.0.1 custom FW. This time I had a backup of my installed apps. Everything went fine. One happy user right here :)
Hello. I have a problem after I migrated from Android 5.1 to 7 and after a changed the firmware to 2.0 and after to 2.1 cs.
On both firmwares (officially and custom) i can`t connect Himedia Q5 Pro to my 5Ghz wifi network, only on 2.6 Ghz.
I mention that on Android 5.1 i could connect it.
It appears on the list of wifi networks, but when i insert the password it doesn`t do anything.
Sorry for my English.
Thanks in advance for any tip you have.
Hello. I have a problem after I migrated from Android 5.1 to 7 and after a changed the firmware to 2.0 and after to 2.1 cs.
On both firmwares (officially and custom) i can`t connect Himedia Q5 Pro to my 5Ghz wifi network, only on 2.6 Ghz.
I mention that on Android 5.1 i could connect it.
It appears on the list of wifi networks, but when i insert the password it doesn`t do anything.
Sorry for my English.
Thanks in advance for any tip you have.
I can connect to 5Ghz network on 2.0.1 official no problem. The CS version shouldn't be any different in this regard so I think the problem may be something other than the Q5 Pro.
Try resetting your router and forgetting 5Ghz password on Q5 Pro (Settings - More Wifi - SSID - Forget).
where to download firmware 1.0.5. player
what is the difference between CS firmware and official firmware ? any new features it has etc ?
A new look for sure.
For me, it wasn't as stable - kept getting crashes which I never had with official fw. Kodi crashing and also Google services (I didn't try and update OTA etc..)
So just currently flashing official fw back onto box.
A new look for sure.
For me, it wasn't as stable - kept getting crashes which I never had with official fw. Kodi crashing and also Google services (I didn't try and update OTA etc..)
So just currently flashing official fw back onto box.
No stability problems with pcristi fw here. It has more and updated apps and improved appearance.
If you are only going to install one firmware I would recommend the pcristi firmware.
A new look for sure.
For me, it wasn't as stable - kept getting crashes which I never had with official fw. Kodi crashing and also Google services (I didn't try and update OTA etc..)
So just currently flashing official fw back onto box.
No stability problems with pcristi fw here. It has more and updated apps and improved appearance.
If you are only going to install one firmware I would recommend the pcristi firmware.
Any chance for little help from someone ..? How can I root this or official android 7 ? I have got rooted android 5 but I can't root this one. Can someone help me please? :( thanks
my 1 10 pro box its stuck on nougat logo cursor goes to end of loop but logo rainbow ring from nougat only runs nothing else and the power button flashes red than white constantly in my q10 pro after upgrading to version 2.0 android 7.0 any help would be appreciated?
Its the Aspect Ratio problem resolved with this Custom FW?
- not fix any issues or problemsIts the Aspect Ratio problem resolved with this Custom FW?
so with 1.1.0 CS Kodi 17.1 is fully working with HD Sound and so on?
When the new CUSTOM FIRMWARE of Q10Pro_HMD-2.0.3 PCRISTI???????????????Cs fw releases. You can download from mf.
please any SCREENSHOTS of new cs 2.0.3Link cs fw 2.0.3 deleted :(
Hello pcristi,
It is possible to create firmware v2.01. With KODI 17.1 5.1 Dolby Sound?
Because v2.03. I started falling: google android framework.
Expressly create one of two SUPER Firmware.
adb connect <ip_player>
adb root
adb connect <ip_player>
adb pull /system/etc/launcher/launcher.xml
<text>Power Menu</text>
<engtext></engtext>
<fantitext></fantitext>
<pic>bg8.png</pic>
<packagename>com.minix.power_selector</packagename>
<activity>com.minix.power_selector.MainActivity</activity>
<text>R.string.str_myapps</text>
<engtext></engtext>
<fantitext></fantitext>
<pic>bg8.png</pic>
<packagename>com.hitv.newappmanager</packagename>
<activity>com.hitv.newappmanager.main.AppMainActivity</activity>
adb connect <ip_player>
adb root
adb connect <ip_player>
adb remount
adb push launcher.xml /system/etc/launcher/launcher.xml
adb chmod 0644 /system/etc/launcher/launcher.xml
adb reboot
<app1>
<id>6</id>
<text>Miracast</text>
<engtext></engtext>
<fantitext></fantitext>
<pic>bg6.png</pic>
<packagename>com.hisilicon.miracast</packagename>
<activity>com.hisilicon.miracast.activity.WelcomeActivity</activity>
</app1>
Hi! Where can I download Q10pro 2.03 pcrist firmware?
Hi! Where can I download Q10pro 2.03 pcrist firmware?
pcristi removed it due to 2.0.3 instability. Use 2.0.1 for the time being until stable 2.0.4 is released.
Hi! Where can I download Q10pro 2.03 pcrist firmware?
pcristi removed it due to 2.0.3 instability. Use 2.0.1 for the time being until stable 2.0.4 is released.
Wouah wish wish that the new one stable released, all waiting for this firmware. When before the end of May !!!!!
Is it possible to downgrade grom 2.0.3 to 2.0.1?
pcristi removed it due to 2.0.3 instability. Use 2.0.1 for the time being until stable 2.0.4 is released.
Im having a problem with the remote back-button in Kodi 17 not working. Is there any fix for this that you now of ? Getting tires of "new controller" pop ups...
Hey guys, thanks for the awesome work. It's my first time upgrading a Q10 with 2.03.
The box keeps flashing red/white and I can see the USB drive is reading or writing because it also has a flashing led.
It's been doing this for the last 2 hours, so it's either a extremley slow USB drive, or something is wrong.
Should I let it run for a few more hours? Can anyone advise
Repacks of CFW v2.0.3 are online if anyone can't wait final 2.0.4 from HiMedia,
Where is the link for repack pcristi 2.0.3 ?
Check first post same filename and link, file is was updated on mediafire.Tq pcristi... downloading nowWhere is the link for repack pcristi 2.0.3 ?
i cannot downgrade from this custom 2.0.3 to official 2.0.1 what the procedure?! thx
i cannot downgrade from this custom 2.0.3 to official 2.0.1 what the procedure?! thx
I was having the same problem to. The process did not complete. So I reinstall 2.0.3.
i cannot
First downgrade to 1.10 (android 5 with downgrade procedure!!!!!), and upgrade to android 7 (with upgrade to android 7 procedure! ver. 2.01) working ok.
I am now happy with pcristi repack 2.0.3..
Tried many version, only 2.01 and 1.09 so far ok, but 2.01 got problem with framerate.
when i play hdr file, with 2.01 it shows 23.9xx fps, with 1.09 and 2.03 repack, it shows 24fps.
however, my eyes cant noticed much the visual different between 23.9xx fps and 24 fps.
thanks.
Repacks of CFW v2.0.3 are online if anyone can't wait final 2.0.4 from HiMedia,
Thanks for that. Installed and working! But should I be able to play ISO images of DVD and Blueray disks with this patch? All I get is a black screen.
Repacks of CFW v2.0.3 are online if anyone can't wait final 2.0.4 from HiMedia,
Thanks for that. Installed and working! But should I be able to play ISO images of DVD and Blueray disks with this patch? All I get is a black screen.
No response :'(?
Maybe it's an user error. In what way you trying to play the iso-s? KODI+Wrapper? Is the Wrapper set to Wrapper player? Try simply play it from the Media Center, to see if it would work anyway.
i already upgrade to android 7 firmware 2.0.3 but i cant install custom firmware i even rename the firmware to update.zip but when i want to install custom firmware while press restore button only show round then himedia then box reboot,help pleaase
Been running the Custom Firmware for several months working well, then suddenly a couple of days ago problems started, decided to reinstall, downloaded latest build, used my normal usb stick, program installed as per instructions but unable to open half the apps including Kodi, although Himedia player started ok but not much else would open. Many of the apps on the initial screen which didn't work had the old green Android symbol showing Whats the best method to take it back to Android 5?
but same usb stick i use to update the box to android 7 it work just fine
I installed Q10 PRO ANDROID 5.1 TO ANDROID 7 MIGRATION FIRMWARE and then HMD-2.0.0. I tested => not network and no Wi-Fi. I installed HMD-2.0.1 => no network and no Wi-Fi. I installed the last custom firmware HMD-2.0.3 and the result is the same as the previous, no network and no Wi-Fi. The hardware should be the same for all the Q10 pro so, I do not understand why for me I have this problem and for other devices not this kind of problem.
Consequently I downgraded my Q10 pro and I reinstalled HMD-1.0.9 the network and Wi-Fi work correctly then I installed the last CF in android 5.1 =>HMD-1.1.0 everything ok
So I would to now, why with my Q10 pro it is impossible to upgrade in HMD-2.X.X and android 7?
Hi pcristi, eagerly waiting for the 2.0.4 version. Cheers!
Hi, love the custom firmware thanks for your work. Is there any way to disable the startup sound?
Great job! :)
futeko, still some applications (polish ipla application) report a DRM error, the rooted device. Can this be solved?
Report rooted device ???Yes, the firmware Q10 Pro is CFM 2.04. I'm sorry for my English :). Translator in google.
Did you run Custom Firmware 2.0.4?Great job! :)
futeko, still some applications (polish ipla application) report a DRM error, the rooted device. Can this be solved?
I'm just in the upgrade process for my Q10 Pro.
Coming from 1.08 I first upgraded to official 2.01, which worked, then started the upgrade to custom 2.04.
Waiting for the Himedia start screen to show up now for 45 minutes. Should I wait any longer or is something wrong and I should start over again?
Thanks
I'm just in the upgrade process for my Q10 Pro.
Coming from 1.08 I first upgraded to official 2.01, which worked, then started the upgrade to custom 2.04.
Waiting for the Himedia start screen to show up now for 45 minutes. Should I wait any longer or is something wrong and I should start over again?
Thanks
You should upgrade to 2.0.3 first, then to 2.0.4. I did it like this several times in the last days and I did not have any issues.
If I already have official 2.0.4 installed, I can install the Custum directly, right?Yes.
If I already have official 2.0.4 installed, I can install the Custum directly, right?Yes.
Will there be an update added to remove the bottom navigation bar for 2.0.4?
So, I download the file, rename to update.zip and copy to a usb flash drive? Do I extract the file onto the usb flash drive?Rename file to update.zip not extract.
2.0.4 custom is flashable over 2.0.3 official?
If I have the 2.0.4 Official firmware can I install the 2.0.4 custom? Or can it be only installed over the 2.0.3?Yes, you can install from 2.0.4 official fw.
The opening post has been updated with new pcristi version 2.0.4 custom firmwares for Q5 and Q10 Pro.
These firmwares have a notable new feature, 5.1 AUDIO PASSTHROUGH IN ANY VERSION OF KODI / SPMC 17+ (not 7.1 HD-Audio).
So no more 'shitty' Kodi builds.
A massive thanks to pcristi.
Hello, I inslalled PCristi's CFW2.0.4 from his own link by being sent a link from him personally, and according to his description of CFW2.0.4, it is STILL BASED on 'Shitty"Kodi 17.3. What's the reality? Thanks.
Do I still have to install the "[PATCH] More auto framerate switching - HIMEDIAPLAYER " for the latest cfw?
Hello,
Today I installed the following version:
update_Q10Pro themednoNavBar26Kodi17.2RC1shitty%29_HMD-2.0.1_2017-01-10.164949
Mod Kodi on this version looks promising :),I'm missing visualization only.Unfortunately, youtube still starts at the lowest resolution ,and changing it with Rii remote controller is impossible.
Hello pcristi,
is "[PATCH] More auto framerate switching - HIMEDIAPLAYER" implemented automatically ?
Hello pcristi,
With you last version : update_Q10Pro_(update&themed&Kodi17.4[RC1-20170629])_HMD-2.0.4 2017-07-05.174159 => https://www.mediafire.com/?o4h15793c0a0e (https://www.mediafire.com/?o4h15793c0a0e)
is "[PATCH] More auto framerate switching - HIMEDIAPLAYER" implemented automatically ?
You do great job , THX ;)
Hello,
Today I installed the following version:
update_Q10Pro themednoNavBar26Kodi17.2RC1shitty%29_HMD-2.0.1_2017-01-10.164949
Mod Kodi on this version looks promising :),I'm missing visualization only.Unfortunately, youtube still starts at the lowest resolution ,and changing it with Rii remote controller is impossible.
You should install the most recent pcristi custom firmware, 2.0.4.
pcristi: Can we install this CFW 2.0.4 on the official 2.0.4 or just on the the official 2.0.3 (as the OP description says)?
THY!
From the CFW 2.0.4 changelog: - New HiMediaVideoPlayer(VideoPlayer VideoPlay) not accept AirMouse/HiControl inputs
Is this just with the CFW or with the official 2.0.4 also?
And what does it mean exactly in the case of an airmouse? It just doesn't react to the mouse pointer or entirely, even the buttons are useless?!
Thank you!
New HiMediaVideoPlayer is like that in both official and CFW 2.0.4.@Pcristi, I am unable to restore the new HimediaVideoPlayer using this patch. Could you help confirm it works?
For restore old HiMediaVideoPlayer download restore(old_player)_HiMediaVideoPlayer_1.0.11_HMD_0411(AirMouse_inputs_support).zip (http://www.mediafire.com/file/nfx0n7ms0xmaakq/restore%28old_player%29_HiMediaVideoPlayer_1.0.11_HMD_0411%28AirMouse_inputs_support%29.zip) rename to update.zip and apply from Setting/Upgrade/Local Upgrade. In case want new HiMediaVideoPlayer again use this update.zip with restore method.From the CFW 2.0.4 changelog: - New HiMediaVideoPlayer(VideoPlayer VideoPlay) not accept AirMouse/HiControl inputs
Is this just with the CFW or with the official 2.0.4 also?
And what does it mean exactly in the case of an airmouse? It just doesn't react to the mouse pointer or entirely, even the buttons are useless?!
Thank you!
@Pcristi, I am unable to restore the new HimediaVideoPlayer using this patch. Could you help confirm it works?
Thank you
Latest custom firmware is working perfectly. Netflix, HBO Go and everyting else is working as it should. I do not have enough thanks to give to @pcristi.
edited
Anyway, the custom firmware needs to be installed to the old 2.03 or over the new 2.04 official also? - EDIT, i read back and it seems you can install over official 2.04 using the "restore" method - how does this method work please? I'm sorry, i'm fairly new to this process
@Pcristi, I am unable to restore the new HimediaVideoPlayer using this patch. Could you help confirm it works?
Thank you
Yes is works for me.
Look like new recovery from FW 2.0.4 don't accepted from first try, sometime need to try 2 times consecutive.
So download restore(old_player)_HiMediaVideoPlayer_1.0.11_HMD_0411(AirMouse_inputs_support).zip, rename to update.zip copy to USB stick.
Apply from Setting/Upgrade/Local Upgrade/USB_x to get old player HiMediaVideoPlayer_1.0.11_HMD_0411 from CFW 2.0.3.
In case want new HiMediaVideoPlayer(VideoPlayer VideoPlay) again use this update.zip with restore method(paper clip).
With this CFW 2.0.4 also play dvd.iso with HIMEDIAplay or not?
thank you
The custom firmwares have an improved user interface including skinned Media Player, update and add apps, and in some cases fix bugs.
Hi pcristi,
Thanks for your effort.
I cannot download the new 2.0.4 custom firmware via Mediafire (after signing up to it).
What should I do ?
Thanks.
Hello pcristi, will it be possible to adapt to 2.0.4 with the new youtube 2.0 4k? I can not remove the youtube icon from the main page, I think it would be a good idea to adapt this type image 2.0.4.1 with the new youtube 4k; I'm sorry for my english.
Hello pcristi, will it be possible to adapt to 2.0.4 with the new youtube 2.0 4k? I can not remove the youtube icon from the main page, I think it would be a good idea to adapt this type image 2.0.4.1 with the new youtube 4k; I'm sorry for my english.
Please read "How to change home screen apps?" from Q5/Q10 Pro FAQ (http://www.futeko.com/newforum/index.php?topic=1517.0) topic GUI sections.
Hello everyone,
Following this forum for a few months now. And very happy with Pcristi's Firmware for my Q10 Pro.
I just installed the new 2.0.4 firmware and liked the new himedia player from previous version (2.0.4 original) more.
But can't seem to find the update.zip to go back to new version..
Is there anyone who can help me with that?
Keep it up Pcrisiti, really great work!!
Thanks.
Cheers,
Davy
New HiMediaVideoPlayer is like that in both official and CFW 2.0.4.Look like new recovery from FW 2.0.4 don't accepted from first try, sometime need to try 2 times consecutive.
For restore old HiMediaVideoPlayer download restore(old_player)_HiMediaVideoPlayer_1.0.11_HMD_0411(AirMouse_inputs_support).zip (http://www.mediafire.com/file/nfx0n7ms0xmaakq/restore%28old_player%29_HiMediaVideoPlayer_1.0.11_HMD_0411%28AirMouse_inputs_support%29.zip) rename to update.zip and apply from Setting/Upgrade/Local Upgrade. In case want new HiMediaVideoPlayer again use this update.zip with restore method.
So download restore(old_player)_HiMediaVideoPlayer_1.0.11_HMD_0411(AirMouse_inputs_support).zip, rename to update.zip copy to USB stick.
Apply from Setting/Upgrade/Local Upgrade/USB_x to get old player HiMediaVideoPlayer_1.0.11_HMD_0411 from CFW 2.0.3.
In case want new HiMediaVideoPlayer(VideoPlayer VideoPlay) again use this update.zip with restore method(paper clip).
Im on official 2.04 , can i install the custom 2.04 over it?
It can make Trouble right?
Thanks
[/quote
Iasked the same question. I was told it is ok to install over 2:04 official. I love it, especially how you can customise the large icons to what you want to show on the home screeb.
and it is for that I continues to prefer Android 5.1 with firmware 1.1.0 and don't apply as anywhere it was not update, because all firmware are not perfet.edited
Anyway, the custom firmware needs to be installed to the old 2.03 or over the new 2.04 official also? - EDIT, i read back and it seems you can install over official 2.04 using the "restore" method - how does this method work please? I'm sorry, i'm fairly new to this process
as the post above says - can the custom firmware be installed over the official 2.04 version?
Hoping to regain high definition multi channel audio, DTS-HD etc, that i had under android 5 and 1.09 firmware but updating to android 7 and 2.04 seems to have been lost in the official 2.04 firmware
any help greatly appreciated, thank you
Hi,
Kodi 17 is coming already installed and customized on Custom Firmware. Can I uninstall and reinstall untouched Kodi 17.4 or Kodi 18 to this firmware ?
Thanks.
there is no autostart option bei clicking menu on kodi?
Kodi - General
* How to make Kodi (or other app) launch on startup? Go to 'My Apps' from home screen, navigate to the app you want to auto-start, and press menu button on remote. The option to 'Default start' will appear over app icon.
Dear staff,
My compliments for your great products and very informative site. I try to install the new FW 2.0.4 Himedia Q10 Pro which I have purchased in February in the Netherlands at the "Media Markt". I have tried already for days to extract with WinZip, and WinRAR, without any luck the downloaded files 2.0.1, 2.0.3, and 2.0.4. I was on FW 2.0.3 and rolled back to FW 2.0.1. because of some issues. However, I do want to upgrade to FW 2.0.4. My request is would you be so kind to help me with the extracted files for my media player? I do understand to install FW 2.0.3. first, and after install FW 2.0.4. I would be very grateful if someone could help me to attach the extracted FW and send it to my e-mail (instrhenny@gmail.com).
Respectfully,
Mr. Dutchie
Thanks for the responses. I did get the HiMedia Q10 Pro back to FW version 2.0.3. Don't ask me how I did it, but now I am as far as 4 days ago. After several attempts yesterday evening to update it to FW 2.0.4 I quit. Whatever file I download (Pcristi, Futeko) it refuses to update my Media player. I have used 3 flash drives from 8, 16, and 32 GB after a clean format, but it doesn't update, and if I get into the menu from my player it recognizes the flash drives but not the update! This morning I have tried again, but unfortunately............
I would be very happy with any suggestions on this forum, and I do hope to find a solution. Best regards to everyone from Dutchie.
I downloaded straight from "Pcristi and the Futeko" site, and for the Futeko FW is have used "WinZip and WinRAR" to extract which didn't work most of the time. Yesterday I was lucky and I did extract one file, but the media player mentioned according the menu "No Upgrade File". Of course I did use the pin in de reset button etc etc. Everything according and conform the installation manual from Futeko.
Best regards ..................... Dutchie
Thank you all very much for your support on this site. I was very happy to receive a FW 2.0.4 file from someone, which I have installed and everything works fine now. It's still a mystery that I couldn't get it done with WinRAR or WinZip. I took me 4 days and I am grateful that with many thanks to this forum the problem has been solved.
Best regards for everyone,
Dutchie
problem with the custom firmware....
i came from 1.1.0 (custom 5.1 android)
i do all correct : 2.0.1 / 2.0.3 / 2.04
now i have the 2.0.4 official and i want to put the 2.0.4 custom od pcristi....
but when there is update and the circle goes, the bar of update stop at half ,with the robot image broken and a esclamative point red.
it reboot and remains the official 2.0.4
is this because i cant put the custom 2.0.4 over the official 2.0.4 ,but i can only with offcial 2.0.3 ?
is it possible the cause?
thanks
Its exactly what i do,with difference that i put the 2.04 official before custom 2.04problem with the custom firmware....
i came from 1.1.0 (custom 5.1 android)
i do all correct : 2.0.1 / 2.0.3 / 2.04
now i have the 2.0.4 official and i want to put the 2.0.4 custom od pcristi....
but when there is update and the circle goes, the bar of update stop at half ,with the robot image broken and a esclamative point red.
it reboot and remains the official 2.0.4
is this because i cant put the custom 2.0.4 over the official 2.0.4 ,but i can only with offcial 2.0.3 ?
is it possible the cause?
thanks
Try to update using the steps from this post http://www.futeko.com/newforum/index.php?topic=2096.msg17443#msg17443 (http://www.futeko.com/newforum/index.php?topic=2096.msg17443#msg17443).
Hi,
I just installed 2.04 custom and have a question about it. Is it normal that the buttons on the bottom of the screen (home, volume, recent apps etc) is no longer available?
Or is this a setting somewhere?
Any advice would be appreciated!
Hi,
I just installed 2.04 custom and have a question about it. Is it normal that the buttons on the bottom of the screen (home, volume, recent apps etc) is no longer available?
Or is this a setting somewhere?
Any advice would be appreciated!
Could you help me with my problem pcristi?
I cant put your custom 2.04 on my original 2.04 !!!
I made all passage correctly...
Do i have to come back to 2.03 original for put your custom 2.04???
Thanks
Woow did you miss bottom navigation bar :).
Download: http://www.mediafire.com/?1gf285u9nkybaey.
- Rename disable_android_navigation_bar_(CFW)_HMD-2.0.4.zip to update.zip and copy to USB pen flash
- Backup your sensitive data / kodi /etc...
- Apply update.zip following restore method using paperclip to activated back.
Could you help me with my problem pcristi?
I cant put your custom 2.04 on my original 2.04 !!!
I made all passage correctly...
Do i have to come back to 2.03 original for put your custom 2.04???
Thanks
Hi Mount81
Thx for your reply,
I thought the 2.0.3 custom firmware came with the shitty build kodi ( 2.0.3 Fixes stability problems with official 2.0.3. Includes Kodi 'shitty' for 5.1 passthrough)
M
Well......
I uninstalled the kodi app and installed the Kodi shitty build app.
Himedia settings :
hdmi output RAW
spdif output RAW
HBR output RAW
KOdi settings
number of channels :2.0 ( tried various configurations )
output configuration: optimized
volume control : 90
maintain Original volume on downmix : activated
resample quality : Medium
Keep audio device alive 1 min
send low volume noise : activated
Allow passthrough : activated
all passthrough settings Dolby digital and so on : activated
Tried both settings : set to kodi player and set to wrapper player.
And still.......no multichannel.
If i play from usb using himedia player .... crispy multichannel sound
So.......im going slightly insane :-X lol.
Any final thoughts other than a big sledgehammer? Im of to bed.........
thx !
@nvl611, @Mackenzie
Sorry fixed, please redownload and apply from Settings/Upgrade/Local Upgrade/USB_x if still need it.
Repack of 05.08.2017 details on softpedia forum
https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__720#entry21498854
@nvl611, @Mackenzie
Sorry fixed, please redownload and apply from Settings/Upgrade/Local Upgrade/USB_x if still need it.
Repack of 05.08.2017 details on softpedia forum
https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__720#entry21498854
Is this new version also with downgraded HiMedia Player (from fw 2.0.3)?! And why did you downgraded it at first place? Because the lack of airmouse support, or something more serious?
As far as I know the HiMedia Player in 2.0.3 still had the HDR aspect ratio bug, or did you managed to fix with it somehow?
Thanks for the reply!
@nvl611, @Mackenzie
Sorry fixed, please redownload and apply from Settings/Upgrade/Local Upgrade/USB_x if still need it.
Repack of 05.08.2017 details on softpedia forum
https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__720#entry21498854
Hello,
Today I installed the following version:
update_Q10Pro themednoNavBar26Kodi17.2RC1shitty%29_HMD-2.0.1_2017-01-10.164949
Mod Kodi on this version looks promising :),I'm missing visualization only.Unfortunately, youtube still starts at the lowest resolution ,and changing it with Rii remote controller is impossible.
You should install the most recent pcristi custom firmware, 2.0.4.
I'm sorry my mistake :) I currently have installed version update_Q10Pro_(update&themed&Kodi17.4[RC1-20170629])_HMD-2.0.4 2017-07-05.174159
PS. Visualisations works fine, but Rii remote controller works worse than previous versions firmware
Today I preinstall Kodi and I can not install estuary mod v.2 pcristi do you have link for kodi with latest estuary mod?
Sorry guys a new repack uploaded(08.08.2017)
- Revert to YouTube for Android TV 1.3.11
- Remove Velvet(Google search) 3.6.16.1614640
- Revert workaround Google search popups when first play with HiMediaVideoPlayer or HDMI status change.
Thanks Robert for reporting. Please download again if still need it.
Network speed ok in latest 2.0.4 CFW?
Network speed ok in latest 2.0.4 CFW?
Yes, a fix still keep it.
Hi, Pcristi!
I have installed on my Q10pro your CFW 2.0.4 from 05.08.2017. (mediafire.com). In all respects, this FW is very satisfied with me. Just want to have NEW HiMediaPlayer! I do not need a mouse control. Can you please give advice on how to do this? Maybe you can place mediafire.com link with a HMP download file for replace from old to new?
Hello, I just got my Q10 Pro from my local seller for a few days.
Could I install this CFW 2.0.4 over the official 2.0.4?
I'm having trouble getting my 4TB HDD to be used in the Q10 Pro, so probably I might try other firmware in case it will fix the problem.
No older firmware would help too? Even 2.0.1 or Android 5.1?Hello, I just got my Q10 Pro from my local seller for a few days.
Could I install this CFW 2.0.4 over the official 2.0.4?
I'm having trouble getting my 4TB HDD to be used in the Q10 Pro, so probably I might try other firmware in case it will fix the problem.
Hi,
Yes you can but probably won't solve your problem. Search the forum for the many posts regarding issues with hard drives.
No older firmware would help too? Even 2.0.1 or Android 5.1?Hello, I just got my Q10 Pro from my local seller for a few days.
Could I install this CFW 2.0.4 over the official 2.0.4?
I'm having trouble getting my 4TB HDD to be used in the Q10 Pro, so probably I might try other firmware in case it will fix the problem.
Hi,
Yes you can but probably won't solve your problem. Search the forum for the many posts regarding issues with hard drives.
I did try a lot of stuff, formatting to GPT/NTFS which should work typically, MBR/NTFS by using minitool (because windows won't allow 4tb partition using MBR), formatting to EXT4 using minitool, delete volume and setup using Q10 Pro (android) storage setting itself, attach using my Seagate GoFlex adapter then format using laptop, clean the drive using diskpart and re-initialize, and probably others.
One thing works, which was formatting the drive to fat32. Here the Q10Pro sees the HDD as corrupted usb storage. I then use the storage setup in setting and all 4TB is visible in media center. However being fat32, it limits the file size to 4GB which is not ideal at all.
One thing I have yet to try is to connect to PC SATA port and format from there.
One thing I have yet to try is to connect to PC SATA port and format from there.
I will try with a direct sata connection to my PC motherboard. Hopefully, this will work right away.One thing I have yet to try is to connect to PC SATA port and format from there.
This is the first thing you should have tried. As far as I know any other method you described supposed not to work.
Any screen shots of "update_Q10Pro_(update&themed&Kodi17.4[RC1-20170629])_HMD-2.0.4 2017-07-05.174159",as I am in CS of HMD-2.0.1.
Hi, Pcristi!
I have installed on my Q10pro your CFW 2.0.4 from 05.08.2017. (mediafire.com). In all respects, this FW is very satisfied with me. Just want to have NEW HiMediaPlayer! I do not need a mouse control. Can you please give advice on how to do this? Maybe you can place mediafire.com link with a HMP download file for replace from old to new?
http://www.futeko.com/newforum/index.php?topic=812.msg18226#msg18226
how to enable location setting ?
how to enable location setting ?
Q5/Q10 Pro do not have GPS and there is no option for it.
@parthi4k
Visit softpedia forum and click to spoiler
https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__702#entry21402864
I installed HMD 2.0.4, very nice.But Home page ICON transparency level is too dark for me.Between 10-90,which level is for default?
how to enable location setting ?
Q5/Q10 Pro do not have GPS and there is no option for it.
Network location working, open google maps to allow.
I installed HMD 2.0.4, very nice.But Home page ICON transparency level is too dark for me.Between 10-90,which level is for default?
CFW use 40.
Install method is system>setting>upgrade.am i right?
Install method is system>setting>upgrade.am i right?
No. Install should be by restore button on back of box.
The update process depends on the firmware you currently have installed.
You need official or custom 2.0.3 installed to install custom 2.0.4. See the official Q10 Pro 2.0.4 thread for info on updating to 2.0.3: http://www.futeko.com/newforum/index.php?topic=2096.0
See the opening post of this thread for info on installing 2.0.4 (when 2.0.3 is already installed): http://www.futeko.com/newforum/index.php?topic=812.0
Hi,
should I understand that with this custom firmware native kodi Dd dts is working (not the HD audio)?
- Add DD, DTS passthrough support for vanilla Kodi17/18/SPMC16.7.0/SPMC17
We need vanilla add-on ? What does it bring to audio stuff?
Thanks
Hi,
should I understand that with this custom firmware native kodi Dd dts is working (not the HD audio)?
- Add DD, DTS passthrough support for vanilla Kodi17/18/SPMC16.7.0/SPMC17
We need vanilla add-on ? What does it bring to audio stuff?
Thanks
Vanilla just means standard regular Kodi, as available in Play Store or from Kodi site.
Yes custom firmware has 5.1 audio passthrough in Kodi native player.
I would like to test Kodi 18 Leia and Estuary Mod V2. Pcristi You know the place from where i can download? Thank You again :)
If I uninstall the current Kodi, and install other version of Kodi, will the wrapper still work?
If I uninstall the current Kodi, and install other version of Kodi, will the wrapper still work?
I think it should work. The wrapped can even work in SPMC (the Android fork of Kodi). It is a setting that is done at system level.
If I uninstall the current Kodi, and install other version of Kodi, will the wrapper still work?
I think it should work. The wrapped can even work in SPMC (the Android fork of Kodi). It is a setting that is done at system level.
If I uninstall the current Kodi, and install other version of Kodi, will the wrapper still work?
I think it should work. The wrapped can even work in SPMC (the Android fork of Kodi). It is a setting that is done at system level.
I guess as long as it installs the playercorefactory.xml file in the same path as the preinstalled KODI. As far as I know all that the Wrapper does is that it modifies the playercorefactory.xml file to call the external HiMediaPlayer. Or correct me if I'm wrong.
is Kodi 18 Leia working on the himedia q10?Hey, I'm using Kodi Leia and no problem with the Wrapper to play movies. Everything is fine ;)
Hi All,
I'm glad these devices have excellent support from the community! I've read several pages but could't find an answer to my question. I have currently installed the official 2.0.4 FUTEKO. HMD-2.0.4 2017-07-07.110752, but I want to install this custom release. Can I flash it (2.0.4) directly over the current one I have?
Thanks in advance and keep up the good work!
Hi All,
I'm glad these devices have excellent support from the community! I've read several pages but could't find an answer to my question. I have currently installed the official 2.0.4 FUTEKO. HMD-2.0.4 2017-07-07.110752, but I want to install this custom release. Can I flash it (2.0.4) directly over the current one I have?
Thanks in advance and keep up the good work!
If you upgraded to official 2.0.4 by going through 2.0.3, yes, you can flash CFW (pcristi's firmware).
I have alot of experience with different brands and mediaboxes and the Q10 has potential, but with lacking features like custom screen size, zoom, custom aspect ratio and a better thought out remote control there are better alternitives to Q10 and Q5. sure they are abit slower but have more features and a way better gui!
What brainpan came up with this horrible default GUI for the Q10?
I mean, one plus to add apps would suffice would you not agree?
Sure as a default template, but give us the option to edit as people would like.
I have two plus signs including my apps that do exactly the same thing.
And get rid of facebook, skype and chrome. those that want these features should let them add them as options.
Is there a clean gui even if its modded or custom?
I have alot of experience with different brands and mediaboxes and the Q10 has potential, but with lacking features like custom screen size, zoom, custom aspect ratio and a better thought out remote control there are better alternitives to Q10 and Q5. sure they are abit slower but have more features and a way better gui!
Cheers!
/MRQT
Hi Guys!
Q5 Pro owner here on Custom Firmware 2.0.4 and I really like the look and features of this custom firmware but the alert sound on startup surprises me all the time especially when I have the volume turned up. Lol. If I wanted to give the official 2.0.4 a try, can I just reflash via usb the official 2.0.4 firmware on top of Custom Firmware 2.0.4 or do I need to downgrade to an older firmware first before applying the Offical 2.0.4 firmware? I had come from Offical 2.0.1 then 2.0.3 then CS 2.0.4 Cheers and thanks in advance! Keep up the excellent work guys! Loving this box!!
Does anyone else have power off issues with cfw 2.0.4?
They seem to be random every other day.
Hi Guys!
Q5 Pro owner here on Custom Firmware 2.0.4 and I really like the look and features of this custom firmware but the alert sound on startup surprises me all the time especially when I have the volume turned up. Lol. If I wanted to give the official 2.0.4 a try, can I just reflash via usb the official 2.0.4 firmware on top of Custom Firmware 2.0.4 or do I need to downgrade to an older firmware first before applying the Offical 2.0.4 firmware? I had come from Offical 2.0.1 then 2.0.3 then CS 2.0.4 Cheers and thanks in advance! Keep up the excellent work guys! Loving this box!!
If you have 2.0.4 installed (either official or custom) then yes you can reflash other 2.0.4. No need to downgrade. Use the restore button method.
Does anyone else have power off issues with cfw 2.0.4?
They seem to be random every other day.
More detail please about the issues?
DancesWithChickens: Try my solution explained in this thread in the Reply #9 post: http://www.futeko.com/newforum/index.php?topic=1897.0 (http://www.futeko.com/newforum/index.php?topic=1897.0)
Hi Guys!
Q5 Pro owner here on Custom Firmware 2.0.4 and I really like the look and features of this custom firmware but the alert sound on startup surprises me all the time especially when I have the volume turned up. Lol. If I wanted to give the official 2.0.4 a try, can I just reflash via usb the official 2.0.4 firmware on top of Custom Firmware 2.0.4 or do I need to downgrade to an older firmware first before applying the Offical 2.0.4 firmware? I had come from Offical 2.0.1 then 2.0.3 then CS 2.0.4 Cheers and thanks in advance! Keep up the excellent work guys! Loving this box!!
HelloYes you may.
May I install custom frimware 2.04 on official frimware 2.04 ?
*push*
update to newer kodi Versions easily ( eg Explorer) possible?
Well, never mind - Google is (mostly) your friend.
But, would somebody please explain the logic in how to disable Imprex.
It would have been much more easy to just make it possible in the "Advanced Options" menu.
Is there a solution for malfunctioning audio? In some videos in VLC i wont get audio. Playing the same file in popcorntime, it does have audio... so its not the file.
Now we are waiting for the CS 2.05 firmware from Pcristi ;) soon wish all of us ;)
CS FW 2.0.5 updated. Download and test...
Tested and everything is Ok. Good job Pcristi!CS FW 2.0.5 updated. Download and test...
I see test version for Q10 Pro.
OK, test..
http://www.mediafire.com/file/lkdd3syt7pwrr6y/update_Q10Pro%5Btest%5D_%28update%26themed%26Kodi17.4%29-HMD-2.0.5_2017-09-13.185132.zip
Tested and everything is Ok. Good job Pcristi!CS FW 2.0.5 updated. Download and test...
I see test version for Q10 Pro.
OK, test..
http://www.mediafire.com/file/lkdd3syt7pwrr6y/update_Q10Pro%5Btest%5D_%28update%26themed%26Kodi17.4%29-HMD-2.0.5_2017-09-13.185132.zip
Tested and everything is Ok. Good job Pcristi!CS FW 2.0.5 updated. Download and test...
I see test version for Q10 Pro.
OK, test..
http://www.mediafire.com/file/lkdd3syt7pwrr6y/update_Q10Pro%5Btest%5D_%28update%26themed%26Kodi17.4%29-HMD-2.0.5_2017-09-13.185132.zip
When you launch a full bluray menu, it keeps its 24 frequency or goes to 60 hz?
@EazyVG
Right need first to be on Android 7 2.0.4 and then can go with update to CFW 2.0.5.
@changmo2, @parthi4k
https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__738#entry21709293
I suppose with this CFW 2.0.5 we do not have to install patch for full blu-ray menu support separately as shown here:
http://www.futeko.com/newforum/index.php?topic=2291.0
Kindly clarify. Thanks.
pcristi as always great work. sw works perfectly. :) Write how to turn off screensaver. Regards
@afss
Check update.zip size from your USB flash, CFW ~824MB vs OFW ~636MB.
pcristi as always great work. sw works perfectly. :) Write how to turn off screensaver. Regards
Thanks for this, was unable to find it as was interfering a lot, the chromecast screensaver! Finally one issue less.
Thanks for this, was unable to find it as was interfering a lot, the chromecast screensaver! Finally one issue less.
@afss
Yes just recheck few minutes a go, check filename with any Android Explorer a common problems is file is rename under Windows to update.zip.zip inside of update.zip.
Thanks for this, was unable to find it as was interfering a lot, the chromecast screensaver! Finally one issue less.
What you mean? Interfering with what?
One more question, if I may. How I can make sure that Q10 Pro never goes to Suspend (Auto Off) due to inactivity. I cannot find an option to turn this OFF, so it stays ON till I switch it off myself. Thanks.
One more question, if I may. How I can make sure that Q10 Pro never goes to Suspend (Auto Off) due to inactivity. I cannot find an option to turn this OFF, so it stays ON till I switch it off myself. Thanks.
Make dirty install with newest version from mediafire and set android daydream OFF like that will run like OFW auto power Off after 24 hours.
I'm running cfw 2.0.4 now. Is it possible to do a rolling upgrade to cfw 2.0.5. so I don't have to config all from scratch.
I just upgraded to the Q5 Pro CFW 2.0.5 and my screens are in black and white. (background in black, text and pics in white)
In the original firmware they are coloured
Update: Its's "Whicons"
Edit 3: Has anybody, please, managed to eliminate the notification sound (chimes) that triggers even during movies? WHAT is it causing this? Pretty please?
Edit 3: Has anybody, please, managed to eliminate the notification sound (chimes) that triggers even during movies? WHAT is it causing this? Pretty please?
Check if reading yours email from gmail or uninstall gmail app help.
Hello,
How to turn off the screensaver on custom firmware? Screensaver activates while listening Spotify.
Thanks pcristi, but I completely uninstalled 500firepapper and the screen saver remained :)
Disabling the screen saver settings causes me to shut down completely Himedia ,after a few minutes
@pcristi: do you have a alternate LINK for THE LATEST 2.0.5 FIRMWARE because here on the first page of this topic the link is BROKEN !
Thanx ! And Keep up the GREAT work ! I really enjoy my Q5 PRO again with your firmware !
Hi, I have a Q10 Pro and I have a problem to update to 2.05 custom firmware.
Currently I have installed this " update_Q10Pro_(update&themed&Kodi17.4[RC1-20170629])_HMD-2.0.4 2017-07-05.174159 "
When i put the usb drive , the Q10 will show an Android logo for 5 seconds and then restarts without updating.
I also tried updating with the official firmware but nothing.
Kodi and other apps now no longer work
How can I restore the q10?
Thanks
And now what I have to do?Hi, I have a Q10 Pro and I have a problem to update to 2.05 custom firmware.
Currently I have installed this " update_Q10Pro_(update&themed&Kodi17.4[RC1-20170629])_HMD-2.0.4 2017-07-05.174159 "
When i put the usb drive , the Q10 will show an Android logo for 5 seconds and then restarts without updating.
I also tried updating with the official firmware but nothing.
Kodi and other apps now no longer work
How can I restore the q10?
Thanks
Recovery 2.0.4 had a bug, read it here.
http://www.futeko.com/newforum/index.php?topic=2297.msg19678#msg19678
And now what I have to do?
Hi,
I am a newbie to Android. I have upgraded my Q5 Pro to 2.05 Official firmware. I would like to apply the custom firmware 2.05 to obtain 7.1 HD passthrough within Kodi. I have a couple of concerns though.
1. Which backup app/program should I use to backup the existing firmware and configuration?
2. After applying the custom firmware, if I run into any issues can I go back to the previous official version? How?
Detailed help would be greatly appreciated.
With the 2.0.5 custom firmware .zip?done it myself today, so yes. Perhaps your download got corrupted. change flash drive? It should work
I have tried this process several times...
Ok , I tryQuoteWith the 2.0.5 custom firmware .zip?done it myself today, so yes. Perhaps your download got corrupted. change flash drive? It should work
I have tried this process several times...
Your link for Himedia Q10 Pro 2.0.5 doesn't work...
Can somebody tell me, i have the costum rom 2.0.4 i want go to 2.0.5 costum rom. How can i back to the official 2.0.4? From the costum rom to official rom is this possible. Can it be bricked if i downgrade the offical rom 2.0.4 ?
sorry for my english.
I solved the problem. It was a pen drive problemOk , I tryQuoteWith the 2.0.5 custom firmware .zip?done it myself today, so yes. Perhaps your download got corrupted. change flash drive? It should work
I have tried this process several times...
I just finished installing the 2.05 custom firmware of pcristi.
and everything seems ok, but I do not like the black and white presentation screen and I do not understand what the one-touch access key is for.
can someone explain to me what it is, how to remove it from the front page if possible, and also it possible to change the home page with a color, such as the original fw ???
Can someone please answer my previous question?!: Is the HiMedia Player frequency switcher patch already pre-installed in the CFW 2.0.5?!
Please ask Dolby when will decides to let manufacturers of media player to get license, for now only manufacturers of disc player can get it.Ah right they need the license first....ok then that means we will never see it thats for sure, great
Ah right they need the license first....ok then that means we will never see it thats for sure, great
Hi pcristi, with this new firmware when I turn the box off completely the image setting goes to 1080i, and I normally use 2160p, whenever the power off completely happens, how can I solve it? thank you
The official version also happens! Is there no solution to this problem? :-\ :-\ :-\ :-\ :-\
The official version also happens! Is there no solution to this problem? :-\ :-\ :-\ :-\ :-\
The official version also happens! Is there no solution to this problem? :-\ :-\ :-\ :-\ :-\
Exactly, that is what I told above. It was always like this for me regardless official and custom firmwares.
May be a stupid question. But I'm still on an original 5.1 firmware.
Can I upgrade directly to pcristi's firmware 2.04?
I want Dolby Vision support :(
I want Dolby Vision support :(
@mihailuican
Kodi 17.5.1 include a fix of startup crash and is roll out on Google play soon will be available over automatic update, until then get it form Kodi mirror.
http://mirrors.kodi.tv/releases/android/arm/kodi-17.5.1-Krypton-armeabi-v7a.apk
More details about crash of Kodi 17.5 can be get it on Kodi 17.5 crash topic
http://www.futeko.com/newforum/index.php?topic=2487.0
I can't get subtitles to default to OFF no matter what I try.Same here. Can't get rid of subtitles. It's one of the several irritating things in fw 2.0.x comparing to 1.0.x.
I can't get subtitles to default to OFF no matter what I try.Same here. Can't get rid of subtitles. It's one of the several irritating things in fw 2.0.x comparing to 1.0.x.
You need to upgrade sequentially, I have done this since 2.0.4 without pressing the reset button, doing what is called a dirty flash. You can update from within the TV box, I have done it after I flashed custom 2.0.4. When pcristi will have the custom 2.0.6 , I will do the same.
Edit: we have a patch to 2.0.6 https://forum.softpedia.com/topic/1056055-himedia-q5q10pro-android-511android-70-box-tv/page__st__774#entry21904623. It is not the full CFW, as pcristi informed me. We should get all the new features with this new patch.
I am confused.
1. currently I am on CFW ( I think 2.0.5) after Futeko upgrade to 2.0.5...so lets say I am on 2.0.5 CFW
2. I now upgrade to Futkeo 2.0.6 as fw releases on 1st Nov.
3. I then re-install BDfull menu patch as this was not included in 2.0.6 (they forgot or they refused...not technical reason)
4. I should then instal the link you have mentioned, but the website states dont upload on anything except 2.0.5...so does that mean I can bypass #2 in my sequence or is there a error in text on website instructions?
Regards
I am confused.
1. currently I am on CFW ( I think 2.0.5) after Futeko upgrade to 2.0.5...so lets say I am on 2.0.5 CFW
2. I now upgrade to Futkeo 2.0.6 as fw releases on 1st Nov.
3. I then re-install BDfull menu patch as this was not included in 2.0.6 (they forgot or they refused...not technical reason)
4. I should then instal the link you have mentioned, but the website states dont upload on anything except 2.0.5...so does that mean I can bypass #2 in my sequence or is there a error in text on website instructions?
Regards
I skipped installing official 2.0.6 firmware, I just installed CFW patch to 2.0.6 on CFW 2.0.5. I do not have any BluRay discs, so I cannot test the BDFull menu apk.
Hello Pcrist!! I have Q10 pro with CFW HMD 2.0.4.If i want to install CFW HMD 2.0.6,i should install 2.0.5 and then install 2.0.6 patch or I want to wait for CFW HMD 2.0.6????????.I checked there is no CFW HMD 2.0.6 in forum and also in mediafire.Please upload soooooon.I am waiting for it.Man, do not flood such mindless forum posts, >:(.Many people are waiting for the custom version,It takes some time to complete...
so, if I have applied Official Futeko FW 2.0.6 can I now install a prcisti customised FW ?
If so, which one?
hello pcristi,i instal new 2.06 custom update in 2.05 ofical and my himedia q5 pro now dont work good .and i cant downgrade firmware to last 2.05. help me please. sorry for my english
To fix your box install official or custom 2.0.5 using the restore button method.
another question,how to go to Official Firmware 2,05 from 2,05 custom?
CFW 2.0.6. + KODI Leia Alpha:
Android screensaver overrides playing music in fullscreen
CFW 2.0.6. + KODI Leia Alpha:
Android screensaver overrides playing music in fullscreen
Go in Apps, open the app called 500Firepaper, open settings and DISABLE SCREENSAVER.
Cheers.
Do I install this firmware (2.0.6) using the paperclip method? I thought I read that a different method since it is only a patch, but I cannot find the post.Yes can apply patch using paperclip, but not recommended.
Good morning
At present I use, with satisfaction, the official 1.1 firmware (Android 5.1) and I would like to try the latest unofficial 2.06 firmware.
My fear and if I'm not satisfied I can go back to the official firmware?
Also, compared to the official firmware, it only changes the graphic appearance?
Thank you very much
casino187, LeoeL
subtitle issue to relate to this topic please post your feedback in correct topic.
Q5/Q10 Pro Official Firmware
http://www.futeko.com/newforum/index.php?topic=711.0
Yes is general problems of HiMedia FW 2.0.5/2.0.6 can't be fixed/avoid in custom firmware.
I'm still having this subtitle issue. I think it started after 2.05 update. Subtitles are ON by default even thought i keep turning them off. Is there another setting somewhere that I'm missing?
i rename my update zip but facing same problem box cant detect custom firmware
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup. Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup. Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup. Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.
Not need be difference, but if you have time do dirty/clean downgrade to CFW v2.0.5 and apply patch for CFW v2.0.6 (https://www.mediafire.com/#3v2791l7p6s6a) then check speed play over samba.
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup. Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.
Not need be difference, but if you have time do dirty/clean downgrade to CFW v2.0.5 and apply patch for CFW v2.0.6 (https://www.mediafire.com/#3v2791l7p6s6a) then check speed play over samba.
I'm currently on CFW v2.0.5, if I do the patch to CFW v2.0.6 and I run into the Samba issue again: Will I be able to roll back to CFW v2.0.5 with retaining my current settings/setup? (this is done by running the CFW v2.0.5 firmware "normally" within the OS I guess?)
ps your link to the CFW v2.0.6 patch sends me to a general/sign-up page of mediafire.
ps Maybe I just should stick with CFW v2.0.5 but my OCD part says I need the latest FW :P
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup. Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.
Not need be difference, but if you have time do dirty/clean downgrade to CFW v2.0.5 and apply patch for CFW v2.0.6 (https://www.mediafire.com/#3v2791l7p6s6a) then check speed play over samba.
I'm currently on CFW v2.0.5, if I do the patch to CFW v2.0.6 and I run into the Samba issue again: Will I be able to roll back to CFW v2.0.5 with retaining my current settings/setup? (this is done by running the CFW v2.0.5 firmware "normally" within the OS I guess?)
ps your link to the CFW v2.0.6 patch sends me to a general/sign-up page of mediafire.
ps Maybe I just should stick with CFW v2.0.5 but my OCD part says I need the latest FW :P
I didn't even notice any differences with 2.06, but what samba issues are you having? I had issues initially and it was because under my network settings, i left the dns server 2 blank. I couldn't see the hard drive from other computers on my network. i used 192.168.1.2 for the DNS and it solved it. (my router is 192.168.1.1)
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup. Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.
Not need be difference, but if you have time do dirty/clean downgrade to CFW v2.0.5 and apply patch for CFW v2.0.6 (https://www.mediafire.com/?3v2791l7p6s6a) then check speed play over samba.
I'm currently on CFW v2.0.5, if I do the patch to CFW v2.0.6 and I run into the Samba issue again: Will I be able to roll back to CFW v2.0.5 with retaining my current settings/setup? (this is done by running the CFW v2.0.5 firmware "normally" within the OS I guess?)
ps your link to the CFW v2.0.6 patch sends me to a general/sign-up page of mediafire.
ps Maybe I just should stick with CFW v2.0.5 but my OCD part says I need the latest FW :P
Did a clean install (with reset button) of the 2.0.6 CFW and experienced buffering issues with 4k files over samba and Kodi with Himedia wrapper/player.
Tried a clean install of 2.0.5 CFW and the same files play without hiccup. Anybody else experiencing this? Is this related to CFW or original 2.0.6?
Afraid to do a dirty upgrade to 2.0.6 now for running into the same issue again.
Not need be difference, but if you have time do dirty/clean downgrade to CFW v2.0.5 and apply patch for CFW v2.0.6 (https://www.mediafire.com/?3v2791l7p6s6a) then check speed play over samba.
I'm currently on CFW v2.0.5, if I do the patch to CFW v2.0.6 and I run into the Samba issue again: Will I be able to roll back to CFW v2.0.5 with retaining my current settings/setup? (this is done by running the CFW v2.0.5 firmware "normally" within the OS I guess?)
ps your link to the CFW v2.0.6 patch sends me to a general/sign-up page of mediafire.
ps Maybe I just should stick with CFW v2.0.5 but my OCD part says I need the latest FW :P
Link fixed. Sorry I forgot to change # to ? on mediafire link.
hellowhat is your current firmware version?
i wanted to se if some one can help me,i have been sitting here for 12hours now and trying to figure ut how to write to re name the firmware,
i have Q10 pro android 7 and i will uppgrade firmware from pcristi and dont now what im doing wrong.
i hope some one can help me.
best regards peder in sweden
Hello!
Does the full CWF 2.0.6 (update_Q10Pro_(update&themed&Kodi17.5.1)-HMD-2.0.6 2017-10-25.164125) include the auto framerate patch for HiMedia Player?
Thanks!
Hello!
Does the full CWF 2.0.6 (update_Q10Pro_(update&themed&Kodi17.5.1)-HMD-2.0.6 2017-10-25.164125) include the auto framerate patch for HiMedia Player?
Thanks!
NO. Auto framerate patch need to install separately by user witch need it.
Good morning, I am a new member.I apologize if I repeat my question
I would like to know what the difference is between the custom and the official firmware (Q10 Pro)
Thanks
Other: do we need to turn off the Screensaver in this FW (to avoid to turn on while video playback)?
Thanks!
Good morning, I am a new member.I apologize if I repeat my question
I would like to know what the difference is between the custom and the official firmware (Q10 Pro)
Thanks
NB:
should I always run verification procedures at each post?
Other: do we need to turn off the Screensaver in this FW (to avoid to turn on while video playback)?
Thanks!
I don't understand your question.
Screensaver not popup when is use HiMediaVideoPlayer or Kodi with internal player for video files.
For Kodi with internal player ask on Kodi forum to solve not popup daydream for music player or when online video streaming is pause.
Kodi forum topic where maybe can start ask for fix
https://forum.kodi.tv/showthread.php?tid=301048&highlight=daydream
https://forum.kodi.tv/showthread.php?tid=316458&highlight=daydream
I have a new question: I guess i will have to uninstall and than reinstall KODI 17.6 (cause the scrapping somehow doesn't work as it should), will the DD and DTS in KODI still be working in this case? (As it has been fixed in this CFW).
Thank you!
Could this help us in any way to get us NetflixHD support?
http://freaktab.com/forum/tv-player-support/rockchip-based-tv-players/rk3229-devices/knowledge-tutorials-ac/653474-how-to-enable-widevine-on-any-box-android-5-1-1
Other: do we need to turn off the Screensaver in this FW (to avoid to turn on while video playback)?
Thanks!
I don't understand your question.
Screensaver not popup when is use HiMediaVideoPlayer or Kodi with internal player for video files.
For Kodi with internal player ask on Kodi forum to solve not popup daydream for music player or when online video streaming is pause.
Kodi forum topic where maybe can start ask for fix
https://forum.kodi.tv/showthread.php?tid=301048&highlight=daydream
https://forum.kodi.tv/showthread.php?tid=316458&highlight=daydream
Other: do we need to turn off the Screensaver in this FW (to avoid to turn on while video playback)?
Thanks!
I don't understand your question.
Screensaver not popup when is use HiMediaVideoPlayer or Kodi with internal player for video files.
For Kodi with internal player ask on Kodi forum to solve not popup daydream for music player or when online video streaming is pause.
Kodi forum topic where maybe can start ask for fix
https://forum.kodi.tv/showthread.php?tid=301048&highlight=daydream
https://forum.kodi.tv/showthread.php?tid=316458&highlight=daydream
So I have tested a bit more with the conditions and modifications above. And it sure does switch on the Daydream screensaver during video playback. It was the same with KODI+Wrapper and with HiMedia Player on it's own, I paused the video and after about 5 minutes the Daydream switched on automatically. When I tried to resume the video, there was nothing but black screen with the HiPlayer control menu and It didn't reacted to any button when tried to resume the video. My only option was is quitting with the Back button to KODI. So it is definitely something messed up, and not working as it intended.
Other: do we need to turn off the Screensaver in this FW (to avoid to turn on while video playback)?
Thanks!
I don't understand your question.
Screensaver not popup when is use HiMediaVideoPlayer or Kodi with internal player for video files.
For Kodi with internal player ask on Kodi forum to solve not popup daydream for music player or when online video streaming is pause.
Kodi forum topic where maybe can start ask for fix
https://forum.kodi.tv/showthread.php?tid=301048&highlight=daydream
https://forum.kodi.tv/showthread.php?tid=316458&highlight=daydream
So I have tested a bit more with the conditions and modifications above. And it sure does switch on the Daydream screensaver during video playback. It was the same with KODI+Wrapper and with HiMedia Player on it's own, I paused the video and after about 5 minutes the Daydream switched on automatically. When I tried to resume the video, there was nothing but black screen with the HiPlayer control menu and It didn't reacted to any button when tried to resume the video. My only option was is quitting with the Back button to KODI. So it is definitely something messed up, and not working as it intended.
Posts 563 and 587 of this topic give two ways as to how you can disable the screen saver. Its really is just a matter of going into the 500 Firepaper App and adjusting settings there.
Can the CFW 2.0.6 just be installed over the CFW2.0.5 which I'm presently running? Just asking for safety.
Other: do we need to turn off the Screensaver in this FW (to avoid to turn on while video playback)?
Thanks!
I don't understand your question.
Screensaver not popup when is use HiMediaVideoPlayer or Kodi with internal player for video files.
For Kodi with internal player ask on Kodi forum to solve not popup daydream for music player or when online video streaming is pause.
Kodi forum topic where maybe can start ask for fix
https://forum.kodi.tv/showthread.php?tid=301048&highlight=daydream
https://forum.kodi.tv/showthread.php?tid=316458&highlight=daydream
So I have tested a bit more with the conditions and modifications above. And it sure does switch on the Daydream screensaver during video playback. It was the same with KODI+Wrapper and with HiMedia Player on it's own, I paused the video and after about 5 minutes the Daydream switched on automatically. When I tried to resume the video, there was nothing but black screen with the HiPlayer control menu and It didn't reacted to any button when tried to resume the video. My only option was is quitting with the Back button to KODI. So it is definitely something messed up, and not working as it intended.
And what is that loud chiming sound 2-3 minutes after the boot-up? I guess it supposed to be some system notification sound, but I have no clue what is supposed to sign? Or is the PlayStore loging sound? Well, it's a quite enough "irregular" IMO.
I would like to try the "Moere22 icon pack" on OFW 2.0.6, but I don't want to mess up my device and be sure it won't cause any abnormality or unwanted side effect... So, is it safe?
Thanks for the reply!
Other: do we need to turn off the Screensaver in this FW (to avoid to turn on while video playback)?
Thanks!
I don't understand your question.
Screensaver not popup when is use HiMediaVideoPlayer or Kodi with internal player for video files.
For Kodi with internal player ask on Kodi forum to solve not popup daydream for music player or when online video streaming is pause.
Kodi forum topic where maybe can start ask for fix
https://forum.kodi.tv/showthread.php?tid=301048&highlight=daydream
https://forum.kodi.tv/showthread.php?tid=316458&highlight=daydream
So I have tested a bit more with the conditions and modifications above. And it sure does switch on the Daydream screensaver during video playback. It was the same with KODI+Wrapper and with HiMedia Player on it's own, I paused the video and after about 5 minutes the Daydream switched on automatically. When I tried to resume the video, there was nothing but black screen with the HiPlayer control menu and It didn't reacted to any button when tried to resume the video. My only option was is quitting with the Back button to KODI. So it is definitely something messed up, and not working as it intended.
Another issue to report: If I start a video with KODI+Wrapper right after the Box freshly Booted up, after like 3-5 minutes of playback, the screen goes totally black and the sound mutes. Just like in the case, when resuming from the screensaver: I can only see the HiPlayer interface, but it doesn't react to resuming the video, only quitting with the back button helps. I must wait like min. 10 minutes after the boot-up to avoid this freaky issue.
And what is that loud chiming sound 2-3 minutes after the boot-up? I guess it supposed to be some system notification sound, but I have no clue what is supposed to sign? Or is the PlayStore loging sound? Well, it's a quite enough "irregular" IMO.
The reinstallation of KODI might have be the case, that messed up something in the CFW system, but it just shouldn't, as I haven't done anything unusual.
Tomorrow I will flash the OFW 2.0.6, (and begin my KODI reinstallation again).
I would like to try the "Moere22 icon pack" on OFW 2.0.6, but I don't want to mess up my device and be sure it won't cause any abnormality or unwanted side effect... So, is it safe?
Thanks for the reply!
Yes will work, but keep on mind Moere22 and HiMedia are a style just few icons will be change it and maybe you like to set default wallpaper too after appply.
I would like to try the "Moere22 icon pack" on OFW 2.0.6, but I don't want to mess up my device and be sure it won't cause any abnormality or unwanted side effect... So, is it safe?
Thanks for the reply!
Yes will work, but keep on mind Moere22 and HiMedia are a style just few icons will be change it and maybe you like to set default wallpaper too after appply.
@Mount81
You never try to do anything by yourself?
Not more reply to your post. Sorry.
Oh, so I need to set the Wallpaper to the default "black screen" to make it work OK? No custom Wallpapers than? :???
I would like to try the "Moere22 icon pack" on OFW 2.0.6, but I don't want to mess up my device and be sure it won't cause any abnormality or unwanted side effect... So, is it safe?
Thanks for the reply!
Yes will work, but keep on mind Moere22 and HiMedia are a style just few icons will be change it and maybe you like to set default wallpaper too after appply.
@Mount81
You never try to do anything by yourself?
Not more reply to your post. Sorry.
Oh, so I need to set the Wallpaper to the default "black screen" to make it work OK? No custom Wallpapers than? :???
nick81: I have installed the official 2.0.6, no black screen since.
Edit: On an other forum a member also has complained regarding this.
It seams that the system needs much more time to "boot-in" with CFW than with the OFW, and sadly that's a no-go for me. :(
That Firmware 2.0.6 is a huge step back in my opinion. A lot of weird behaviour in there.
patch Icon pack & Styles CFW/OFW - HMD Q5/Q10Pro[1.1] for Launcher 3D
(Please don't quote the entire post.)
Download patch Icon pack CFW Q10/Q5Pro: mediafire (https://www.mediafire.com/?cvpydll6pfgny).
Use at your own risk(Folositi pe propria raspundere).
Don't quote the entire post.
Hi
I installed the 2.0.6 and i use Mediaplayer instead of kodi.
I play mediafiles from synology ds215 .
My problem is that i always have to enter my Login and password, allthough i set the ip from himedia in the permission list in my synology.
I created shortcuts in the menue of the Mediaplayer and i am allways been asked for Name and password.
Any Solution on this?
Many thanks!
Good morning
To update from Android 5.1 firmware 1.0.7 or later you first update to Android 7 firmware 2.0.4 official and then to any later firmware (at time of writing - i.e. up to 2.0.5 or 2.0.6 official or custom). You need only two steps.I connected HiMedia and the PC containing the multimedia files on the network, and both have the value of I.P. fixed.
The long update process you list is unnecessary and will make no difference to the problem you describe in the linked post.
Your network access problem is an incompatibility between Android 7 media center on Q10 Pro and your NAS. We've been through this in email, but the solution is going to be a fixed IP address for the NAS and entering share details manually in Q10 Pro media center. Or a change somwhere in your NAS settings, of which I am not familiar.
@DMD: I have movies named with spaces and without spaces and I am on CFW 2.0.6. What I think it may cause issues is that you have named the movies in Italian and sometimes in Italian and English. It is better to name them in English. Actually there is a Kodi naming suggestion here http://kodi.wiki/view/Naming_video_files/Movies. You can configure Kodi to show the information in Italian, I think.The problem is not in the subfolders of films that can be written with or without spaces or as you want, but it is in the main folder of the HDD, this is to be written without spaces.
I see another issue. Movies like Alien should be named Alien.1979, without 1 or any other number that does not quite have anything to do with it. Just like Star
Wars 1 1977 would most likely not be recognized as Star Wars Episode IV - A New Hope from 1977.
It may matter if the scrapper is not configured properly to think that the movies are in "Movies are in separate folders that match the movie title" (also taken from the Kodi naming scheme). It may be related to Kodi 17 rather than to the actual Nougat firmware. I do not know what Kodi version you had on the 1.0.x firmware (most likely Kodi 16.x).
Good morning.
I noticed that the remote menu button does not work with kodi, in the rest of the other apps it works. (fwc 2.0.6)
Using the Rii MX3 remote control, the menu button works regularly with Kodi.
Has anyone detected this problem?
Thank you
From FAQ (http://www.futeko.com/newforum/index.php?topic=1517.0):Thank you for the information.
* Stop Kodi 17 new remote message and disabled back / menu buttons? In Kodi, go Add-ons / My add-ons / Peripheral libraries / Joystick Support / Disable
How to disable peripheral joystick on Kodi 17.x
http://www.futeko.com/newforum/index.php?topic=1849.msg15451#msg15451
Hey Pcristi,
It would be possible to provide the latest HimediaVideoplayer apk, thank you
Has anybody done a dirty update? It's a pain to have have to redo all my info and settings.
I thought with the latest FW v2.0.7, we're supposed to be able to have the subtitles turned off by default. but for the life of me, I can't find it.
Thank you very much :) Option 1 worked for me :) :)I thought with the latest FW v2.0.7, we're supposed to be able to have the subtitles turned off by default. but for the life of me, I can't find it.
Option 1
Change Android Language any other Language then English (US) --> Thanks to @Dimitrij for share how to fixed
http://www.futeko.com/newforum/index.php?topic=2738.msg21954#msg21954
Option 2
Redownload CFW and do dirty install.
Hi All
Just a check. Can anyone confirm I can install CFW 2.07 over CFW 2.05 without any problems. Never installed 2.06 and seems little point unless I need to.
Thanks
Hello everybody,
today I dirty flashed back to CFW2.0.6.
The reason is a VERY ANNOYING BUG in subtitles of 2.0.7 - sometimes WHOLE LINES of subtitles were not shown, even if pauses were fixed with subtitle workshop. It was a definite, real, repetitive flaw which I could repeat MANY times, and which DISSAPEARED once I came back to 2.0.6.
Verified and re-verified.
This is just to let you know, for your info.
Cheers everyone.
Later Edit: I am not certain but starting with CFW2.0.7 I suddenly started to encounter repeated, relatively frequent (several times every movie or TV series) interruptions of playback, with blackscreen and video signal cutback, the 4k HDR Panasonic Smart Tv recovering signal and resuming playback after a few seconds. After rewinding back a few moments and resuming playback to go through the problem-moment again, the same blackscreen did not occur anymore, not even one time, so I presume that the phenomenon is generated by Q10Pro/Firmware, not by video file. Just for you all to know, maybe someone can put 2 and 2 together.
I only play video files stored internally on a relatively new, error free and well-maintained HDD. Only alterations to firmware are by patching for More framerate, ROOT and SAMBA. IMPREX always OFF.
I will come back with impressions if going back to CFW2.0.6 is bringing back any improvement.
Reporting back after downgrading to 2.0.6 because of the subtitles skip bug and video signal cutbacks. These video interruptions still happened yesterday, but only once, after two full watching days. So the phenomenon is still present in 2.0.6 but ALOT less frequent.
Maybe some one more knowledgeable or HIMEDIA should look into it, could be a really deal breaker.
I was reporting back not because I thought that the issue was not (or not enough) discussed here.
But simply because I downgraded to CFW2.0.6 from 2.0.7 which was absolutely unbearable.
My message was that CFW2.0.6 is, too, bugged the same with interruptions.
Is it the same issue with OFFICIAL 2.0.6 and 2.0.7 ??
And secondly, HOW do I report personally to Himedia, contact them and email them with a suggestion or complaint?
Cheers.
I have just noticed that 2.0.7 5.1shall be installed ONLY FOR INSTALL OVER FIRMWARE 2.0.4 / 2.0.5 / 2.0.6 / 2.0.7. and probably bricked my device...
any help please ?
and that is the problem.. no matter version of official firmware i use, after reboot HIMEDIA logo stays on screen for hours...
ps. device reboots after i get below screen
Could you tell me how to update my Q10 Pro CFW from 1.1.0 to 2.0.7?
HiWhy does one have to login into a internal player?? This isn't another Zidoo deal with authorization failures?
I installed the 2.0.6 and i use Mediaplayer instead of kodi.
I play mediafiles from synology ds215 .
My problem is that i always have to enter my Login and password, allthough i set the ip from himedia in the permission list in my synology.
I created shortcuts in the menue of the Mediaplayer and i am allways been asked for Name and password.
Any Solution on this?
Hi everyone. This is my first time here.
I have a new Q5 pro using a firmware that has no reference anywhere.
Out of the box it cames with: HDM-1.1.0 2017-04-08.224716 / Android 5.1.1 /Kernel 3.18.24
The box seams to run everything fine but I cant upgrade the software. I've tried all the normal procedures using the official software from Himedia website to upgrade from Android L to N.
But everytime it shows an error after the update bar barely starts.
The box is in English and no chinese words appears when i start the box. So I assume it's not the chinese versions.
Can anyone help me or just point what firmware version should I use to upgrade?
And last question. To upgrade to the custom firmware, i must upgrade the original right?
Thank you
Kanoysta
Installed cfw 2.0.7 (previously had cfw 2.0.4).
DD2.0, DD5.1, DDP5.1 work fine with kodi 17/spmc 16 (audio pass-through), DTS works (wrapper required), but no sound with AAC in kodi/spmc or internal player. All are mkv files. Any idea what the problem might be?
Installed cfw 2.0.7 (previously had cfw 2.0.4).
DD2.0, DD5.1, DDP5.1 work fine with kodi 17/spmc 16 (audio pass-through), DTS works (wrapper required), but no sound with AAC in kodi/spmc or internal player. All are mkv files. Any idea what the problem might be?
Hello everybody,
look what screen popup I got during a movie pause.
A message from KODI that they lost the appeal in a court of law, and they are short of money, requesting donations...
What do you think? Is it legit?
I attached screen photo taken with my phone.
Cheers.
What is the matter with the playback of external subtitles in this version? In the official firmware version 2.07, Media Player loses subtitle lines. This subtitle issue is driving me nuts.
I have read that FAQ more than once, I even printed it out.
What is shown to remove those Icons does not work, except for the lower row. Those default 'boxes' have no check mark.
I have read that FAQ more than once, I even printed it out.
What is shown to remove those Icons does not work, except for the lower row. Those default 'boxes' have no check mark.
GUISo defaults icons can't be removed just possible to be replaced with what you need.
* How to change home screen apps? Navigate to the tile you want to replace on home screen and press menu button on remote. Select an app from the app list and it will replace the selected tile.
Hoe do you remove those larger boxes even after the application was removed.
Specifically Facebook & Spyke. I un-installed these, but they still show and they still run. You can add off of the applications list, but there isn't a obvious way to remove them, except for ones you add with a checkmark.
Apps
* Remove system apps? Some apps are designated as system apps and cannot be deleted by normal means (Facebook, Skype, Kodi). If you really want to see them gone, follow this guide: http://www.futeko.com/newforum/index.php?topic=1653.msg13416#msg13416
Hi guys. This is the first time I'm using this custom firmware. The digital passthrough is what brought me over to using custom. Anyway, sorry if this was already asked but is it recommended to use the auto frame rate patches or are they already implemented in this custom firmware?
Thank you pcristi for the work you put into these releases!
Anyway, sorry if this was already asked but is it recommended to use the auto frame rate patches or are they already implemented in this custom firmware?
I have intsaled original 2.0.8.Can i install custom 2.0.7. over it with update procedure?
This new custom 2.0.8 firmware doesn't work correctly, I have to install again the official one... :'(
MKLM22, taxi02, kodiloaded, haovh_85, Gunther99Thanks pcristi! Waiting from you!
Thanks for reporting problems, for now CFW v2.0.8 removed from public share until got where is conflict.
I was formerly on Custom 2.06 which I found excellent, last night I updated to custom 2.08 all went well after I renamed file update and not update.zip as stated, why put zip in your instructions when it is not needed its only confusing. On 2.08 I found the bluray menus main and light the other way round to 2.06 which caught me out initially but fine now. I also found the PQ part of the menu when playing a movie acting differently than I can remember. When adjusting the sub menus there is no change to the picture until you restart the movie not as good as before as changing the sub menus before you could see instant changes in the picture like changing from natural to colourful etc.Kodi didn't seem as good as in picture quality as the inbuilt media player. Still many thanks for your work
The extension .zip is usually hidden by the Windows operating system, that's why you only see update in the file name.
The extension .zip is usually hidden by the Windows operating system, that's why you only see update in the file name.
Exactly. It's an example of Windows confusing things by trying to make them simpler.
Confirm but only crash Sound/ Volume. Storage/ Internal HDD working ok.
Here are the few bugs i have found
Trying to access these items in settings causing settings to crash
Sound/Volumes
Storage/Internal HDD
Other than that everything I use is working great !
Here are the few bugs i have found
Trying to access these items in settings causing settings to crash
Sound/Volumes
Storage/Internal HDD
Here are the few bugs i have found
Trying to access these items in settings causing settings to crash
Sound/Volumes
Storage/Internal HDD
I am now thinking it is this patch that is causing it, I forgot I use this for some of my apps that i need access to the extra features.
http://www.futeko.com/newforum/index.php?topic=2928.msg22732#msg22732 (http://www.futeko.com/newforum/index.php?topic=2928.msg22732#msg22732)
I can't reproduce this try clear data on System UI apps, maybe doe't rely like dirty update for v2.0.4..v2.0.7.
I did a dirty update last night from 2.0.7, and am only having an issue with sound/volumes crashing. storage options work fine. I cleared cache of System UI, but still crashes on sound/volumes.
Here are the few bugs i have found
Trying to access these items in settings causing settings to crash
Sound/Volumes
Storage/Internal HDD
Other than that everything I use is working great !
Sorry new version of CFW v2.0.8 available on mediafire.
@Kodiloaded, patch removed, strange why this problem not reported before.
Crash Sound/Volumes, Storage/Internal HDD fixed, @tomeeli patch not compatible with this FW.
Thanks to everyone for understand and report problems. All feedback are welcome.
So is there a proper working patch for 2.0.8 ?
It will be possible to change the appearance of icons in custom 2.08?
Thanks for the update. One question: it states that Kodi 17.6 is included. After upgrade I'm still on 17.4. How to upgrade to a newer version?
I upgraded from 2.0.6 to 2.0.8 yesterday.
The hyper links are reversed for firmware 2.08 The link under Q10 Pro downloads a file with Q5 in the file name and the file under Q5 shows as Q10 Pro when downloading.
@kodiloadedHello pcristi,
You already test it on 25.4 via other link.
V2 is include my version of patch for running without "hardware.type.television" feature/navigation bar/status bar and with thanks to @tomeeli for Settings.apk.
@apc
Woww Plex have new feature with new problems please try use old version like arm 6.15.x.x
https://www.apkmirror.com/apk/plex-inc/plex/plex-6-15-2-4143-release/
Plex have to filter keyevent only for what they apps know and not to popup controls for any unknown/undefined keyevent.
Plex works ok (NO popups) using the official firmware
Working perfect! Thanks for your hard working...Plex works ok (NO popups) using the official firmware
New files uploaded on mediafire (...)v2.1.... with fix for Plex popup control.
Change log v2.1
- Fix Plex control popup.
- Update some user apps.
Thanks to everyone for report.
Something not right with this v2.1. When i local update half-way the android logo showed exclamation mark, then everything stuck. Try to full install also the same. Any clues ?
Where is the link for Q10Pro 2.1 Customised Firmware?Here:
Again, hats off and thanks for your efforts! :D
Hi. I've installed 2.0.8 firmware on my himedia q10 pro. After the update my Q10 does not turn off and the display stays on. To turn it off I have to disconnect the power plug. Help me!!!
Owner of Q10Pro when they drink (https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX) can give a try of update_Q10Pro_(update&themed&Kodi17.6)v1.0-HMD-2.0.9 2018-07-10.172915.
Google Assistant NOT compatible with this FW. SystemUI will crash in some application.
Download CFW Q10Pro mediafire (https://www.mediafire.com/?d26aviah469q4).
First boot wait up to 20 minutes until player start to respond proper to IR remote activity.
Normal boot time is 25-30 seconds.
Note:
- CFW Q5Pro over weekend...
- If subtitle overlay is critical for your or present used FW feet your needs don't try this version.
Please test and post feedback.
Owner of Q10Pro when they drink (https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX) can give a try of update_Q10Pro_(update&themed&Kodi17.6)v1.0-HMD-2.0.9 2018-07-10.172915.
Google Assistant NOT compatible with this FW. SystemUI will crash in some application.
Download CFW Q10Pro mediafire (https://www.mediafire.com/?d26aviah469q4).
First boot wait up to 20 minutes until player start to respond proper to IR remote activity.
Normal boot time is 25-30 seconds.
Note:
- CFW Q5Pro over weekend...
- If subtitle overlay is critical for your or present used FW feet your needs don't try this version.
Please test and post feedback.
PS.What kind of kodi version is in your folder? 18alpha3 any information? Thx.
PS.What kind of kodi version is in your folder? 18alpha3 any information? Thx.
Copy of test build kodi-20180714-e2461d69-androidrf-armeabi-v7a from Kodi mirror http://mirrors.kodi.tv/test-builds/android/arm/
Look to be similar to shitty build witch can passthrough DTS/AC3 on HiSilicon SDK Android 5.1.1/Android 7.0.
it does not work with 2.09..PS.What kind of kodi version is in your folder? 18alpha3 any information? Thx.
Copy of test build kodi-20180714-e2461d69-androidrf-armeabi-v7a from Kodi mirror http://mirrors.kodi.tv/test-builds/android/arm/
Look to be similar to shitty build witch can passthrough DTS/AC3 on HiSilicon SDK Android 5.1.1/Android 7.0.
it does not work with 2.09..Sure did you try kodi-20180714-e2461d69-androidrf-armeabi-v7a.apk?
Note:
- If subtitle overlay is critical for your or present used FW feet your needs don't try this version.
Note:
- If subtitle overlay is critical for your or present used FW feet your needs don't try this version.
Hi,
first of all, thank you for you time and effort. Which kind of subtitles does not work? I have mostly srt, embedded srt or PGS in mkvs.
Cheers
Explanation on OFFICIAL Q10 PRO FIRMWARE. FUTEKO. HMD-2.0.9 2018-07-10
http://www.futeko.com/newforum/index.php?topic=3592.msg24996#msg24996
Bug is present in all Android 7 FW except v2.0.6.
Why there is no 2.09 custom version for the q5 pro?
@dddp
HiMedia Q10/Q5 Pro not support DTS-HD, DTS-MA on Kodi 17.6/18.0, this option will not be show on Kodi/System/Audio settings.
This is just a For Your Information update. I tested my Q5 Pro and Q10 Pro with the stock firmware 2.0.9 and found that the audio passthru worked on both and volume on control also worked. Kodi 18 nightly 09-18-18 beta 3 ran fine. I only use Kodi for my local owned tv shows and movies, streaming, music video, music and pictures. When is used custom firmware 2.0.9 I found that passthru causes problems in Kodi 18 and the volume on the control no longer worked.
This is just a For Your Information update. I tested my Q5 Pro and Q10 Pro with the stock firmware 2.0.9 and found that the audio passthru worked on both and volume on control also worked. Kodi 18 nightly 09-18-18 beta 3 ran fine. I only use Kodi for my local owned tv shows and movies, streaming, music video, music and pictures. When is used custom firmware 2.0.9 I found that passthru causes problems in Kodi 18 and the volume on the control no longer worked.
You could have get much better quality playback for any of these videos with the stock HiMedia Player using the Wrapper (only except the online streams). Just FYI. But it's up to you.
This is just a For Your Information update. I tested my Q5 Pro and Q10 Pro with the stock firmware 2.0.9 and found that the audio passthru worked on both and volume on control also worked. Kodi 18 nightly 09-18-18 beta 3 ran fine. I only use Kodi for my local owned tv shows and movies, streaming, music video, music and pictures. When is used custom firmware 2.0.9 I found that passthru causes problems in Kodi 18 and the volume on the control no longer worked.
You could have get much better quality playback for any of these videos with the stock HiMedia Player using the Wrapper (only except the online streams). Just FYI. But it's up to you.
I can't agree with the "much better quality playback" statement. With my TV (only 1080p no hdr) I don't see any difference between himedia player and kodi internal player with the second one being much superior with subtitles handling.
What are the differences between the custom firmware (2.0.9 for this instance purpose), and the official one?
I am asking also because I found bugs and issues within the official 2.0.9 firmware (such as occasional crashes of the launcher, video pauses, and bluetooth speaker not receiving audio after being paired) and would like to know if switching to the custom firmware (or downgrading to Android 5.1.1) will help resolve those.
Thanks!
CFW v2.1.0 maybe later on beginning of weekend.
Hello pcristi, is there a new custom firmware 2.1.0 coming any time soon ?
I would really appreciate it if someone could test a 3rd party launcher like Nova, Apex etc. Then try adding a widget to the home screen, When I did it with Factory 2.1.0 system.apk just crashes
@kodiloaded, @cch, @ionutlup, @haovh_85
Stupid error please redownload, version not change.
Thanks for reporting.
I would really appreciate it if someone could test a 3rd party launcher like Nova, Apex etc. Then try adding a widget to the home screen, When I did it with Factory 2.1.0 system.apk just crashes
Fixed download from mediafire (https://www.mediafire.com/?o4h15793c0a0e)
v2.1.0[1.2]
Q5Pro / Q10Pro / Q30
- fix widget crash
- visible 10bit settings
- removed xbin/su_hmd
v2.1.0[1.1]
Q5Pro / Q10Pro / Q30 - add TalkBack, Velvet
Q5Pro / Q30 - fix Google Assistant not sound
v2.1.0[1.0]
- initial release
Enjoy your video/music collection.
Just did a clean installation of 2.10 V1.0 on tuesday.
Is there a way to update to 2.10 V1.2 without loosing everything?
- regression of support blu-ray ASS subtitles on favor of working subtitles with overlapping times.
@Sent
Kodi with internal player is not support passthrough DTS-MA, TRUEHD(Atmos) in this players. DTS-MA output as core DTS, TRUEHD is transcode as DD.
Archos use android player so DTS-MA, TRUEHD need to be passthrough correctly.
What exactly they did don't know I'm not testing, but in CFW v2.1.0[1.3] using binary library from OFW 2.0.6 probable new functionality dispersing.
@Sent
Kodi with internal player is not support passthrough DTS-MA, TRUEHD(Atmos) in this players. DTS-MA output as core DTS, TRUEHD is transcode as DD.
Archos use android player so DTS-MA, TRUEHD need to be passthrough correctly.
@Sent
Kodi with internal player is not support passthrough DTS-MA, TRUEHD(Atmos) in this players. DTS-MA output as core DTS, TRUEHD is transcode as DD.
Archos use android player so DTS-MA, TRUEHD need to be passthrough correctly.
How about the internal musicplayer form Kodi?
According to the Estuary Mod it shows DTS-MA when an audiofile is DTS-MA encoded, even if core 24/96 DTS is not encoded.
My receiver is capable of playing DTS-MA but doesn't display the difference (with core 24/96 it does).
@Mount81
According changelog of OFW 2.0.7 (http://www.futeko.com/newforum/index.php?topic=2738.0)
HiMedia add "Support Blu-ray ASS subtitle, and regain subtitles moving up/down function".
What exactly they did don't know I'm not testing, but in CFW v2.1.0[1.3] using binary library from OFW 2.0.6 probable new functionality dispersing.
Plz anybody screenshots of CFW 2.1.0
@Sent
Kodi with internal player is not support passthrough DTS-MA, TRUEHD(Atmos) in this players. DTS-MA output as core DTS, TRUEHD is transcode as DD.
Archos use android player so DTS-MA, TRUEHD need to be passthrough correctly.
And what i can do? Will it change in the future? Is there a option to change this to the Android player in Kodi?
@Sent
Kodi with internal player is not support passthrough DTS-MA, TRUEHD(Atmos) in this players. DTS-MA output as core DTS, TRUEHD is transcode as DD.
Archos use android player so DTS-MA, TRUEHD need to be passthrough correctly.
And what i can do? Will it change in the future? Is there a option to change this to the Android player in Kodi?
Hi,
can someone please answer my question? I don't understand all the technical details. ;-)
Thank you.
@Sent
Kodi with internal player is not support passthrough DTS-MA, TRUEHD(Atmos) in this players. DTS-MA output as core DTS, TRUEHD is transcode as DD.
Archos use android player so DTS-MA, TRUEHD need to be passthrough correctly.
And what i can do? Will it change in the future? Is there a option to change this to the Android player in Kodi?
Hi,
can someone please answer my question? I don't understand all the technical details. ;-)
Thank you.
You've got the suggestion to try Archos Player, so what are you waiting for? KODI is a no-go for HD audio, and that will not change for HiMedia Boxes.
Saying-so, exclude of -maybe- better subtitle options, there aren't really any format or PQ benefits with Archos compared to the stock HiMedia Player as it uses the same stock Playback engine...
Some brands, like Zidoo or Minix have their own, specially modified version of KODI (ZDMC/XBMC) to gain most of the hardware features their Boxes capable ofEgreat too.
@Sent
Kodi with internal player is not support passthrough DTS-MA, TRUEHD(Atmos) in this players. DTS-MA output as core DTS, TRUEHD is transcode as DD.
Archos use android player so DTS-MA, TRUEHD need to be passthrough correctly.
And what i can do? Will it change in the future? Is there a option to change this to the Android player in Kodi?
Hi,
can someone please answer my question? I don't understand all the technical details. ;-)
Thank you.
You've got the suggestion to try Archos Player, so what are you waiting for? KODI is a no-go for HD audio, and that will not change for HiMedia Boxes.
Saying-so, exclude of -maybe- better subtitle options, there aren't really any format or PQ benefits with Archos compared to the stock HiMedia Player as it uses the same stock Playback engine...
1. I Think it's already installed, I've seen it in my box.
2. You should see the red lines in the corners of the TV
@lamabile
Nice catch I forgot about it, download CFW(RiCo97) from 4pda (http://4pda.ru/forum/index.php?showtopic=734477&st=14120#entry78287815) or wait v2.1.0[1.4] on mediafire and to dirty install.
@lamabile
CFW v2.1.0[1.4] is online on mediafire (https://www.mediafire.com/?o4h15793c0a0e) from few hours ago.
Yes.
I've tried to update from ANDROID 7 HMD-2.0.7 to the latest 2.1.0 CFW via rear pin push as well as flashing with the recovery files on usb to the following firmware with no luck at all. Android logo comes up and then I get the red exclamation mark.
Any idea what is going wrong?
Check on Android if file is not name by mistake update.zip.zip inside of update.zip
Check on Android if file is not name by mistake update.zip.zip inside of update.zip
I always updated in NTFS USB pencil, I'd never had any problem to upgrade...
I have named it update.zip on my computer and on my USB pen it also shows update.zip
Newbie Black Friday $99 Q10Pro
Can the custom firmware be rolled back to the Official Firmware?
I have HMD-206 installed. Can i go to the latest custom version? or is there a process?
Thanks
Can official firmware 2.06 be installed over custom firmware 2.10?Newbie Black Friday $99 Q10Pro
Can the custom firmware be rolled back to the Official Firmware?
I have HMD-206 installed. Can i go to the latest custom version? or is there a process?
Thanks
You can install custom over official and vice versa and can install the 2.1 over 2.0.6.
Now wait and hope to the pcristi custom firmware for the new 2.1.1 version ;)
A quick question.
* Is it expected that Kodi don`t need wrapper to bitstream audio and Atmos and will HDR>SDR convertion still work when trying this mod ?
Downloaded the new firmware and installed using the reset button. Installed ok but wrapper doesn't seem to work. Just comes up with "VideoPlayer" at the top of the screen. However kodi is now playing 4k movies from a NAS drive that it was having difficulty with before. The frequency switcher is working. I assume it still won't pass Atmos soundtracks? I haven't tested that yet. I'll still need the MediaCenter player for that?
If you can get Atmos soundtracks playing from within kodi I might just buy another Q10. Thanks for the update. Have a happy new year.
Peter
@algernon2607, @mute
For me Kodi + Wrapper + NFS working without problems.
If for you don't want to work and use CFW/ATV try a very old trick:
- open MovieBar
- add all yours NFS path for library intend to be use it on Kodi + Wrapper
- reboot box
- open Kodi
- add library path from Video/Files/Root filesystem/mnt/nfsShare/nfs_shareX
Like that Wrapper will see as local and probably work for you too.
@mihailuicanHi and thanks for your answer,
I see this problem with official Kodi 18.0RC4 as workaround is to disable Blu-ray menu on HiMediaVideoPlayer or give a try to other Kodi 18 build.
Bonjour
Kodi + wrapper is NOK with Ofw2.11, Cfw2.11 and Atv 2.11 on nfs share.....
Any suggestion ??
Al
Check if the following line is not missing from KODI's playercorefactory.xml file under the <!--network protocol rules--> section:
<rule protocols="nfs|smb" player="Wrapper" /> <!--all nfs|smb-->
If so you may need to reactivate the Wrapper, or insert this line manually. Se the FAQ how.
(Happens after you update/reinstall KODI).
Hi all,
Is the last beta (20190105) good to install without crash?
Thank you
https://mirrors.kodi.tv/nightlies/android/arm/master/
With the Corsair 128gb USB 3 stick plugged into the USB 3 port, I am unable to connect to wifi. If I switch to another port I can connect.While typing this reply, my box connected to the WiFi (network time on display) but no apps could access the internet. Settings option (with the ethernet and WiFi icons) reported a connection to the WiFi but the other network settings page said no connection so I went through the process and it did connect. Unfortunately now, trying to power off the machine is stuck at shutting down.......
However, any attempt to format result in corruption. With the micro sdhc card, I am trying to use the option to set it as internal storage. This fails.
With either USB or SD card, once corrupted, I cannot restore any functionality.
@SSThingYes, installed via reset button method.
Did you install CFW v2.1.1 with restore method? OFW v2.1.1 is was working?
BTW Default storage equipment option need USB/microSD formatted on PC as NTFS/FAT32.
My questions:
a. can I execute an firmware 2.11 (OFW or CFW) via the local ugrade method and than preserve all previous settings and personal apps
for either OFW 2.10 to CFW 2.10/2.11 of CFW 2.10 to CFW 2.11?
b. I noticed that this topic on the first page has not been updated with CFW 2.11 by futeko. Why?
c. Can I perform the same process for ATV 2.11 (with reset button or local upgrade method)?
d. What is the main difference between OFW wrapper version and ypur wrapper version?
Thanks in advance..
<rule protocols="nfs|http|rtmp|sop" player="VideoPlayer" /> <!--all nfs-->
<rule protocols="http|https|rtmp|sop" player="VideoPlayer" /> <!--all http-->
<rule protocols="http|https|rtmp|sop" player="VideoPlayer" /> <!--all http-->
<rule protocols="nfs|smb" player="Wrapper" /> <!--all nfs|smb-->
Hi All,
First of all I'm a newbie - 3rd day using Q10pro.
Original firmware was 2.1.1 Kodi v7.0 - cannot add media through SMB or NFS from my Synology, Kodi worked.
Decided to install newest custom firmware. Firmware installed fine but cannot add media sources through internal media player or even Kodi (8.0) from Synology. Tried ES Explorer preinstalled with new firmware - all working good, I can play movies from any location Synology, my PC, external HDD.
What is wrong with Kodi or internal player?
Somebody? Please help.
Update
Adding sources working well in Kodi and media player. Problem was in Synology share settings.
I had to disble wrapper because using wrapper I saw "Video player" text at black screen and nohing happened.
One more thing, after a few seconds I turn the device on I can see a message "Plex stopped working".
Hello to you all. I'm new here, and i just buy a new q10. I update to last custom firmware, from original. I want to ask, is there a posibility to keep or to change theme, to the one from the original. With originaly colored icon (kodi, netflix etc).Uninstall white icons app
Thank you so much.
Many thanks. I will try when i will go home. Another qestion, Is ok to use kodi 18, or kodi 17 on last custom firmware (android 7).
Best regards.
Is there also a version for the Q10 Pro with Magisk Manager? Advantage of this systemless root would be that Sky Go works with it.
Hello, I have some problems with HD audio with Kodi 18 streams. Dolby Digital and DTS are working fine, but I get no sound with Dolby Digital Plus and Dolby TrueHD?
My AV receiver can handle this kind of HD audio.
So I have set passthrough on in Kodi and via HDMI tried RAW and Auto on settings, but still no sound?
hello from new zealand . newbie here. i just got a q10 pro for a good deal. i would like to install some custom firmware. I have read alot on this forum and have spent alot of time trying to install the latest custom firmware. my current firmware is oem android 7 . hmd 2.1.0 2018 09 20.022650.Just to be sure you're naming it right I would copy the file to your desktop on the PC, right mouse click, choose properties, rename the file under the general tab to...... update.zip
i have tried multiple times to install custom firmware over this.
do i have to downgrade to android 5
i have right clicked on the downloaded zip and right clicked it and renamed it to update.zip.and moved the zip to the usb pen drive . is this the correct way??
i have followed the instructions .......i get to a floating circle but then nothing just boots to normal screen ...im thinking its nit recognising the file i have changed .
sorry if this has been sorted before but i did troll through multiple pages but no answers....
help!!
Hi ,
Subtitle change or Audio Track change crashes the video player, did anyone have a similar issue. Im not using Kodi.
Is there a way to turn off subtitles by default? Or is there a fix to the crash. I cannot change audio tracks or turn subtitles off without a crash.
What is Android language set on your box? I don't see problems with English(US).
yes, same problem annoy me much. Can't believe HiMedia programmer hit on such error.
What is Android language set on your box? I don't see problems with English(US).
yes, same problem annoy me much. Can't believe HiMedia programmer hit on such error.
@mulderfox
1 Usually happens when add Google account and fix if box is rebooted.
2 Unlucky Kodi 18.0 RC4 is was wrong choose to be CFW, can be replace with other Kodi 18.0 builds as Beta4, RC3(2018/12/09) or "shitty" build(2018/12/22) witch is was report by users here to be more stable.
Guys, simple question for you if that's not too much to take :)
1. I am an owner of KDLINKS A400 unit.
2. Have Android version 7 on it (european/international version).
3. Want to install custom version of firmware to get all those extra functionality and perks mentioned in this forum but NOT too sure how to start this.
4. Should I first install PRO version of firmware as per procedure here (http://www.futeko.com/newforum/index.php?topic=1610.0) and let's say this version: Q10 PRO FIRMWARE. ANDROID 7. FUTEKO. HMD-2.0.1 2017-01-10.164949 ??
5. Once this new version is installed should I then install custom version of firmware like explained here (http://www.futeko.com/newforum/index.php?topic=812.0) ? BUT which version do you suggest I should go for to be the most stable and without many issues/bugs ?
6. If I am wrong in thinking about UPGRADE process please correct me. I will appreciate all your help.
THANKS IN ADVANCE GUYS.
Guys, simple question for you if that's not too much to take :)
1. I am an owner of KDLINKS A400 unit.
2. Have Android version 7 on it (european/international version).
3. Want to install custom version of firmware to get all those extra functionality and perks mentioned in this forum but NOT too sure how to start this.
4. Should I first install PRO version of firmware as per procedure here (http://www.futeko.com/newforum/index.php?topic=1610.0) and let's say this version: Q10 PRO FIRMWARE. ANDROID 7. FUTEKO. HMD-2.0.1 2017-01-10.164949 ??
5. Once this new version is installed should I then install custom version of firmware like explained here (http://www.futeko.com/newforum/index.php?topic=812.0) ? BUT which version do you suggest I should go for to be the most stable and without many issues/bugs ?
6. If I am wrong in thinking about UPGRADE process please correct me. I will appreciate all your help.
THANKS IN ADVANCE GUYS.
You should have version 2.0.4 or higher to install the latest firmware. If you don't install 2.0.4 first
Hi guys,
I am using customer firmware 2.1.1, and I want to use AutoInput with Tasker. AutoInput requires to turn on Accessibility in Settings, but I cannot find Accessibility there.
Anyone knows how to access the Accessibility setting?
I have a small problem with the latest custom FW and the latest Kodi, updated via playstore, where kodi sometimes crashes and i have to quit kodi. The file i'm playing will keep playing as it's using the wrapper. Kodi would occasionally crash using the version that came with the custom firmware as well so i don't think this is the problem
Any idea if there's solution to this problem? Thanks
Hi guys,
I am using customer firmware 2.1.1, and I want to use AutoInput with Tasker. AutoInput requires to turn on Accessibility in Settings, but I cannot find Accessibility there.
Anyone knows how to access the Accessibility setting?
Click on the settings gear icon
Scroll across to "More" and click on this.
Using your cursor, click on the search (magnifying glass) in the top right.
Now type "accessibility".
This will bring up the links you need.
I have a small problem with the latest custom FW and the latest Kodi, updated via playstore, where kodi sometimes crashes and i have to quit kodi. The file i'm playing will keep playing as it's using the wrapper. Kodi would occasionally crash using the version that came with the custom firmware as well so i don't think this is the problem
Any idea if there's solution to this problem? Thanks
Uninstall current KODI and install 17.6 (http://mirrors.kodi.tv/releases/android/arm/) and turn off PlayStore updates for KODI. 18.x is still unstable on Android with external players.
thanks for you quick reply. Is this a shitty version so 5.1 works? Sometimes the wrapper doesn't work and having 5.1 support is nice
When I play movies, I have a dark image, but can't find any settings in Kodi to make it lighter?
When I play movies, I have a dark image, but can't find any settings in Kodi to make it lighter?
Which player are you using? Does it also happen with youtube?
When I play movies, I have a dark image, but can't find any settings in Kodi to make it lighter?
Which player are you using? Does it also happen with youtube?
I use the standaard player, it is only in Kodi.
When I play movies, I have a dark image, but can't find any settings in Kodi to make it lighter?
Which player are you using? Does it also happen with youtube?
I use the standaard player, it is only in Kodi.
If you watch the same movie with Himedia player the image is lighter?
When I play movies, I have a dark image, but can't find any settings in Kodi to make it lighter?
Which player are you using? Does it also happen with youtube?
I use the standaard player, it is only in Kodi.
If you watch the same movie with Himedia player the image is lighter?
I use an addon for movies and tvshows, so I don't know which player it is using, but thought it didn't work with the Himedia player?
When I play movies, I have a dark image, but can't find any settings in Kodi to make it lighter?
Which player are you using? Does it also happen with youtube?
I use the standaard player, it is only in Kodi.
If you watch the same movie with Himedia player the image is lighter?
I use an addon for movies and tvshows, so I don't know which player it is using, but thought it didn't work with the Himedia player?
If it's streaming it doesn't. You'll probably get better support in a kodi forum.
can this firmware be install on my Chinese version hardware?
can this firmware be install on my Chinese version hardware?
This firmware is based on the official version so no you can't.
I have a small problem with the latest custom FW and the latest Kodi, updated via playstore, where kodi sometimes crashes and i have to quit kodi. The file i'm playing will keep playing as it's using the wrapper. Kodi would occasionally crash using the version that came with the custom firmware as well so i don't think this is the problem
Any idea if there's solution to this problem? Thanks
Uninstall current KODI and install 17.6 (http://mirrors.kodi.tv/releases/android/arm/) and turn off PlayStore updates for KODI. 18.x is still unstable on Android with external players.
Hello back
In default file manager on custom android 5 1.1.0 firmware, the "menu" remote button does nothing :-\
The file editing list doesn't show up ...
What to do ???
Hello back
In default file manager on custom android 5 1.1.0 firmware, the "menu" remote button does nothing :-\
The file editing list doesn't show up ...
What to do ???
Hello back
In default file manager on custom android 5 1.1.0 firmware, the "menu" remote button does nothing :-\
The file editing list doesn't show up ...
What to do ???
Install a later firmware. What is the reason for running an Android 5.1 firmware that is 2 years old?
Some phones have an IR filter so that this test couldn't work.
Try with a working remote first. :-)
Where is the change-log stating the difference from 2.1.1 to 2.1.2Sorry I don't understood your question.Haimeidi [sic] Q10 four generation 2.1.2 firmware version released 2019-03-29
Download address: https://bbs.himedia.cn/thread-221645-1-1.html
Modify the record:
1. Add support for mk3d format video;
2. Add support for local video player menu mouse operation.
3. Add support for ES browser to play local video support for external subtitles.
4. Solve the IP control after booting prompt video error to find The problem with the hard disk.
5. The new local music player has been completely revised to enrich the local music playback experience. The new version supports the following functions:
5.1. New music UI interface.
5.2. Support song online poster acquisition.
5.3. Support online Lyrics display.
5.4. Support SMB/NFS mount.
5.5. Support local storage device mount.
5.6. Support song local collection.
5.7. Support user-defined song list.
5.8. Support full scan, folder mode two modes.
5.9. Support singer information acquisition, display, view.
5.10. Support album information acquisition, display, view.
5.11. Support interface background use song picture Gaussian blur effect.
5.12. Support reading songs in posters, singers, albums, time And other information.
5.13. Support current song information acquisition: KHz, Kbps, Bits, CH (channel).
5.14. Support loop playback, sequential playback, random playback, single The music loops four loop modes.
5.15. Support sorting function: song first letter, singer initials, song release time, song add time four sorts, all support descending, ascending.
BUT .... will it work on European boxes??? I'm NOT going to be the first to try it ::)I have no Idea, But it certainly sounds good !
update_Q5Pro_(update&themed&Kodi18.2)[v1.4]-HMD-2.1.2 2019-03-28.093202
update_Q10Pro_(update&themed&Kodi18.2)[v1.4]-HMD-2.1.2 2019-03-25.134305
- CFW adapted from HiMedia v2.1.2 OFW for Chinese model
OP here (https://www.futeko.com/newforum/index.php?topic=812.msg28266#msg28266)
Changelog vs CFW v2.1.2[1.0]:
v1.4
- update YouTube TV to v2.06.06
- add swapon script by Dimitri73 (http://4pda.ru/forum/index.php?showtopic=734477&st=18360#entry85153424)
- avoid possible PQ degradation cause by modified HimediaVideoPlayer
- fix default subtitle language Russian not working when Android language set Russian.
v1.3
- fix back screen over Wrapper + NFS
- add Accessibility on settings.
- add Applications settings on Android settings.
LE: Download from mediafire (https://www.mediafire.com/?o4h15793c0a0e).
But is this CF for European models?Yes adapted for European models.
Does that mean that when the official FW 2.12 (EU) will be released there won't be another CFW 2.12?But is this CF for European models?Yes adapted for European models.
Does that mean that when the official FW 2.12 (EU) will be released there won't be another CFW 2.12?Most probably will be CFW base on OFW v2.1.2 for International models(EU) when HiMedia will release special if will come out with fixes for already report problems from CN version will see that at right time.
Will firmware 2.12 Erase everything? Happy so far with 2.11Why you want update to v2.1.2 if you are so far happy with v2.1.1?
During startup, the HIMEDIA logo in pink appears :), only then changes to normal. Is this a problem?
Small fixes for CFW v2.1.4:
v1.2
- fix back screen over Wrapper + NFS
- add back VFD display clock on/off option on Android settings
OP updated (https://www.futeko.com/newforum/index.php?topic=812.msg28699#msg28699).
Hello and THANK YOU @pcristi,
I intend to try a dirty update from CFW2.1.1 to CFW2.1.4.
1. Do I need to redo and reinstall all those patches: Samba, Framerate?
2. Does the subtitle issue stilll appear as FIXED, as in 2.1.1?
Thanks.
open_pli_pl: Have you tried with OFW 2.1.4? Was it the same with 2.1.1?
open_pli_pl: Have you tried with OFW 2.1.4? Was it the same with 2.1.1?
so i made full testing Today,
2.1.1 official and custom - no luck still flat, background movie 3D, subtitles flat
2.1.4. official nad custom - no lusck still flat
after each install of each firmware, i made test to test if it's flat; later i made factory reset from menu and made once more testing with subtitles
in each scenario always flat.
also my fried check on his himedia q5 pro - also same, always flat
@afss: right, I may be a fool watching 3D movies on my Q10 pro all these years. You can have options render subtitles in 3D, but this is only working with the wrapper/Himedia player only.
open_pli_pl: Have you tried with OFW 2.1.4? Was it the same with 2.1.1?
so i made full testing Today,
2.1.1 official and custom - no luck still flat, background movie 3D, subtitles flat
2.1.4. official nad custom - no lusck still flat
after each install of each firmware, i made test to test if it's flat; later i made factory reset from menu and made once more testing with subtitles
in each scenario always flat.
also my fried check on his himedia q5 pro - also same, always flat
3D has never worked properly on the Himedia Q5/Q10 PRO products, specially if you need subtitles - I have flagged this before to Himedia and apparently there is no solution for it - I have since moved to the Zidoo Z9S (still have both boxes), which plays 3D subtitles perfectly.
This Kodi crashing happened to me several times, because I restored a previous Kodi 17.6 backup, in order to save time while reinstalling all addons.
I uninstalled Kodi completely, and I reinstalled from this forum Kodi 18.3, and is working perfectly, but I had to reinstall addons and settings manually.
[/quotes
Hi im running2.0.9 2018-07-10.preesently. i have manually been using an Apk to load kodi as 17.6 due to the nemerous crashes that i was experiencing with leia 18.1 and 2. Are you suggesting that the crashing problems appear to be fixed with kodi 18.3 which I wasnt until now aware until now had been released ;)
Thks
Edit sorry unable to get quotes correct. Maybe a mod could fix for me. Apologies / thks
This Kodi crashing happened to me several times, because I restored a previous Kodi 17.6 backup, in order to save time while reinstalling all addons.
I uninstalled Kodi completely, and I reinstalled from this forum Kodi 18.3, and is working perfectly, but I had to reinstall addons and settings manually.
Install with paper clip and never open HiMedia Settings/Network, use inside of that HiMedia Settings/More/Ethernet(WiFi) then WiFi will be keep OFF.
In unlucky case when user touch HiMedia Settings/Network WiFi will be always trigger ON.
Hi, I've enabled developer options, but nowhere in the menu can I get into the settings, where can I find it?
It works with me.
CFW/OFW 2.1.4, after watching, press back two times, and while in list view in Kodi, pres Options, and there you have several alternatives, delete, Play With... and 'Mark as watched'...
@mulderfox
"Kodi still crashes" share on private message (https://www.futeko.com/newforum/index.php?action=pm;sa=send;u=72) Kodi log and Android logcat. After that I will let you know if is it's just Kodi problems and need ask on Kodi forum for help.
Hello I can't upgrade, it starts then get android+ dead red triangle please help.
It was bad USB I've removed my commentHello I can't upgrade, it starts then get android+ dead red triangle please help.
Yes, don't give us any details. We'll figure it out!
Not sure if this was addressed prior but my search came up empty.
I just installed the most recent custom firmware and so far it is great but I noticed that when i opened KODI that a lot of the options on the left menu are gone. Like the Music section, TV shows, Movies, etc. All that is there now is Add-ons, Pictures, Videos, Weather. 4 options. My previous one had 13. Is there a way to add some or all of these back?
update_Q30_(update&themed&Kodi18.2)[v1.2]-HMD-2.1.4 2019-05-31.153235
update_Q5Pro_(update&themed&Kodi18.2)[v1.2]-HMD-2.1.4 2019-06-04.100340
update_Q10Pro_(update&themed&Kodi18.2)[v1.2]-HMD-2.1.4 2019-05-31.171152
(https://www.mediafire.com/convkey/2ad2/sd61pc66qshctt3zg.jpg?size_id=4)
Changelog:
v1.2
- fix back screen over Wrapper + NFS
- add back VFD display clock on/off option on Android settings
v1.1
- reverse to HiMedia setting from v2.1.2 as new setting of v2.1.4 has some missing option
Thanks to @haovh_85 for report missing options.
v1.0
- follow HiMedia v2.1.4 OFW
Online on mediafire (https://www.mediafire.com/?o4h15793c0a0e).
Note:
- Before try backup, backup, backup, need more users to test and feedback.
- Dirty update maybe can apply between update CFW version, minor updates will not be problems.
Thanks for understanding and enjoy yours video collections.
Is there any chance to get this skin for Q5 pro?
Is there any chance to get this skin for Q5 pro?
Small update.zip (http://www.mediafire.com/?a9dnqflsnm94fxx) apply from menu on top of Q5Pro v2.1.4 will have closer results.
https://photos.app.goo.gl/6n7T1D8vvNHvEW5m9
I believe I have a cfw 2.0.9 as illustrated in the picture. Forgive my ignorance, I've always updated by pressing the reset button in the back on boot. Is that considered dirty? Or is it updating from the menus considered dirty. If o want to install this latest cfw what's the better option. I have had bricking issues in the past and would like to avoid them. I dont mind a wipe of the system as there's not much on here presently.
About
These firmwares are created voluntarily by forum user pcristi. Show your appreciation by buying him a...
(https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX)
All of pcristi's firmwares are available from his Mediafire account: https://www.mediafire.com/?kvlryqpyzcac3
Installation Instructions
The method is slightly different to our official firmware downloads. For these firmwares, you must rename the downloaded zip file to update.zip.
FIRMWARE INSTALL CAN TAKE UP TO 20 MINUTES. DO NOT POWER OFF DURING INSTALL. WAIT FOR THE HOME SCREEN TO APPEAR.
1. Rename firmware update .zip (e.g. update_Q(...)Pro_(...)_HMD-1.0.8(...).zip) to update.zip.
2. Copy update.zip to the root of a USB pen drive.
3. Insert the USB pen drive into any USB port of the Q10/Q5Pro.
4. With the Q10/Q5Pro turned off, use a paper clip or pen to press and hold the the pinhole restore button on the back side of the Q10/Q5Pro.
5. While keeping the RESTORE/UPGRADE button pressed, turn on the Q10/Q5Pro.
6. The Q10/Q5Pro will show an Android logo and proceed to upgrade the firmware.
7. The box will auto-reboot when finished.
8. First boot can take 4-5 minutes.
9. Wait 15 minutes after first boot to allow system and apps to initialise.
(http://www.futeko.com/productimages/MP068-1.jpg) (http://www.futeko.com/productimages/MP067-1.jpg) Q10 Pro + Q5 Pro
Seperate downloads for Q10 and Q5 Pro.
Make sure you select the correct one for your machine.
Read the instructions carefully.
*** pcristi Custom Firmware ***
Based on regular official firmware. Includes interface enhancements, updated apps, and some of the pcristi patches (e.g. Samba speed enhancement).
See individual forum entries for details.
2.1.4 [LATEST] Download + Info (https://www.futeko.com/newforum/index.php?topic=812.msg28699#msg28699)
Android 7: 2.1.4 (https://www.futeko.com/newforum/index.php?topic=812.msg28699#msg28699), 2.1.2 (https://www.futeko.com/newforum/index.php?topic=812.msg28266#msg28266), 2.1.1 (https://www.futeko.com/newforum/index.php?topic=812.msg26994#msg26994), 2.1.0 (https://www.futeko.com/newforum/index.php?topic=812.msg26089#msg26089), 2.0.8 (https://www.futeko.com/newforum/index.php?topic=812.msg23614#msg23614), 2.0.7 (http://www.mediafire.com/file/lxai24msocr0me4/update_Q10Pro_%28update%26themed%26Kodi17.6%29-HMD-2.0.7_2018-01-12.113104.zip), 2.0.6 (https://forum.softpedia.com/topic/1056055-himedia-q5q10pro-android-511android-70-box-tv/page__st__774#entry21904623), 2.0.5 (https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__738#entry21709293), 2.0.4 (https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__702#entry21402864), 2.0.1 (https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__666#entry21010212)
Android 5: 1.1.0 (https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__648__gopid__20954836#entry20954836), 1.0.9 (https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__486#entry20423474), 1.0.8 (http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__306#entry20046516), 1.0.7 (http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__144#entry19733664), 1.0.6 (http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__54#entry19556789), 1.0.3 (http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__54#entry19310814), 1.0.1 (http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/#entry19199525)
*** pcristi Android TV Custom Firmware ***
pcristi full Android TV OS firmware: pcristi Android TV firmware thread (http://www.futeko.com/newforum/index.php?topic=2219.0)
*** CS-AK Custom Firmware ***
- Alkaid (http://4pda.ru/forum/index.php?showuser=1901872) for idea, new design, icon pack.
- pcristi for scripts, testing, assembly.
More customised version of the pcristi firmware with different launcher interface and apps: CS-AK custom firmware thread (https://www.futeko.com/newforum/index.php?topic=4275.0)
vccy, you're doing something wrong with the usb flash drive or the update file on it.
Be sure to update the correct version depending on the version you have installed right now.
vccy, you're doing something wrong with the usb flash drive or the update file on it.
Be sure to update the correct version depending on the version you have installed right now.
Hi stl
Did this firmware need to put into a clean pendrive? Cos my pendrive got other things inside it together. Btw I am upgrading to android 7.
(mulderfox September 23, 2019)Hi,
Yes, I do have the same problem with various apps and Kodi 18.4. It's very annoying. Also there was a time that I could scroll with the HiMedia Q10 Pro remote upwards or downwards in an app, and that suddenly doesn't work anymore too. However the HiMedia Q10 Pro becomes sluggish or slow with 2 GB Ram. It's already a model from 3.5 years nowadays. I try to find something else with a newer CPU/GPU and 4 - 8 GB Ram.
This is still a crap!
I was able to dwongrade from official 2.1.4 to 2.0.3 and 2.0.4 and still either I change the name to update.zip or not, it is still not recognized as an upgrade and does not start!
Is there any blocker in official firmware that I am not aware of that is not allowing to use custom one? I have now 2.0.4 and not able to upgrade to 2.1.4 custom...
STAGE 1. Migrate from Android 5.1 to Android 7
[...]
Download: http://www.mediafire.com/file/ylwc9cbk6bzly14/Q5_PRO_ANDROID_5.1_TO_ANDROID_7_MIGRATION_FIRMWARE.zip
STAGE 2. Install latest Android 7 FW
Q5 PRO FIRMWARE. ANDROID 7. 2.0.0-FUTEKO-EN. HMD-2.0.0 2016-11-18.175905
[...]
Download: http://www.mediafire.com/file/b5joy56vnon2txw/DO_NOT_INSTALL_DIRECTLY_OVER_ANDROID_5.1_FIRMWARE%21_SEE_FUTEKO_FORUM_FOR_INFO._Q5_PRO_FIRMWARE._ANDROID_7._2.0.0-FUTEKO-EN._HMD-2.0.0_2016-11-18.175905.zip
Hello,
I am trying to update my Q5 pro.
I come from: Android 5.1.1 / HMD-1.0.9 2016-12-14.190953
So I did this:STAGE 1. Migrate from Android 5.1 to Android 7
[...]
Download: http://www.mediafire.com/file/ylwc9cbk6bzly14/Q5_PRO_ANDROID_5.1_TO_ANDROID_7_MIGRATION_FIRMWARE.zip
STAGE 2. Install latest Android 7 FW
Q5 PRO FIRMWARE. ANDROID 7. 2.0.0-FUTEKO-EN. HMD-2.0.0 2016-11-18.175905
[...]
Download: http://www.mediafire.com/file/b5joy56vnon2txw/DO_NOT_INSTALL_DIRECTLY_OVER_ANDROID_5.1_FIRMWARE%21_SEE_FUTEKO_FORUM_FOR_INFO._Q5_PRO_FIRMWARE._ANDROID_7._2.0.0-FUTEKO-EN._HMD-2.0.0_2016-11-18.175905.zip
Then I tried to install the pcristi CFW HMD 2.1.4 (find here: https://www.mediafire.com/?o4h15793c0a0e#byy12zxf1ia42), but I am stuck on HIMEDIA Logo ...
I tried to install HMD 2.0.1, I tried to downgrade to Android 5.1 and whatever I can try, I have an Android logo with a red warning on my screen, then a reboot and stuck again on HIMEDIA Logo.
Do you have any fix for this issue?
Thanks
Migrate to 2.0.4 from android 5 and then install the latest version. See the official firmware topic. If you see the green Android you're still on Android 5.The 2.0.4 has no first post ... no download link: https://www.futeko.com/newforum/index.php?topic=2097.0
Migrate to 2.0.4 from android 5 and then install the latest version. See the official firmware topic. If you see the green Android you're still on Android 5.The 2.0.4 has no first post ... no download link: https://www.futeko.com/newforum/index.php?topic=2097.0
Do you have it?
By the way, I can first see the circle ... then android logo warning, then a reboot
Migrate to 2.0.4 from android 5 and then install the latest version. See the official firmware topic. If you see the green Android you're still on Android 5.The 2.0.4 has no first post ... no download link: https://www.futeko.com/newforum/index.php?topic=2097.0
Do you have it?
By the way, I can first see the circle ... then android logo warning, then a reboot
If you see a circle you're on android 7, and you have to know which version to carry onOk I found 2.0.4 here: https://www.mediafire.com/?o4h15793c0a0e (hope this is the good one)
If you see a circle you're on android 7, and you have to know which version to carry onOk I found 2.0.4 here: https://www.mediafire.com/?o4h15793c0a0e (hope this is the good one)
I got the circle, then the barre, then a reboot. I am stuck on HIMEDIA Logo again (I have been waiting more than 10minutes) ... but I think I am now on 2.0.4 and Android 7. But why am I stuck on HIMEDIA Logo? I can't go to the home screen ...
I tried to switch off ... It doesn't want ... I disconnected it. Then restart it sill stuck on HIMEDIA Logo with troubles on the screen (https://ibb.co/2Ps3W4w)
This Q5 makes me cry!
Do you have any solution?
Thanks
Try to install official 2.0.3 to see if the box boots
Try to install official 2.0.3 to see if the box boots
There is no 2.0.3 here: https://www.futeko.com/newforum/index.php?topic=711.0
The topic for the 2.0.3 is empty and there is no 2.0.3 there too: https://www.mediafire.com/?o4h15793c0a0e
Do you have a direct link?
I tried to install the 2.0.8 and it's ok but still stuck on the HIMEDIA Logo ... I don't know how to go further than this step.
See this thread for an alternative Sambs server: https://www.futeko.com/newforum/index.php?topic=4640.0Thanks, but I have issues with its limitations. as in, I cannot keep the share name, and setting the shares is not working correctly. plus I cannot set users and have to set it to anonymous.
Hi AllFrom version 2.0.4 and above you can install directly version 2.1.4
Just to be sure, as having read topic I’m not. Currently running custom 2.09. Can I update straight to 2.14 or are there any intermediate builds which I have to install until finally installing 2.14?
Thanks
Think this maybe for pcristi albeit others may know as many use the custom versions so perhaps have had same dilemma. I noticed when downloading the 2.14 option that the kodi version is 18.2. On pcristi mediafire there is a kodi folder listing newer versions of Leia builds being shitty armeabi to 18.5 and /Leia armeabi to 18.6. Can someone explain the difference between them , not the version and which one do I download and install so as I have the kodi skin which pcristi normally inserts with the custom versions.
thanks again
That’s a week of 2.14 enough. It’s rebooting so much the clobbers will be out of a job. Going back to 2.09 and 17.6 and looking forward to watching something in full without interruption. Thanks to all. Appreciate it’s the hardware at fault.
Update 13/4
Regret to report that downloaded to 2.09 and still rebooting like mad. So definitely hardware problem I think. Anybody got any ideas. Every time I use the remote to switch function it seems to reboot. Kodi is closing every time you leave it, help. Would installing all the software versions individually in sequence help? Thanks
About
These firmwares are created voluntarily by forum user pcristi. Show your appreciation by buying him a...
I just local upgrade to ATV Firmware, but i need to rollback to Official Firmware, how to doRecovery with paper clip.
Thank you
I just local upgrade to ATV Firmware, but i need to rollback to Official Firmware, how to doRecovery with paper clip.
Thank you
1. Copy update.zip to the root of a USB pen drive.
2. Insert the USB pen drive into any USB port of the Q10Pro/Q5Pro.
3. With the Q10Pro/Q5Pro turned off, use a paper clip to press and hold the the pinhole restore button on the back side of the Q10Pro/Q5Pro.
4. While keeping the RESTORE/UPGRADE button pressed, turn on the Q10Pro/Q5Pro.
5. The Q10Pro/Q5Pro will show an Recovery Rainbow Rings logo and proceed to upgrade the firmware.
6. The box will auto-reboot few times until finished.
7. First boot can take 4-5 minutes.
8. Wait 15 minutes after first boot to allow system and apps to initialize.
I just local upgrade to ATV Firmware, but i need to rollback to Official Firmware, how to doRecovery with paper clip.
Thank you
1. Copy update.zip to the root of a USB pen drive.
2. Insert the USB pen drive into any USB port of the Q10Pro/Q5Pro.
3. With the Q10Pro/Q5Pro turned off, use a paper clip to press and hold the the pinhole restore button on the back side of the Q10Pro/Q5Pro.
4. While keeping the RESTORE/UPGRADE button pressed, turn on the Q10Pro/Q5Pro.
5. The Q10Pro/Q5Pro will show an Recovery Rainbow Rings logo and proceed to upgrade the firmware.
6. The box will auto-reboot few times until finished.
7. First boot can take 4-5 minutes.
8. Wait 15 minutes after first boot to allow system and apps to initialize.
It not working , what version The Official FW it work ?
In case this helps, make sure the pendrive you are using is formatted to FAT32. This process will NOT work if the pendrive is formatted to EXFAT....and formatting to FAT32 in the later versions of Windows is a problem as they have deleted the ability. There is a freeware utility on the 'net called GUIFormat (https://www.softpedia.com/get/System/Hard-Disk-Utils/FAT32format-GUI.shtml) that works very well to get around this limitation.
In which version of Windows is it not possible to do this?All Win 10, when using larger than 32GB.
OK.In which version of Windows is it not possible to do this?All Win 10, when using larger than 32GB.
I just local upgrade to ATV Firmware, but i need to rollback to Official Firmware, how to doRecovery with paper clip.
Thank you
1. Copy update.zip to the root of a USB pen drive.
2. Insert the USB pen drive into any USB port of the Q10Pro/Q5Pro.
3. With the Q10Pro/Q5Pro turned off, use a paper clip to press and hold the the pinhole restore button on the back side of the Q10Pro/Q5Pro.
4. While keeping the RESTORE/UPGRADE button pressed, turn on the Q10Pro/Q5Pro.
5. The Q10Pro/Q5Pro will show an Recovery Rainbow Rings logo and proceed to upgrade the firmware.
6. The box will auto-reboot few times until finished.
7. First boot can take 4-5 minutes.
8. Wait 15 minutes after first boot to allow system and apps to initialize.
adb connect <ip_player>
adb root
adb connect <ip_player>
adb remount
adb shell "echo '127.0.0.1 localhost \n::1 ip6-localhost' > /system/etc/hosts"
adb reboot
https://www.mediafire.com/?58akd6hjzv5ga
Above link shows the v2.1.6 firmwares
Doesn't need to be differences between OFW and CFW, but as alternative root can try ROOT_SuperSU_v2.82_SR5_via_LAN (https://www.mediafire.com/?auuruv4px607yrz).yes, that works. I tried it when Magisk.zip didn't install. Thanks pcristi.
update&themed&Kodi18.2 v1.1-HMD-2.1.6 online (https://www.futeko.com/newforum/index.php?topic=812.msg31383#msg31383).
Now yes, please check.
I went back to your version 2.1.4. Do I need to install the official 2.1.6 first and then 2.1.6 custom? Maybe can I do it directly on 2.1.4?
Dear forum members,
Nothing seems to work and I do have a friendly request for anyone who can help me on a CORRECT ZIPPED FILE! I know it sounds ridiculous, but a couple of years ago somewhere in 2018 I bumped into the same problems.
Someone from the Netherlands (I think it was Julian and someone else) did sent me with a "file transfer app" a FW update and it worked instantly on my HM Q10!
It should be EXTRACTED by WinZip or WinRar or whatever. For some reason I can't non of the files extract correctly! So there is something wrong with te downloaded files. I know there are many forum members out there (and I am one of them) to explain that "rename" the unextracted file into "update zip", but it doesn't work in this case. It should save a lot of time than go to all suggestions and comments again, I'm 100% sure.
So, please, please anyone? ? ?
A BIG THANKS to you all! It is great to have a forum like this!
It was a problem with the configuration from Windows 10 as "stl" mentioned. every time when I opened the downloaded file I didn't noticed the wrong text "update.zip.zip". However I always have "View hidden items on, but I haven't noticed the wrong text.
I did update to CFW 2.1.7 which is nice, but how do I install all the other apps like YouTube smart tv, Aptoide etc. etc.? I'm a little confused now after my 2 days experience. What is the latest and best CFW until today? I have seen 2.1.6 updated and corrected by Pcristi, but I'm not sure.
Please, one more time support on my last question.
Not use Clean Task from HiMedia :D, just reboot box take around same amount of time.OK ;)
Yes, same as FW 2.1.4.Great, now i can install. Can I direct install via paperclip on 2.1.4 or should I do something in between first - 2.1.6?
Updated to official 2.1.6 and then flashed to custom 2.1.7 - both with paperclip:
1. Google play store was unstable and crashed a couple of times before finishing updates.
2. System went into a weird sleep mode (VFD on in white, but time is gone, and no picture) - and could not be awoken back. Only solution was to take power cord out, and reconnect and turn on. Happened after some time that it was left on (copying files). Happened at least twice.
Will update with any further conclusions/bugs as they come.
Thanks. (still happy that there are updates 5 years (!!) after this player has been released)
update_Q30_(update&themed&Kodi18.2)[v1.1]-HMD-2.1.7 2020-08-17.173031
update_Q5Pro_(update&themed&Kodi18.2)[v1.1]-HMD-2.1.7 2020-08-17.150032
update_Q10Pro_(update&themed&Kodi18.2)[v1.1]-HMD-2.1.7 2020-08-18.140128
(https://www.mediafire.com/convkey/b812/ju0r8txtkvtunbxzg.jpg?size_id=4)
Almost zero(0) changes vs CFW v2.1.6[1.x] (https://www.futeko.com/newforum/index.php?topic=812.msg31383#msg31383)
No have for Q100 ?
Changelog:
v1.1
- fix VPN settings crash.
v1.0
- update build number
- use OvSettingsUI that force WiFi always ON
( if need WiFi OFF use CFW v2.1.6[1.x] (https://www.futeko.com/newforum/index.php?topic=812.msg31383#msg31383) practically no difference between v2.1.7[v1.x] )
Note:
- dirty update from CFW v2.1.6[1.x] can run well.
Download link here (https://www.mediafire.com/?vqwdoz0xpnua5).
Recommendation of installed with paperclip.
Requirements OFW v2.1.6/v2.1.7 to be or was installed on box one time.
(https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX)
update_Q30_(update&themed&Kodi18.2)[v1.1]-HMD-2.1.7 2020-08-17.173031
update_Q5Pro_(update&themed&Kodi18.2)[v1.1]-HMD-2.1.7 2020-08-17.150032
update_Q10Pro_(update&themed&Kodi18.2)[v1.1]-HMD-2.1.7 2020-08-18.140128
(https://www.mediafire.com/convkey/b812/ju0r8txtkvtunbxzg.jpg?size_id=4)
Almost zero(0) changes vs CFW v2.1.6[1.x] (https://www.futeko.com/newforum/index.php?topic=812.msg31383#msg31383)
Changelog:
v1.1
- fix VPN settings crash.
v1.0
- update build number
- use OvSettingsUI that force WiFi always ON
( if need WiFi OFF use CFW v2.1.6[1.x] (https://www.futeko.com/newforum/index.php?topic=812.msg31383#msg31383) practically no difference between v2.1.7[v1.x] )
Note:
- dirty update from CFW v2.1.6[1.x] can run well.
Download link here (https://www.mediafire.com/?vqwdoz0xpnua5).
Recommendation of installed with paperclip.
Requirements OFW v2.1.6/v2.1.7 to be or was installed on box one time.
(https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX)
Hello, not sure what happened, but somehow the video player no longer works. I am on the custom 2.1.7 and it was working fine until yesterday. I get an error every time i try to play a file (does not matter which one, tried dozens and none worked that did work the day prior) from either the media center or within Kodi using the wrapper.
The Kodi player does play the same file.
Can someone post an apk of the video player so i can reinstall it? I would rather not reinstall the firmware and re-setup all my settings in Kodi and the Q10 if I don't have to. That took me hours.
Thank you!
Hi! the wrapper apk you can find here: http://www.mediafire.com/file/0h22goov27x9bk6/Wrapper-1.0.3_HMD_0411.apk
However, first check that the wrapper is configured correctly in terms of SMB access (user/pass) in your system. it zeroes out when you flash with a paper clip.
Also, if you want to retain all of your kodi settings and database, don't use the backup addon. Simply copy the entire hidden ".kodi" folder over to a backup location, and overwrite back with it after you flash.
Cheers.
update_Q30_(update&themed&Kodi18.2)[v1.1]-HMD-2.1.7 2020-08-17.173031
update_Q5Pro_(update&themed&Kodi18.2)[v1.1]-HMD-2.1.7 2020-08-17.150032
update_Q10Pro_(update&themed&Kodi18.2)[v1.1]-HMD-2.1.7 2020-08-18.140128
(https://www.mediafire.com/convkey/b812/ju0r8txtkvtunbxzg.jpg?size_id=4)
Almost zero(0) changes vs CFW v2.1.6[1.x] (https://www.futeko.com/newforum/index.php?topic=812.msg31383#msg31383)
No have for Q100 ?
Changelog:
v1.1
- fix VPN settings crash.
v1.0
- update build number
- use OvSettingsUI that force WiFi always ON
( if need WiFi OFF use CFW v2.1.6[1.x] (https://www.futeko.com/newforum/index.php?topic=812.msg31383#msg31383) practically no difference between v2.1.7[v1.x] )
Note:
- dirty update from CFW v2.1.6[1.x] can run well.
Download link here (https://www.mediafire.com/?vqwdoz0xpnua5).
Recommendation of installed with paperclip.
Requirements OFW v2.1.6/v2.1.7 to be or was installed on box one time.
(https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX)
Patch firmware Q10Pro, Q5Pro for Netflix 4K, Google Play, Youtube , Disney+ 4K : http://www.mediafire.com/file/kqgon53diima2i8/file
This patch firmware only works on Widevine L1, my latest firmware 2.1.7 is only L3 level. No 4K only SD.What is this patch for if it does not work on the existing firmware? which version does it work on?
CFW don't need that patch, patch are not compatible with CFW.This patch firmware only works on Widevine L1, my latest firmware 2.1.7 is only L3 level. No 4K only SD.What is this patch for if it does not work on the existing firmware? which version does it work on?
CFW don't need that patch, patch are not compatible with CFW.This patch firmware only works on Widevine L1, my latest firmware 2.1.7 is only L3 level. No 4K only SD.What is this patch for if it does not work on the existing firmware? which version does it work on?
Please discussed about it on topic for OFW v2.1.7.
https://www.futeko.com/newforum/index.php?topic=4864.0
On the other hand, with the same settings KODI is slow and the audio output only works in PCM ....CFW-Lite[MStyle] not intend to be Lite-CFW, but OK some more pick from a second one.
lack of imperex menu accessThat are not enough?
update_Q30(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-11.155317
update_Q5Pro(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-04.154037
update_Q10Pro(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-03.153450
Online on mediafire (https://www.mediafire.com/?x93g71564n54f) details in OP (https://www.futeko.com/newforum/index.php?topic=812.msg32295#msg32295).
(https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX)
(https://www.mediafire.com/convkey/0aaf/dc6fmvddveixjxdzg.jpg?size_id=3)
update_Q30(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-11.155317
update_Q5Pro(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-04.154037
update_Q10Pro(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-03.153450
Online on mediafire (https://www.mediafire.com/?x93g71564n54f) details in OP (https://www.futeko.com/newforum/index.php?topic=812.msg32295#msg32295).
(https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX)
(https://www.mediafire.com/convkey/0aaf/dc6fmvddveixjxdzg.jpg?size_id=3)
This custom version is awesome! Thanks @pcristi!
I have one question, I was previously on 2.1.1 and there was an option on advanced settings that allowed the Q10 to automatically be shutdown after some time the TV was powered off, it was called HDMI Suspend Time (5 minutes, etc).
On 2.1.7 it seems there is a similar option, HDMI CEC, but it works on the other way. It power on and off the TV when the Q10 is power on or off.
Anyone knows if there is someway to have the previous option back, or maybe is hidden somewhere else? I prefer the previous option as I don't always want to shutdown the TV when i power off the Q10. But I do want to shutdown the Q10 when I power off the TV, that was basically was the thing that the old option allowed.
Thanks!
OK, a few days now on CFW 2.1.7, with framerate and samba patches...I had the same problem with HDMI Handshake issues as well, I fixed it by setting framerate switch adaptation OFF in "settings"
It seems it is less enjoyable, since many interrupts during movies (with wrapper) for handshakes on image, it can happen every 2 minutes or so... which is UNACCEPTABLE...
I setup framerate switch adaptation OFF in both settings of player and PQ in wrapper, maybe this is the cause.
I uninstalled framerate switch patch, also.
Will post results. If not working, back to 2.1.4 with new mediaplayer app...
What could be causing this, is in many films, series, more or less...
Cheers.
It's a bug on Google Android 7.0 witch need work around on code/smali of AppManager that is over me knowledge.
If you can't use with English setting then try CS-AK CFW HMD 2.1.7 [MStyle] (https://www.futeko.com/newforum/index.php?topic=4275.msg32594#msg32594).
It's a bug on Google Android 7.0 witch need work around on code/smali of AppManager that is over me knowledge.How does AppManager behave in Spanish, French, and Japanese? does it also give errors?
If you can't use with English setting then try CS-AK CFW HMD 2.1.7 [MStyle] (https://www.futeko.com/newforum/index.php?topic=4275.msg32594#msg32594).
ah, ok. if it has CEC settings also?Yes, expectation for CEC is to work in same mode as in OFW/CFW.
Sorry, a bit off topic :).Thanks for your help all the time. Wishing you good health and success in life!
Mediafire annual subscription are successfully renew.
Special thanks to Administrator for great support over more then 6 years on Q10/Q5Pro box and more then 12 years on HiMedia products.
Thanks to everyone which helps with mediafire annual subscription.
Enjoy media collection on HiMedia players.
(https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX)
(https://www.mediafire.com/convkey/0aaf/dc6fmvddveixjxdzg.jpg?size_id=3)
update_Q30(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-11.155317
update_Q5Pro(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-04.154037
update_Q10Pro(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-03.153450
Follow HiMedia CN OFW v2.1.7 2020-12-07 (https://bbs.himedia.cn/thread-228548-1-1.html) for box H2000 and H200 Pro (https://bbs.himedia.cn/thread-228425-1-1.html)
(https://www.mediafire.com/convkey/15ee/k3v44qui79c1qe1zg.jpg?size_id=4)
(https://www.mediafire.com/convkey/4136/4is6snt7giwnr3izg.jpg?size_id=4)
(https://www.mediafire.com/convkey/900c/u312pnves920qqfzg.jpg?size_id=4)
(https://www.mediafire.com/convkey/ffc5/s2sbhv3x1nl9frrzg.jpg?size_id=4)
Google translation of Chinese log
1. Solved the problem of no sound when some 8k power amplifiers were placed in transparent transmission mode.
2. Solved the problem of black screen playback of irregular resolution videos of national K song.
3. Adjusted the time offset of external subtitles to positive or negative 60 seconds.
4. Support the global setting of subtitle position.
5. Solve the problem that some film sources in some overseas apps have sound but no image.
6. Poster: Support BDMV catalog fan art, Logo, original name and alias display.
7. Poster: Support video sticking function.
8. Improve CEC compatibility.
9. Cloud UI supports auto play and mouse functions.
10. Optimized the system and solved several bugs.
Changes vs OFW HMD-2.1.7 2020-12 CN build
v1.1
- add:
-- swap 1024MB
-- HDD sleep 120 seconds
-- Clock
-- Backdrop
-- DayDream with default Clock
-- DayDream active when HiMediaVideoPlayer pause
-- Screen Saver options on Android Setting/Display.
- Make visible Android Setting on AppManager like that can set WiFi OFF until user open HiTV Settings.
(Similar effects can get as go to HiTV Settings/Advance/WiFi OFF and press home menu).
- Force GMS permissions for Contacts and Phone --> that allow use link account on others apps like Netflix
- Q30 build base on CN HD920BIII HMD-2.1.7 2020-12 (https://bbs.himedia.cn/thread-228568-1-1.html).
v1.0
-- translate wallpaper name
-- fix folder list on MediaCenter LAN
-- add Pixel Icon Pack 2 to AppManager
(https://www.mediafire.com/convkey/477c/znbpieuh0uo0cpwzg.jpg?size_id=4)
(https://www.mediafire.com/convkey/4c2b/7e90r198878colizg.jpg?size_id=4)
(2020-12-20)
Removed:
-- Chinese application
-- HiChannelTV, HiStatistics
Add:
-- Kodi 18.2, Wrapper
-- OpenBlurayMode, PowerMenu
-- Live Wallpapers Picker
-- Long Home press open recent apps.
Fix:
-- Missing top menu in some apps
-- DTS passthrough for Kodi VideoPlayer.
Google Store...:
- Google apps need install additional patch (https://www.mediafire.com/?kqgon53diima2i8)
Good to know:
-- CFW-Lite intend to be closer as possible to OFW
-- MStyle FW support English and Chinese language
-- AppManager crash if Android language use comma as decimal separator
-- Long press UP open MStyle selection
-- Long press OK to remove favorite apps
-- Long press HOME open recent apps
-- System apps slider can't be customized, edit /system/etc/launcher/launcher*.xml if wanted
-- Wi-Fi always ON after reboot, is triggered by HiMedia setting
-- Not all fixes, changes, updates from others CFW are included
-- Dirty install from normal CFW/ATV/CS-AK to CFW-Lite[MStyle] is not supported.
Enjoy yours media collections.
Download link here (https://www.mediafire.com/?x93g71564n54f).
Recommendation of installed with paperclip.
For best results OFW v2.1.7 2020-08 to was or be installed on box at least one time.
Thanks to haovh_85 for help with download from baidu.
Please do not quote the entire post. Thanks for understanding.
Not one force you to try, install, test, CFW-Lite[MStyle] is yours choice and responsibility.
(https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX)
(https://www.mediafire.com/convkey/0aaf/dc6fmvddveixjxdzg.jpg?size_id=3)
-- Kodi 18.2, Wrapper
-- Kodi 18.2, Wrapper
As I remember on HiMediaVideoPlayer_1.2.60_HMD_1110 PGS subtitles setting are save it but top subtitle position error for PGS subtitle are present. HiMediaVideoPlayer_1.2.53_HMD_0226 is test build for check if global saving settings are solved not included on full FW.
Yes can install 1.2.53_HMD_0226 on OFW v2.1.7 for Q5Pro/Q10Pro/Q30/Q100.
PGS problems are explain by DMD here (https://www.futeko.com/newforum/index.php?topic=4847.msg31541#msg31541).
Have a nice summer time.
.....It is the models that I want above all H200 Pro with double HDMI output (audio only).
Follow HiMedia CN OFW v2.1.7 2020-12-07 (https://bbs.himedia.cn/thread-228548-1-1.html) for box H2000 and H200 Pro (https://bbs.himedia.cn/thread-228425-1-1.html).......
It is the models that I want above all H200 Pro with double HDMI output (audio only).
Why are the products I look for you can't find on the market, there is no sales channel for Europe? :'(
http://www.himedia.cn/prod_view.aspx?TypeId=32&Id=222&FId=t3:32:3
Thanks for your response atkinsom,
I really don't understand what's going wrong.
I found a stick of 4GB.
I formatted it with FAT32.
Then put the following file on the stick:
update_Q10Pro(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-03.153450
I gave the file a new name:
update.zip
first disconnected the power (plug from the back).
I put the USB stick in the USB blue port.
Hold the button down with a pepper clip, plug it in and then count to 15 sec with the pepper clip holding the button. button released after 15 sec when a circle was already on TV.
End of story, the Q10 cleared all my extra apps from the device and I still see the old screen and data as I described in my previous post above.
Could someone tell me where this is going wrong?
Am I not doing the actions right?
Can I do an update with this file:
update_Q10Pro(CFW-Lite[MStyle])[1.1]-HMD-2.1.7 2020-12-03.153450
I myself live in the Netherlands, Rotterdam.
Is there someone nearby who can help me?
How to turn up the sound on Q5 pro with 2.1.7?
About
These firmwares are created voluntarily by forum user pcristi. Show your appreciation by buying him a...
(https://www.mediafire.com/convkey/02e5/k12efhxnxhhhbmazg.jpg?size_id=2) (https://ko-fi.com/A2322OIX)
All of pcristi's firmwares are available from his Mediafire account: https://www.mediafire.com/?kvlryqpyzcac3
Installation Instructions
The method is slightly different to our official firmware downloads. For these firmwares, you must rename the downloaded zip file to update.zip.
FIRMWARE INSTALL CAN TAKE UP TO 20 MINUTES. DO NOT POWER OFF DURING INSTALL. WAIT FOR THE HOME SCREEN TO APPEAR.
1. Rename firmware update .zip (e.g. update_Q(...)Pro_(...)_HMD-1.0.8(...).zip) to update.zip.
2. Copy update.zip to the root of a USB pen drive.
3. Insert the USB pen drive into any USB port of the Q10/Q5Pro.
4. With the Q10/Q5Pro turned off, use a paper clip or pen to press and hold the the pinhole restore button on the back side of the Q10/Q5Pro.
5. While keeping the RESTORE/UPGRADE button pressed, turn on the Q10/Q5Pro.
6. The Q10/Q5Pro will show an Android logo and proceed to upgrade the firmware.
7. The box will auto-reboot when finished.
8. First boot can take 4-5 minutes.
9. Wait 15 minutes after first boot to allow system and apps to initialise.
(http://www.futeko.com/productimages/MP068-1.jpg) (http://www.futeko.com/productimages/MP067-1.jpg) Q10 Pro + Q5 Pro
Seperate downloads for Q10 and Q5 Pro.
Make sure you select the correct one for your machine.
Read the instructions carefully.
*** pcristi Custom Firmware ***
Based on regular official firmware. Includes interface enhancements, updated apps, and some of the pcristi patches (e.g. Samba speed enhancement).
See individual forum entries for details.
All of pcristi's firmwares are available from his Mediafire account: https://www.mediafire.com/?kvlryqpyzcac3
Android 7: 2.1.7 (https://www.mediafire.com/?kvlryqpyzcac3#vqwdoz0xpnua5), 2.1.6 (https://www.mediafire.com/?kvlryqpyzcac3#jbrvehcnc5qmh), 2.1.4 (https://www.futeko.com/newforum/index.php?topic=812.msg28699#msg28699), 2.1.2 (https://www.futeko.com/newforum/index.php?topic=812.msg28266#msg28266), 2.1.1 (https://www.futeko.com/newforum/index.php?topic=812.msg26994#msg26994), 2.1.0 (https://www.futeko.com/newforum/index.php?topic=812.msg26089#msg26089), 2.0.8 (https://www.futeko.com/newforum/index.php?topic=812.msg23614#msg23614), 2.0.7 (http://www.mediafire.com/file/lxai24msocr0me4/update_Q10Pro_%28update%26themed%26Kodi17.6%29-HMD-2.0.7_2018-01-12.113104.zip), 2.0.6 (https://forum.softpedia.com/topic/1056055-himedia-q5q10pro-android-511android-70-box-tv/page__st__774#entry21904623), 2.0.5 (https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__738#entry21709293), 2.0.4 (https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__702#entry21402864), 2.0.1 (https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__666#entry21010212)
Android 5: 1.1.0 (https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__648__gopid__20954836#entry20954836), 1.0.9 (https://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__486#entry20423474), 1.0.8 (http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__306#entry20046516), 1.0.7 (http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__144#entry19733664), 1.0.6 (http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__54#entry19556789), 1.0.3 (http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/page__st__54#entry19310814), 1.0.1 (http://forum.softpedia.com/topic/1056055-himedia-q10q5-pro-android-511-tv-box/#entry19199525)
*** pcristi Android TV Custom Firmware ***
pcristi full Android TV OS firmware: pcristi Android TV firmware thread (http://www.futeko.com/newforum/index.php?topic=2219.0)
*** CS-AK Custom Firmware ***
- Alkaid (http://4pda.ru/forum/index.php?showuser=1901872) for idea, new design, icon pack.
- pcristi for scripts, testing, assembly.
More customised version of the pcristi firmware with different launcher interface and apps: CS-AK custom firmware thread (https://www.futeko.com/newforum/index.php?topic=4275.0)
Hello,
I have the Q10 Pro with :
Version : 7.0
Android Security Patch Level : Jan 1, 2017
Kernel : 3.18.24_hi3798cv2x
Buld: HMD-2.1.7 2020-08-18.140128
I can't make Samba work.
When I scan the network, I can see the server but when I select the server, then nothing. It doesn't ask to connect to. empty screen.
When I try to Manualy connect the share, it act the same.
It's not a password issue as I can connect to it with my computers and my Nvidia Shield.
Thanks
Hello,
I have this little problem. So, after installing the latest version 2.1.7 I turn on my player and kodi everything is working perfectly but when it should actually open the movie for me to watch it, from the server NAS, it doesnt work (becuase of kodi).
I ask for advice or help.
Thank you very much